Tucker
03-23-2009, 04:42 PM
We are almost finished developing a JLT Brake cooling package for the 2007-2009 GT500. It will include 2.5” metal reinforced brake duct hose, custom aluminum brake backing plates (powder coated black) and all needed clamps and hardware. Options will be to add our JLT brake duct bezels to finish the look at a discounted price.
We use 2.5” hose due to the pre made brake duct housing on the GT500 bumper is 2.5”OD. Simply drill from the back side with a 2 ¼” hole saw and the hoses clamp right on the bumper housing. Then remove the wheels, calipers, rotors and factory backing plates. Use the existing hardware and install JLT’s custom backing plates and connect cooling hose. Reassemble brakes and wheel and your done, very simple install.
Prices:
JLT brake cooling kit $139.00 (FRPP kit is $319-up)
Add JLT brake bezels $50 (black or Silver) and $70 (polished) ($19 savings)
This is not made up of cheap junk parts, it’s just priced right!
We will have at least 10 kits ready to ship in the next couple weeks, but that can be increased if we have more interest.
Here is a shot of the proto type backing plates, the production units will be powder coated black.
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20010.jpg
Cool air needs to blow on the center of the rotor for even and productive cooling.
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20006.jpg
We use 2.5” hose due to the pre made brake duct housing on the GT500 bumper is 2.5”OD. Simply drill from the back side with a 2 ¼” hole saw and the hoses clamp right on the bumper housing. Then remove the wheels, calipers, rotors and factory backing plates. Use the existing hardware and install JLT’s custom backing plates and connect cooling hose. Reassemble brakes and wheel and your done, very simple install.
Prices:
JLT brake cooling kit $139.00 (FRPP kit is $319-up)
Add JLT brake bezels $50 (black or Silver) and $70 (polished) ($19 savings)
This is not made up of cheap junk parts, it’s just priced right!
We will have at least 10 kits ready to ship in the next couple weeks, but that can be increased if we have more interest.
Here is a shot of the proto type backing plates, the production units will be powder coated black.
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20010.jpg
Cool air needs to blow on the center of the rotor for even and productive cooling.
http://www.jlttruecoldair.com/gallery/pictures/tn_Brake%20cooling%20kit%20006.jpg