Dyno is in the ground!!!!

[blk04cobra1]

MM Performance purchased a Dyno last week and it's officially in the ground and will be operational this weekend. We will be tuning with SCT and Sniper software, so PM me for pricing :thumbsup: ...it was definitely not a job for the faint of heart...take a look




http://img.villagephotos.com/p/2004-11/874087/Dyno1_edited.jpg

12" concrete base reinforced with rebar



http://img.villagephotos.com/p/2004-11/874087/Dyno6_edited.jpg

Dynojet 248
http://img.villagephotos.com/p/2004-11/874087/Dyno2_edited.jpg

http://img.villagephotos.com/p/2004-11/874087/Dyno9_edited.jpg

Finally after 3 days of hard work...
http://img.villagephotos.com/p/2004-11/874087/Dyno11_edited.jpg

[InfamousSVT]

Sweet, so are you guys going to be doing your own tuning now? If so, that's great. :thumbsup: MM has come a long way, congrats to the team over there.

So whens the first Dyno day for the SCMC going to be planned? :D

[Big Daddy]

Congrats on getting it in the ground! Get her setup and we can come by and try to spin her until it pops!

I hope it works out well for you! :thumbsup: :thumbsup:

[blk04cobra1]

Congrats on getting it in the ground! Get her setup and we can come by and try to spin her until it pops!

I hope it works out well for you! :thumbsup: :thumbsup:
Thanks big guy...software reads to 1500hp/1500tq, so we've got a ways to go :thumbsup:

[puzzle13]

Well I guess I paid you guys way too much for the work you did for me! :eek: :D But really, congrats on the new toy! Maybe I will bring down the truck and see what numbers it can achieve. :bounce:

[blk04cobra1]

Well I guess I paid you guys way too much for the work you did for me! :eek: :D But really, congrats on the new toy! Maybe I will bring down the truck and see what numbers it can achieve. :bounce:
We didnt get the diesel program, so we'll only be able to see what kind of numbers it puts down...we plan on purchasing the diesel software in the future, but right now we just didnt see the demand for it...but you're more than welcome to get a new tune on the Cobra or '67 :thumbsup:

[Big Daddy]

What's top speed for the dyno?? Maybe I can't pop the HP and Torque settings but I MIGHT be able to pop the top speed! :eek: :eek: :cool: :thumbsup:

[blk04cobra1]

What's top speed for the dyno?? Maybe I can't pop the HP and Torque settings but I MIGHT be able to pop the top speed! :eek: :eek: :cool: :thumbsup:
200mph :bounce:

[JOKER]

havta put da Duce-N-Quarter up there. They call me speed racer...

[VenomSVT]

YAHTZEE!!!!!!!:bounce: Come on Torrey put that twin turbo on there and break it in right!:D

[RF Cobra]

That wont be high enough for Big Daddy. :eek:

200mph :bounce:

[blk04cobra1]

That wont be high enough for Big Daddy. :eek:
If he can hit 200mph, then i'll pay for his dyno run :thumbsup:

[Big Daddy]

If he can hit 200mph, then i'll pay for his dyno run :thumbsup:

Well now that sounds like a challenge! I'll take you up on that! Now we need a date for a dyno day! :thumbsup: :thumbsup:

[Linn@Amazon]

Congrats Torrey..:thumbsup:

[RF Cobra]

The white '03 that set speed records in the salt ran 203 mph with 614rwhp/612rwtq, so it's possible. :)


If he can hit 200mph, then i'll pay for his dyno run :thumbsup:

[Big Daddy]

The white '03 that set speed records in the salt ran 203 mph with 614rwhp/612rwtq, so it's possible. :)

Yep and I don't have aerodynamics to contend with so it's actually easier on a dyno!! :thumbsup: :thumbsup:

[Pro-Dyno]

Just Gear Ratio Limitations :thumbsup:

[03slidewayzSVT]

Just Gear Ratio Limitations :thumbsup:

not if he rev's it to 10K in 5th gear:D

[Big Daddy]

No 6500 in 6th gear will get you 233 mph. If your tires are 27" in diameter, your gear ratio is 3.73 and your final drive ratio is .6 to 1. At least that's what this potential speed calculator says: http://www.csgnetwork.com/speedcalc.html

My question is HP and Torque don't matter??? I don't get it? Also this does NOT take into account the weight of the car. HMMM.....

Oh ya, the .6 to 1 is the ratio in 6th gear on the T56. :thumbsup:

[blk04cobra1]

Congrats Torrey..:thumbsup:
Thanks Linn...when are you guys having another get together? We need to get down to take a look at your shop :thumbsup:

[Linn@Amazon]

nothing soon..MD Global Dyno Day is Oct 14.. UMC Drag Day @WareShoals is this Sat Sept 16th@5PM

Rick said to give him a shout if you have any questions about the SCT or Sniper software