JLT What the........!!!

[03slidewayzSVT]

Someone please tell me how the JLT intake is done...please... The filter sticks 2 inches below toe fender ant it can't be pushed up any more!!!!! Whats the deal????? here's some pic's to show you what I mean......Thanks

[BlueOvalPower]

I think he gave you the wrong filter, mine wasn't that tall.

[03slidewayzSVT]

It says it's 9 inch filter and that is what it is so I don't know....:doubt:

[Pro-Dyno]

that filter will cause isues

[03slidewayzSVT]

the web site shows a 9 inch filter and that is what it is..... I don't know????

[03slidewayzSVT]

Dan whats the issues???? call me

[NO 5 OH]

that filter will cause isues

And why would that be exactly? I thought generally the more horsepower you make, the bigger the filter needed to be :doubt:

I see that you bought Jason's old JLT kit. From the pictures I see what you did wrong... apparently Jason didn't tell you what needed to be done in order to make it work. What you have to do is cut the four bolt mounting flange completely OFF the front of the meter... really all you have to do is cut off the square corners and smooth up the end of the MAF. The filter HAS to fit directly on the end of the meter in order to fit. I had to take an addtional 1" off the bottom of the hardpipe itself (sawsall and some grinding) in order to get everything in the fenderwell and the slash sheild to fit properly. It still doesn't go up like it did from the factory, but it's damn close ;) You'll probably also have to trim one of the intercooler lines in the fenderwell going to the heat exchanger as it's a little too long to get the filter to fit.

You can also forgoe all of this and call Jay and get a six inch filter and it will fit in there with no modification to the end of the MAF. I think a six inch filter is between 40 and 50 bucks. Either way will fix your problem :thumbsup:

Hope this helps,

Shannon

[Ram77mus]

that filter will cause isuesTHE PROBLEM WILL BE WITH THE AIR SLAMING INTO THE FILTER -IT WILL MESS WITH THE FUEL TRIMS WHEN DRIVING AROUND- JUST LIKE A RAM AIR KIT CAN- DON'T DRIVE IT WHEN IT RAINS

[venomous]

Why not buy a regular sized filter? Mines wasn't that large? :doubt:

[03slidewayzSVT]

no matter what filter I use it will still have the hole next to the driving light.....and I don't drive in the rain unless I get stuck in it...

[03slidewayzSVT]

Well finally got JLT to work and got the car retuned tonight by PRO-DYNO and the car pick up...485 rwhp and 503 rwtq:thumbsup: :thumbsup: next cat-back, 2.5 gal intercooler box and stage 4 port:D ... PRO-DYNO is the BEST!!!!!! thanks again Dan and Rob for staying out late:D Can't wait to see what it will do at THE ROCK on saturday ON street tires!!!!!! Cant even wait...........:)

[Pro-Dyno]

you are crazzzzzy!:D

[Ram77mus]

Well finally got JLT to work and got the car retuned tonight by PRO-DYNO and the car pick up...485 rwhp and 503 rwtq:thumbsup: :thumbsup: next cat-back, 2.5 gal intercooler box and stage 4 port:D ... PRO-DYNO is the BEST!!!!!! thanks again Dan and Rob for staying out late:D Can't wait to see what it will do at THE ROCK on saturday ON street tires!!!!!! Cant even wait...........:)don't forget the drag radials

[blk04cobra1]

Can't wait to see what it will do at THE ROCK on saturday ON street tires!!!!!! Cant even wait...........:)
SPIN SPIN SPIN :thumbsup:...I predict a 2.2 60'...any takers?

[ORANGE CRUSH]

Well finally got JLT to work and got the car retuned tonight by PRO-DYNO and the car pick up...485 rwhp and 503 rwtq:thumbsup: :thumbsup: next cat-back, 2.5 gal intercooler box and stage 4 port:D ... PRO-DYNO is the BEST!!!!!! thanks again Dan and Rob for staying out late:D Can't wait to see what it will do at THE ROCK on saturday ON street tires!!!!!! Cant even wait...........:)



Those are great #s. What other mods do you have?

[03slidewayzSVT]

2.2 your wrong Torrey:p busted a 1.9 at Mooresville with a 7.8 @ 95MPH on street tires!!!!:D Crush all I have is 2.8 RR pulley, 4 piece billetflow Idler's, Mac Off-road H-pipe and JLT CAI.... and of course The best tune by PRO-DYNO:thumbsup:

[blk04cobra1]

congrats buddy...you're a better driver than I thought :thumbsup:

[03slidewayzSVT]

Thanks:D would you believe that was only my second time at any drag strip!!!! Rockingham here I come hoping for 11's on street tire's (hopefully):thumbsup: If not so what it's all fun just as long as nothing breaks:thumbsup:

[InfamousSVT]

And why would that be exactly? I thought generally the more horsepower you make, the bigger the filter needed to be :doubt:

I see that you bought Jason's old JLT kit. From the pictures I see what you did wrong... apparently Jason didn't tell you what needed to be done in order to make it work. What you have to do is cut the four bolt mounting flange completely OFF the front of the meter... really all you have to do is cut off the square corners and smooth up the end of the MAF. The filter HAS to fit directly on the end of the meter in order to fit. I had to take an addtional 1" off the bottom of the hardpipe itself (sawsall and some grinding) in order to get everything in the fenderwell and the slash sheild to fit properly. It still doesn't go up like it did from the factory, but it's damn close ;) You'll probably also have to trim one of the intercooler lines in the fenderwell going to the heat exchanger as it's a little too long to get the filter to fit.

You can also forgoe all of this and call Jay and get a six inch filter and it will fit in there with no modification to the end of the MAF. I think a six inch filter is between 40 and 50 bucks. Either way will fix your problem :thumbsup:

Hope this helps,

Shannon
Hey hey man, come on now :D . He called me that night and I told him exactly what you just wrote. I forgot all about that until he called me about it. The only reason I know this stuff is cause you are the one who I asked about installing mine........haha

Oh well ;)


Glad you got it worked out Adam and glad that you picked up some hp :thumbsup:

[03slidewayzSVT]

Thanks Jason, I had to cut the MAF and just push hard but I did get it to fit:thumbsup: Car picked up 25 rwhp and 10 rwtq across the board:thumbsup:

[mkkrs1]

why go to rockingham, bring it to carolina on the 25th and race with rest of us :D

[03slidewayzSVT]

Like I said I'd like to go but it's my fathers b-day and we are taking the boat out for the first time this year and having a cook out too....maybe the next one:thumbsup: