Post your GT 500 pics here! (And hp numbers, too)

[cobrabitn]

I thought this would be a cool thread just to see what kind of Shelby snakes we have out there! :thumbsup:

[Cobra4me]

here is mine. We did a baseline dyno pull this week. Stock with bassani axleback. 412hp/ 404tq on a mustang dyno



http://i5.photobucket.com/albums/y199/Robk17th/DSC_0481.jpg

http://i5.photobucket.com/albums/y199/Robk17th/DSC_0485.jpg

[Levi]

Only pic's I have right now, had to use the camera from work. Hope to get a friend or two to take some better one's real soon.


http://www.svtcobraclub.com/forums/vbgarage.php?do=getimage&id=517
http://www.svtcobraclub.com/forums/vbgarage.php?do=getimage&id=518
http://www.svtcobraclub.com/forums/vbgarage.php?do=getimage&id=519
http://www.svtcobraclub.com/forums/vbgarage.php?do=getimage&id=520

[cablernc]

Here's mine!

[NJ2000R]

getting a proper break-in at VIR :cool:

http://i48.photobucket.com/albums/f208/OUTLAW1970/2008-05-29_00018.jpg

[msmap]

here is mine. We did a baseline dyno pull this week. Stock with bassani axleback. 412hp/ 404tq on a mustang dyno



Isn't that kind of a low number? Most stock GT500s are in the 430+ rwhp range. Was it dynoed in 4th? Mine dynoed at 437.

[blk04cobra1]

Isn't that kind of a low number? Most stock GT500s are in the 430+ rwhp range. Was it dynoed in 4th? Mine dynoed at 437.
Depends on what type of dyno...looks like Robbie's was on a Mustang Dyno which tends to show more of a "real world" number b/c it's a loaded dyno (like driving it on the street)...Dynojet numbers tend to be a little bit more elevated :thumbsup:

[msmap]

Yes, but 412 seems a bit lower for a GT500 from the results I have seen and read :dunno:

[blk04cobra1]

Yes, but 412 seems a bit lower for a GT500 from the results I have seen and read :dunno:
true, I cannot remember what % people use on the Mustang vs Dynojet dyno's, but if it's 10%, then the 412rwhp seems pretty realistic...

[Angel]

I thought this would be a cool thread just to see what kind of Shelby snakes we have out there! :thumbsup:
The Site will not allow me to post attachments. How does one go about acquiring that ability?

Would a link to a photo host site be sufficient?

[Cobra4me]

updated pics

http://i5.photobucket.com/albums/y199/Robk17th/DSC_0515.jpg

http://i5.photobucket.com/albums/y199/Robk17th/DSC_0517.jpg

http://i5.photobucket.com/albums/y199/Robk17th/DSC_0514.jpg

http://i5.photobucket.com/albums/y199/Robk17th/DSC_0511.jpg

[cobrabitn]

Try it now Angel!! :thumbsup:

[blk04cobra1]

looks good Robbie...you didnt cut those springs did you? ;)

[Angel]

Try it now Angel!! :thumbsup:
:bounce: Thanks! :cheers: :angel: From her first photoshoot in August '06.

[Cobra4me]

looks good Robbie...you didnt cut those springs did you? ;)haha no I used BMR springs

[blk04cobra1]

haha no I used BMR springs
looks good man :thumbsup:

[Elapid]

The one time that it was standing still and not on the track!
http://i342.photobucket.com/albums/o409/Elapid_photos/Mustang_Show_07_189.jpg?t=1215703264

http://i342.photobucket.com/albums/o409/Elapid_photos/Mustang_Show_07_191.jpg?t=1215703404 (http://javascript%3cb%3e%3c/b%3E:void(0);)

[tlitz]

http://i197.photobucket.com/albums/aa314/GT500HP/ImportedPhotos00325.jpg

http://i197.photobucket.com/albums/aa314/GT500HP/LasVegasShelbySema93.jpg

http://i197.photobucket.com/albums/aa314/GT500HP/TLitz25.jpg

[rleard]

This one of my little girl's
07 CS Cobra, 56 Contiental the queen, 31 Chev, 07 Calif. special, 59 Skylliner,and a few others.
The differance between men and boys, is the price of there toys.
The pictures went to never never land.

