brkntrxn
01-30-2009, 08:00 PM
SOLD SOLD SOLD
$500 obo - buyer pays shipping
(4) DOHC Houston Performance custom grind blower cams. Per Steve at HP, here are the specs as he has them listed on his original sheets:
- 470 lift
- 282 duration
- 114 lobe separation
These cams made 554rwhp on my 99 Cobra with a P1SC intercooled blower setup and ported-polished heads. They produce a good sounding, lumpy idle with good driveability (street, drag and road course). The cams were in the engine for about 11,000 miles.
I also have a set of springs and retainers that I will throw in with these. They are the original set and have about 22,000 miles on them.
For those that are curious, I changed to a naturally aspirated setup last Fall and went with a set of NA cams.
PM me here or send an email to brkntrxn@hotmail.com
http://i20.photobucket.com/albums/b238/brkntrxn/Parts%20for%20sell/IMG_7393.jpg
http://i20.photobucket.com/albums/b238/brkntrxn/Parts%20for%20sell/IMG_7395.jpg
$500 obo - buyer pays shipping
(4) DOHC Houston Performance custom grind blower cams. Per Steve at HP, here are the specs as he has them listed on his original sheets:
- 470 lift
- 282 duration
- 114 lobe separation
These cams made 554rwhp on my 99 Cobra with a P1SC intercooled blower setup and ported-polished heads. They produce a good sounding, lumpy idle with good driveability (street, drag and road course). The cams were in the engine for about 11,000 miles.
I also have a set of springs and retainers that I will throw in with these. They are the original set and have about 22,000 miles on them.
For those that are curious, I changed to a naturally aspirated setup last Fall and went with a set of NA cams.
PM me here or send an email to brkntrxn@hotmail.com
http://i20.photobucket.com/albums/b238/brkntrxn/Parts%20for%20sell/IMG_7393.jpg
http://i20.photobucket.com/albums/b238/brkntrxn/Parts%20for%20sell/IMG_7395.jpg