another pulley question

[spincobra03]

I found the lfp site for my lower pulley and I think im going with a 6 lb or maybe the 4, either way I couldnt find an alternator pulley on that site, anyone know where I can get one, also will that oulley require a puller?

[blk04cobra1]

Call LFP, they should have the alt. pullies. The alt. pulley does not require a puller, just a socket, but it's a little bit of a PITA to get to :thumbsup: . Oh and if you are doing your own crank pulley install, it's reversed threaded.

[InfamousSVT]

When Shannon (No 5 Oh) installed my lower pulley we just took it off and used a impact gun, much easier and took only a few minutes to take off replace the pulley and re-install. Good luck with the install.

[spincobra03]

An impact drill? could you go into more detail, so maybe I can tell my mechanic to help speed the process. thanks

[blk04cobra1]

if you're having a mech do it, he'll probably use an impact gun...basically it's a air gun with a lot of torque to remove those tough bolts:thumbsup:

[InfamousSVT]

if you're having a mech do it, he'll probably use an impact gun...basically it's a air gun with a lot of torque to remove those tough bolts:thumbsup:
Exactly what he said.