[3ponies]

My 68 Fak Snak GT500 Vert Clone is gone! I have moved up 40 years to a 08 GT500 Vert. I am really liking this car and have tons of questions of anyone who has installed the Ford Racing Performance or Drag Pack.
I have hung around this Forum for years with my 07 Roush but now I have Jack & Shell in the garage! On the Performance Packs:Here is Power Pack #1 that takes the car to the same output as a GT500KR.
I hear you can't go wrong with the FRPP power package and it won't void the warranty if installed by the dealer.
http://www.fordracingparts.com/part...rtKeyField=9968 (http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=9968)

Number 2 has more cool stuff, but no rear exhaust and I can’t find a HP rating. I also don’t know if I was going to switch gears why I would only go to 373s and not 410s. The 6 speed is pretty effortless on the highway. Also will the shorty headers work on the current exhaust??

2007-08 SVT MUSTANG DRAG PACK

M-2007-FR2SVT*
http://www.fordracingparts.com/part...tKeyField=10023 (http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=10023)

So those are today’s questions! Any suggestions where to seek answers? Happy to be on the GT500 board!
If you can't see the pictures in this email, click here to see it in a web browser:
http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)

http://www.kodakgallery.com/images/invisible.gif




http://www.kodakgallery.com/images/invisible.gif

Richard has shared photos with you.


http://www.kodakgallery.com/images/invisible.gif

[/url]

[url="http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US"]http://www.kodakgallery.com/images/invisible.gif (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)


http://www.kodakgallery.com/images/invisible.gifhttp://images.kodakgallery.com/servlet/ShareServlet/1742966711/photos3961/3/78/84/75/25/4/425758478306_0_ALB.jpg (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)

08 GT500 comes home


(1 album)

http://www.kodakgallery.com/images/invisible.gif

http://www.kodakgallery.com/images/invisible.gif
One less old one, one more new one. The Fak Snak 68 Clone went for this GT500!
Rick

- Richard




View photos (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)

[Angel]

Congrats on the new GT500! :thumbsup: +1 On the experiance with both the Roush and the GT500 :cheers:

[cobrabitn]

Nice Ride Rich! Great garage to have too, a Roush and a Shelby. What a rush............. :D

[blk04cobra1]

Rick,

I know it won't void the warranty if you have it installed by the dealer, but for $2k, you could get a lot of aftermarket parts with more power. IMO, I would go with a JLT carbon fiber intake, then a smaller pulley on the blower, with a custom dyno tune. These two easy bolt on's should net you in the low-mid 500 rwhp range and cost less than $2k. Then you could add some suspension parts on top of that. The FRPP shorty headers will bolt to the factory exhaust, but I would save the headers for when your pushing more power.

check this out and they are a sponsor on the board:

http://jlttruecoldair.com/zencart/index.php?main_page=product_info&products_id=115

[puzzle13]

You need to contact Vernon Banks aka Sandman! He has changed the pulley, CAI, headers, exhaust, xpipe, suspension, gearing, etc. I think he is currently running 600rwhp and he abuses that car at the track. Most of his work was done by Dan @ ProDyno and a few lowly mechanics at Junior's Garage in Apex, NC. His car is really fast, but it still can't hang with the real deal 03 Terminator Cobra!!:D

My 68 Fak Snak GT500 Vert Clone is gone! I have moved up 40 years to a 08 GT500 Vert. I am really liking this car and have tons of questions of anyone who has installed the Ford Racing Performance or Drag Pack.
I have hung around this Forum for years with my 07 Roush but now I have Jack & Shell in the garage! On the Performance Packs:Here is Power Pack #1 that takes the car to the same output as a GT500KR.
I hear you can't go wrong with the FRPP power package and it won't void the warranty if installed by the dealer.
http://www.fordracingparts.com/part...rtKeyField=9968 (http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=9968)

Number 2 has more cool stuff, but no rear exhaust and I can’t find a HP rating. I also don’t know if I was going to switch gears why I would only go to 373s and not 410s. The 6 speed is pretty effortless on the highway. Also will the shorty headers work on the current exhaust??

