2000 Cobra R wing placement

mudmtncobra · 03-24-2006, 09:43 PM

I have a friend who has a GT and wants to mount a Cobra R rear wing exactly as an original Cobra R wing is mounted. Is there a template and if not, does anyone have the measurements?

Dave B. · 03-25-2006, 01:23 AM

I have a real "R" wing on my 03,
theres real no template, what there is are two indentations on the under side on the trunk. then there are two bolts that come down thru these two trunk indentations and then two molded fiberglass chunks that have the holes cut into them already and they are what realy hold the wing on the trunk,of course there are bolts that screw onto the bolts that go all the way thru the fiberglass molded pieces,

if its a Real Ford Racing Cobra "R" wing and not a cheap knock off then all the parts should have come with it,,,,

mudmtncobra · 03-25-2006, 08:51 PM

Thanks for the info. I will pass it on.

03-24-2006, 09:43 PM	#1
mudmtncobra Registered User Join Date: Feb 2006 Location: Dry Fork, VA Posts: 8	2000 Cobra R wing placement I have a friend who has a GT and wants to mount a Cobra R rear wing exactly as an original Cobra R wing is mounted. Is there a template and if not, does anyone have the measurements? __________________ Kevin Lori

03-25-2006, 01:23 AM	#2
Dave B. Registered User Join Date: Dec 2003 Location: Florida Posts: 479	I have a real "R" wing on my 03, theres real no template, what there is are two indentations on the under side on the trunk. then there are two bolts that come down thru these two trunk indentations and then two molded fiberglass chunks that have the holes cut into them already and they are what realy hold the wing on the trunk,of course there are bolts that screw onto the bolts that go all the way thru the fiberglass molded pieces, if its a Real Ford Racing Cobra "R" wing and not a cheap knock off then all the parts should have come with it,,,, __________________ 03 Cobra 10th Anniversary Red Stiegermeier Stage 4 ported Eaton 511.9 RWHP 467.7 RWTQ 2,76 Billetflow SC pulley Billetflow Aux-idler all billetflow idler pulleys Accufab single blade MAC cold air BBK Ceramic LT headers X-pipe Magnaflow exhaust Gordsford heat exchanger PST Carbon fiber drive shaft lowered 1.5 inches 18 X 9's AFS running Toyos 275/35/18's front 18 X 10.5's AFS running Toyos 295/35/18's rear Cobra "R" rear wing Cobra "R" hood 4:10 gears Pedator tuned Pro short shifter Hurst "T" handle Promotion Clutch Quad AEM widband gauge Boost & fuel Press gauges drilled & slotted rotors

03-25-2006, 08:51 PM	#3
mudmtncobra Registered User Join Date: Feb 2006 Location: Dry Fork, VA Posts: 8	Thanks for the info. I will pass it on. __________________ Kevin Lori

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)