winddysvt
10-30-2007, 02:02 PM
For sale -
(the only stock parts we kept are the stock exhaust
and the stock shifter)
1998 FORD SVT Cobra Mustang
#3184 of 3480
224 made in this combination
Brt. Atlantic Blue / black top, black interior
:flash: 444 rwhp !!
Vortech SQ SC- Supercharging System, w/V-2 SQ SC-Trim, 1998 Ford 4.6 4-Valve Mustang Cobra, Polished Finish
ProM 80mm MAF (36# & SC calibration),
Fuel Pressure Gauge (Autometer phantom) Boost/Vaccum Gauge
255lph intank pump and T-Rex In-Line (External Pump)
36 lb. fuel injectors,
ProM 80mm MAF (36# & SC calibration), Fuel Pressure Gauge
polished inlet pipe
Ford Motorsports Gauge Pod
Jimmy LaRocca Chip
Ford Motorsports Gauge Pod
Timing Adjuster
Anderson Power Pipe
Braided connecting lines & fittings
Phantom gauges
:bounce:
Idle Air _Control Valve Compensator plate (manually adjustable)
(Supercharger installed by Victor Ford Motorsports, Wauconda, IL)
http://www.victorford.com/
KENNY BROWN SUSPENSION
(installation by Tim DalSanto)
springs, control arms, polyurethane bushings
Koni Adjustable shocks and struts
Rear Shock Tower Brace
aftermarket bump stop (polyurethane)
Extreme matrix bracing system
(professional welding done by Tim DalSanto) -
:bounce: :thumbsup:
Steeda Ultra Lite Chrome wheels (18 x 9),
Bridgestone S02's (265 X35 x 18 )
Kenny Brown Upper Strut Tower Brace (chrome)
KB Lower Brace,
Bassani Exhaust X pipe and Catbacks - heat guards removed - baffles removed
3 Alarm systems
Paint/Interior/Sound/Rust Protection,
Zaino
4.10 gears installed by Victor Ford... which by the way, made the car absolutely PERFECT!! The 4.10 gears should come standard!!)
Python alarm System with motion sensor
Pro 5.0 Short Throw Shifter
MGW shifter knob and chrome accessories (too many to list)
Maximum Motorsports Caster Camber plates - Chrome
Tinted windows
Hawk High Performance brake pads
Stainless Steel brake lines
Classic Design Concepts Light Bar
Lojack
Scott Winger Cobra Letters and numbers
SCMC sticker
SVTOA Sticker
MCOA Sticker
Snake emblem in the grill!
i know theres more, but I forgot......
Garage kept on a STINGER LIFT
& covered (in other words, BABIED & Loved). Engine/interior are so clean you could use as your kitchen table. :-) t......
Garage kept on a STINGER LIFT
http://www.geocities.com/winddysvt/StingerLiftPage.html& covered (in other words, BABIED & Loved). Engine/interior are so clean you could use as your kitchen table. :-)
http://www.vortechsuperchargers.com...080s_engine.gif (http://www.vortechsuperchargers.com...080s_engine.gif/)[/QUOTE][/QUOTE][/QUOTE]
(the only stock parts we kept are the stock exhaust
and the stock shifter)
1998 FORD SVT Cobra Mustang
#3184 of 3480
224 made in this combination
Brt. Atlantic Blue / black top, black interior
:flash: 444 rwhp !!
Vortech SQ SC- Supercharging System, w/V-2 SQ SC-Trim, 1998 Ford 4.6 4-Valve Mustang Cobra, Polished Finish
ProM 80mm MAF (36# & SC calibration),
Fuel Pressure Gauge (Autometer phantom) Boost/Vaccum Gauge
255lph intank pump and T-Rex In-Line (External Pump)
36 lb. fuel injectors,
ProM 80mm MAF (36# & SC calibration), Fuel Pressure Gauge
polished inlet pipe
Ford Motorsports Gauge Pod
Jimmy LaRocca Chip
Ford Motorsports Gauge Pod
Timing Adjuster
Anderson Power Pipe
Braided connecting lines & fittings
Phantom gauges
:bounce:
Idle Air _Control Valve Compensator plate (manually adjustable)
(Supercharger installed by Victor Ford Motorsports, Wauconda, IL)
http://www.victorford.com/
KENNY BROWN SUSPENSION
(installation by Tim DalSanto)
springs, control arms, polyurethane bushings
Koni Adjustable shocks and struts
Rear Shock Tower Brace
aftermarket bump stop (polyurethane)
Extreme matrix bracing system
(professional welding done by Tim DalSanto) -
:bounce: :thumbsup:
Steeda Ultra Lite Chrome wheels (18 x 9),
Bridgestone S02's (265 X35 x 18 )
Kenny Brown Upper Strut Tower Brace (chrome)
KB Lower Brace,
Bassani Exhaust X pipe and Catbacks - heat guards removed - baffles removed
3 Alarm systems
Paint/Interior/Sound/Rust Protection,
Zaino
4.10 gears installed by Victor Ford... which by the way, made the car absolutely PERFECT!! The 4.10 gears should come standard!!)
Python alarm System with motion sensor
Pro 5.0 Short Throw Shifter
MGW shifter knob and chrome accessories (too many to list)
Maximum Motorsports Caster Camber plates - Chrome
Tinted windows
Hawk High Performance brake pads
Stainless Steel brake lines
Classic Design Concepts Light Bar
Lojack
Scott Winger Cobra Letters and numbers
SCMC sticker
SVTOA Sticker
MCOA Sticker
Snake emblem in the grill!
i know theres more, but I forgot......
Garage kept on a STINGER LIFT
& covered (in other words, BABIED & Loved). Engine/interior are so clean you could use as your kitchen table. :-) t......
Garage kept on a STINGER LIFT
http://www.geocities.com/winddysvt/StingerLiftPage.html& covered (in other words, BABIED & Loved). Engine/interior are so clean you could use as your kitchen table. :-)
http://www.vortechsuperchargers.com...080s_engine.gif (http://www.vortechsuperchargers.com...080s_engine.gif/)[/QUOTE][/QUOTE][/QUOTE]