2007-08 SVT MUSTANG DRAG PACK

M-2007-FR2SVT*
http://www.fordracingparts.com/part...tKeyField=10023 (http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=10023)

So those are today’s questions! Any suggestions where to seek answers? Happy to be on the GT500 board!
If you can't see the pictures in this email, click here to see it in a web browser:
http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)

http://www.kodakgallery.com/images/invisible.gif




http://www.kodakgallery.com/images/invisible.gif

Richard has shared photos with you.


http://www.kodakgallery.com/images/invisible.gif



http://www.kodakgallery.com/images/invisible.gif (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)


http://www.kodakgallery.com/images/invisible.gifhttp://images.kodakgallery.com/servlet/ShareServlet/1742966711/photos3961/3/78/84/75/25/4/425758478306_0_ALB.jpg (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)

08 GT500 comes home


(1 album)

http://www.kodakgallery.com/images/invisible.gif

http://www.kodakgallery.com/images/invisible.gif
One less old one, one more new one. The Fak Snak 68 Clone went for this GT500!
Rick

- Richard




View photos (http://www.kodakgallery.com/I.jsp?c=ske52lq.2udc9yaq&x=0&y=p74fz6&localeid=en_US)

[3ponies]

I had an 03 10th Terminator and still miss it. Love the GT500 and I just want to add some of the Ford Racing KR upgrades. I will use the Roush Stage 3 for the track and Mods. I have made a basic mod list and now need to do homework. OK, I am a sissy man and my list is all Ford Racing Warranty Approved stuff!

Thanks again, I will have the Roush at the Woodward Cruise and the Gingerman event in September. Hope to see some of you there.
Rick

[puzzle13]

It's only warranty approved if a Ford Dealer installs it as I was told. Just make sure you get the right info.

I had an 03 10th Terminator and still miss it. Love the GT500 and I just want to add some of the Ford Racing KR upgrades. I will use the Roush Stage 3 for the track and Mods. I have made a basic mod list and now need to do homework. OK, I am a sissy man and my list is all Ford Racing Warranty Approved stuff!

Thanks again, I will have the Roush at the Woodward Cruise and the Gingerman event in September. Hope to see some of you there.
Rick

[gt500flyboy]

Some guy took my sig pic and photo shopped it for me...

http://i200.photobucket.com/albums/aa282/jhe12345/gt500flyboy-2.jpg

[cobrabitn]

John,

I really like that photo a lot!! :thumbsup:

[gt500flyboy]

John,

I really like that photo a lot!! :thumbsup:Thanks, chief. I blew it up and framed it. It's hanging on my 'Shelby' wall...

[3ponies]

Thanks, chief. I blew it up and framed it. It's hanging on my 'Shelby' wall...
Truly an excellent pic! Great job..

[cobrabitn]

I've been tossing around the idea of some dash plaques for "Cobra Alley" for our upcoming Parkway Ford show and both of those photos look like good candidates for the event. :thumbsup:

[3ponies]

It's only warranty approved if a Ford Dealer installs it as I was told. Just make sure you get the right info.
Yep, I was aware of this now the challenge is finding the right guy at the dealer to work with. The former service manager was as good as it gets but he has moved on.

My goal is do it all withing the Warranty and Ford Racing Guidelines.

Appreciate the pointers.,

[RF Cobra]

http://i6.photobucket.com/albums/y233/RFCobra/0c31c90d.jpg
Mine!

[Cobra4me]

mine as in Allan's new car?

[RF Cobra]

Not mine, hers. When I told her it was time to get out she told me no, and followed it up by telling me I had to go get her the key.


I am looking at something, but that's not what I'm looking at right now. I wouldn't mind adding a vert to the stable though.

[luvgun74]

Hey folks! I'm the proud new owner of an 08 Grabber orange shelby gt 500 and also new to the site! I don't have dyno numbers yet, but will definately post them as soon as i get mine on the dyno. Have pics to post as soon as i figure out how to attach them. :(

[NJ2000R]

Hey folks! I'm the proud new owner of an 08 Grabber orange shelby gt 500 and also new to the site! I don't have dyno numbers yet, but will definately post them as soon as i get mine on the dyno. Have pics to post as soon as i figure out how to attach them. :( welcome! and congrats! It's recommended that you store your photos on a photo hosting site such as supermotors.org or photobucket, which allow you to link to them on message boards.... :thumbsup:

[Cobra4me]

Hey folks! I'm the proud new owner of an 08 Grabber orange shelby gt 500 and also new to the site! I don't have dyno numbers yet, but will definately post them as soon as i get mine on the dyno. Have pics to post as soon as i figure out how to attach them. :(welcome to the site!

[luvgun74]

http://www.supermotors.net/getfile/677808/fullsize/003.jpg http://www.supermotors.net/getfile/677807/fullsize/002.jpg http://www.supermotors.net/getfile/677806/fullsize/001.jpg
Thanks again for the help. I will be looking forward to talking with you all about what next to add! =)

[cobrabitn]

Saaaaweeeet! :thumbsup:

[RF Cobra]

Welcome! Good looking Shelby. :thumbsup:


Hey folks! I'm the proud new owner of an 08 Grabber orange shelby gt 500 and also new to the site!

[luvgun74]

Thanks! The first mod i wan to do is an axle back setup. I've heard alot of them on youtube and i think i want to go with the SLP loudmouth. Anyone have any input on this? I'm a firm believer on "the louder the better" Slogan! :p Maybe even adding an o/r x-pipe soon thereafter.

[NJ2000R]

Thanks! The first mod i wan to do is an axle back setup. I've heard alot of them on youtube and i think i want to go with the SLP loudmouth. Anyone have any input on this? I'm a firm believer on "the louder the better" Slogan! :p Maybe even adding an o/r x-pipe soon thereafter. I added the SLP Loudmouth AB a few months ago, its great! loud, but not obnoxious, no drone....I'm sure it would be alot louder without cats, though....
I went through NJ inspection yesterday, no problems....in fact, it was a slow day, and 4 of the techs came over checking out the car, and busting on a fellow employee about the shelby vs. his honda :rotf: :rotf: :rotf:

[luvgun74]

Yeah i think SLP's is what i'll go for, thanks for the encouragement! LOL I've owned a 98 cobra, 01 Stage 3 roush, an 07 roush 427r, and now this Shelby and i must admit. This one is definately the best one to drive no doubt about it! =)

[fordcobra]

I thought this would be a cool thread just to see what kind of Shelby snakes we have out there! :thumbsup:
Please tell me how to send pictures of my Shelby.:dunno: :o
Thanks
Al

[NJ2000R]

Please tell me how to send pictures of my Shelby.:dunno: :o
Thanks
Al
It's recommended that you store your photos on a photo hosting site such as supermotors.org or photobucket, which allow you to link to them on message boards....

[cobrabitn]

Had a chance today to take a few pics!

[cobrabitn]

A few more... :D

[97CasperCobra]

very nice Tony....love that color!!!! My step-dad's friend got one in the same color combo last year and let me drive it....LOVE IT!!!!!! :thumbsup:

[NJ2000R]

nice, tony! :thumbsup: congrats! :D first mod should be bruce's brake ducts! ;)

[gt500flyboy]

Hey Tony - just realized you bought a GT500. Congrats - welcome to the club. Now - bring on the mods!!!!

[gt500flyboy]

http://i200.photobucket.com/albums/aa282/jhe12345/002-8.jpg
http://i200.photobucket.com/albums/aa282/jhe12345/006-10.jpg
http://i200.photobucket.com/albums/aa282/jhe12345/005-9.jpg
http://i200.photobucket.com/albums/aa282/jhe12345/009-9.jpg
http://i200.photobucket.com/albums/aa282/jhe12345/004-2.jpg
http://i200.photobucket.com/albums/aa282/jhe12345/011.jpg

[cobrabitn]

Looks very good John...I see you have been visiting the JLT website. :thumbsup:

Thanks for the congrats!

[Viper]

A few more... :D Looks like I'm your guinea pig for mods you may want to consider on an 09 Vista Blue GT500. You'll get a good idea of what your car will look and sound like with the exhaust, auto shield, and the motorsport racing springs at the end of Feb for the SVT gathering in Fort Mill. I had the springs installed along with the alignment last week at the dealership which lowered the car an inch or so and Steve is installing the auto shield tomorrow. I may have the JLT CAI by then... will have to wait and see. After that, I'll just play with her like she sits unless I see a nice set of wheels. I like the OZ Racing Raffaello III and Superleggera III wheels and just can't decide which ones to go with yet. :cheers:

[cobrabitn]

I'm looking forward to seeing your mods Viper, especially hearing that exhaust and seeing how low the car is because I want to lower mine. I think it sits waaaaay too high!

Steve will be doing my Shelby with the clear on it as soon as I can get the car to him. He wanted to have it done before the Pro-Dyno Cruise-In. :thumbsup:

[Viper]

I'm looking forward to seeing your mods Viper, especially hearing that exhaust and seeing how low the car is because I want to lower mine. I think it sits waaaaay too high!

Steve will be doing my Shelby with the clear on it as soon as I can get the car to him. He wanted to have it done before the Pro-Dyno Cruise-In. :thumbsup:
Just got my car back from Steve. It will take a few days and some heat (probably from a hair dryer) to have the protectant film to "cure" and seat correctly. He promised to stand by his work if and replace any of the pieces if I was unsatisfied for any reason and that is all you can ask for. Steve is a great guy and I have been pleased with his professionalism and the quality of his work.

I spoke with some of my friends in the road racing community who have put Mustangs on the track and they HIGHLY recommended the Ford Motorsport Racing springs to lower the Shelby. Eibach lowers the car a little too much according to the racers. Basically, the Shelby needs some body roll to get through the corners effectively. Too much body roll and you have understeer, too little and you will have over steer characteristics and the back end will tend to step out on you. So I went with their recommendation. The rear is still a little higher than I expected, however the car really sticks to the road in the corners now. I guess those racer types know what they are talking about!:bounce:

[NJ2000R]

I spoke with some of my friends in the road racing community who have put Mustangs on the track and they HIGHLY recommended the Ford Motorsport Racing springs to lower the Shelby. Eibach lowers the car a little too much according to the racers. Basically, the Shelby needs some body roll to get through the corners effectively. Too much body roll and you have understeer, too little and you will have over steer characteristics and the back end will tend to step out on you. So I went with their recommendation. The rear is still a little higher than I expected, however the car really sticks to the road in the corners now. I guess those racer types know what they are talking about!:bounce: I'm happy with the Ford Motorsport suspension pack on both my 07GT and 08GT500 for both street and road course use....I also know that the guys at Performance Auto Sport installed a full Griggs suspension, brake, and just about everything imaginable from Griggs on one of their customer's cars....I'm sure it wasnt cheap, but it is very impressive.... :thumbsup:

[acerothstien]

here is mine. We did a baseline dyno pull this week. Stock with bassani axleback. 412hp/ 404tq on a mustang dyno



http://i5.photobucket.com/albums/y199/Robk17th/DSC_0481.jpg

http://i5.photobucket.com/albums/y199/Robk17th/DSC_0485.jpgLove those wheels Sweet Ride !!!

[mcquik]

I have been unable to post an avatar picture on my signature ! Ideas ?

[cobrabitn]

Try it now...

[mcquik]

Couple of pic's before mods.

[mcquik]

Can I post my after mods information and pictures from a power point attachment. McQuik

[cobrabitn]

I'm not sure how the BB works, maybe Firme can answer that one..

[Tucker]

Here's mine:
http://www.jlttruecoldair.com/gallery/pictures/tn_VA%20Beach%20Car%20Show%20031.jpg
http://www.jlttruecoldair.com/gallery/pictures/tn_VA%20Beach%20Car%20Show%20033.jpg
http://www.jlttruecoldair.com/gallery/pictures/tn_VIR%20NOV%202008%20013.jpg

[mcquik]

Here are pictures of McQuik after mods!:)

[08 Mustang]

New here, below are a few pictures of my new GT500 that I bought a few weeks ago.

http://i532.photobucket.com/albums/ee324/calee_31/09%20Shelby%20GT500/Picture001.jpg

http://i532.photobucket.com/albums/ee324/calee_31/09%20Shelby%20GT500/Picture003.jpg

http://i532.photobucket.com/albums/ee324/calee_31/09%20Shelby%20GT500/Picture018.jpg

So far it's received a JLT CAI, 2.6 Metco Upper Pulley, Metco Double Bearing Auxillary Pulley, Eibach Pro-Kit, Borla Stingers, Clear Bra (front bumper, fenders & hood) and Custom Dyno Tune on a Mustang Dyno. The car ended up making 532rwhp & 514rwtq @ 14.2psi.

[cobrabitn]

Sweet...you just missed our cruise from Atlanta to Macon last weekend. :thumbsup:

[08 Mustang]

Sweet...you just missed our cruise from Atlanta to Macon last weekend. :thumbsup:
yeah, I just checked out the SE regional section and saw that :( ...how was it? Good turn out?

I'll definitely keep an eye out on that section for other upcoming events, and if I can make it , I will :thumbsup:

[MMX King Cobra]

Just adding my "baby" of 4 weeks: Stock GT500/SVT Cobra "stripe-delete" (no rocker or LeMans stripes; and no stripes on the black interior). Many magazines call the 2010 the "...fastest PRODUCTION car made in the World!" Hence, I call my MMX ("2010" in Roman Numerals) a "K I N G C O B R A"--NOT to be confused with the anemic 1978 King Cobra. This car runs 540 HP at 510 ft.-pds.:) :) :)

[cobrabitn]

Looks really good! Never saw a coupe without the stripes till now.... :)

[SVTMADMAN]

08 500 on asantis
http://farm3.static.flickr.com/2713/4121641489_25b06b19ee_o.jpg

[SVTMADMAN]

2nd favorite pichttp://farm3.static.flickr.com/2678/4122413906_5e6c15c225_o.jpg

[cobrabitn]

Looks good Shawn!! :thumbsup:

[Cobra4me]

Looks great and its unique. :thumbsup:

[SVTMADMAN]

/\ youres is sharp as hell too! I like the wheels very unique as well. (in a good way;) ) I was on the edge with the white wheels but it ended up looking great but a cleaning nightmare. I really hated that ford didnt paint the bottom of the car so i cleaned that up and also got rid of the truck mirrors for the 2010s...i may have a new KB LC if taxes work out in my favor. 700+rwhp coming up:cool:

[SVTMADMAN]

btw whats the opinion of side scoops and 1/4 window scoops on my car?

[Cobra4me]

btw whats the opinion of side scoops and 1/4 window scoops on my car?I think it really makes our cars look better. I have the cervinis side scoops and the silverhorse racing window louversI think they would look great on your car and makes our cars look better. I have the cervinis side scoops and the silverhorse racing window louvers :cool:

[RR03Cobra]

http://i25.photobucket.com/albums/c94/RR03cobra/shelbycar4.jpg

541 rwhp/535 rwt

[cobrabitn]

I like that red and silver combination!! :thumbsup:

[Sneakysnake]

Hello, new member. Here's my car. HP/TQ in signature. Really trying to work out logistics to get to the January event. Would be awesome.

[Cobra4me]

beautiful!!

[RR03Cobra]

http://i25.photobucket.com/albums/c94/RR03cobra/_MG_91521.jpg

[cobrabitn]

:thumbsup: Need to saturate your photo color a little more.. :)

[0201212]

First picture is pre mods. Getting baseline numbers at pro-dyno. The second is after mods. She has a VMP 2.59 pulley 90 mm idler, JLT CAI, Dyno tune by Dan at pro-dyno, dynomax 3 inch catback, eibach coil over kit, edelbrock adjustable upper control arm, and edelbrock adjustable panhard bar. Stock numbers were 464rwhp 482rwtrq, after mods and tune 563rwhp and 584rwtrq.

http://i1099.photobucket.com/albums/g390/stalnakerjames/8f543655.jpg

http://i1099.photobucket.com/albums/g390/stalnakerjames/a0a9bfbf.jpg

http://i1099.photobucket.com/albums/g390/stalnakerjames/3e8c33b2.jpg

[cobrabitn]

I never thought I would like the stripe delete on these cars but it looks real cool.

[0201212]

I never thought I would like the stripe delete on these cars but it looks real cool.

Thanks!!! She is a 1 of 27 for 2008 torch red coupes.

[55jonsey]

This is my 2008 Shelby Cobra GT 500. 602 HP/620 lbs. Torque at Pro-Dyno.
mods:
Posi ported blower
egr delete
2.6 upper, IW oversized balancer (16psi)
Kooks 1 3/4 longtubes and 3" mid pipe, 3" bassani exhaust
afco heat exchanger & moroso reservoir
frpp 373 gears
Hurst Shifter
tr6 plugs
JLT intake
metco Lower control arms
bmr panhard bar

I just got the SVT Certificate for the Shelby. #4243 of 6513 and #553 of 869.

[shelbygirl]

updated pics of my girl.

http://i193.photobucket.com/albums/z252/darciern/Super%20Snake/IMG_1652.jpg

http://i193.photobucket.com/albums/z252/darciern/Photo%20Shoot%202011/IMG_1998.jpg

660/610

[55jonsey]

Pro-Dyno Numbers.

[cobrabitn]

Those photos look really good. One of these days I'm going to get some more of mine without any trees growing out of them. :)

[55jonsey]

Just added a Hurst shifter and a Ford Motorsport Diff Cover.

[55jonsey]

I just got a new tune at Pro-Dyno. Dan is awesome. New Numbers:
623 HP
627 Torque

That was with 15 lbs of boost. Belt was slipping and I was loosing 2 lbs.

[cobrabitn]

Great numbers and nice mods, too!!!! :thumbsup:

[Snoopy 777]

Is this thread still going? :D

Some of my favorite pics...


http://i670.photobucket.com/albums/vv61/fastestshelby2/Daytona%202009%20pics/MKS_5597.jpg


http://i670.photobucket.com/albums/vv61/fastestshelby2/Daytona%202009%20pics/MKS_5689.jpg


http://i670.photobucket.com/albums/vv61/fastestshelby2/Daytona%202009%20pics/LMS_7816.jpg


http://i670.photobucket.com/albums/vv61/fastestshelby2/Daytona%202009%20pics/MK4_9678.jpg

[Snoopy 777]

http://i670.photobucket.com/albums/vv61/fastestshelby2/2011%20junk/DSC09630.jpg



Painted on stripes....


http://i670.photobucket.com/albums/vv61/fastestshelby2/2011%20junk/DSC09641.jpg


http://i670.photobucket.com/albums/vv61/fastestshelby2/2011%20junk/DSC09648.jpg


http://i670.photobucket.com/albums/vv61/fastestshelby2/2011%20junk/DSC09636.jpg


http://i670.photobucket.com/albums/vv61/fastestshelby2/2011%20junk/DSC09650.jpg

[Willis68]

602 HP at the wheels

My 2014 GT 500


http://i169.photobucket.com/albums/u219/rovmanwillis/image_zps530764eb.jpg

[RR03Cobra]

I have decided to sell my 2007 Shelby GT500. SO I bought an all black 2012 Shelby GT500:)

http://i25.photobucket.com/albums/c94/RR03cobra/dd49ccb6-dc4f-429f-bc3f-c53633d929d2_zps9hgwuw10.jpg (http://s25.photobucket.com/user/RR03cobra/media/dd49ccb6-dc4f-429f-bc3f-c53633d929d2_zps9hgwuw10.jpg.html)

[cobrabitn]

Very good!! Congrats on the new ride. You like it better then your 2007?

[Cobra4me]

wow this thread is a blast from the past, I wish I still had my 08 alloy GT500.

[shelbygt500]

It looks as though this thread need to be livened up a little. The pictures below are my pretty much stock 2012 GT500 S/D car. The only modes are a SHELBY heat exchanger/ Intercooler, BMR panhard bar and 50th Anniversary Alcoa wheels with Michelin Super Sport 285/35/20 on all four (4).

http://i245.photobucket.com/albums/gg62/manaboutown/2012%20Shelby%20GT500/10bab0b7-30d1-48f0-a5f5-ae5579fe6798.jpg (http://s245.photobucket.com/user/manaboutown/media/2012%20Shelby%20GT500/10bab0b7-30d1-48f0-a5f5-ae5579fe6798.jpg.html)
[/URL]
[URL=http://s245.photobucket.com/user/manaboutown/media/2012%20Shelby%20GT500/DSCN0117.jpg.html]http://i245.photobucket.com/albums/gg62/manaboutown/2012%20Shelby%20GT500/DSCN0117.jpg (http://s245.photobucket.com/user/manaboutown/media/2012%20Shelby%20GT500/DSCN0117.jpg.html)
http://i245.photobucket.com/albums/gg62/manaboutown/2012%20Shelby%20GT500/DSCN0119.jpg (http://s245.photobucket.com/user/manaboutown/media/2012%20Shelby%20GT500/DSCN0119.jpg.html)

[Mbiro594]

Just joined the group, have owned a 2003 Mustang GT premium in torch red, 2004 Redfire Cobra coupe, 2009 Shelby GT500 in vapor silver and now own a 2010 Shelby GT500.

Current modifications are: VMP 2.5 pulley, 90mm idler, JLT 123mm CAI, Roush Extreme Axle back, Ngauge with Lund tune, SVTPP wheels and 2013 Taillights. Let the addiction begin lol




https://preview.ibb.co/mMbVEv/Shelbyprofile.jpg (https://ibb.co/iFQOZv) hosting image (https://imgbb.com/)

https://preview.ibb.co/kFU6nF/Shelby_Rear.jpg (https://ibb.co/nwocuv)
hosting image (https://imgbb.com/)

[Cobra4me]

Good looking car!