Any suggestions on how to spend $4500

[InfamousSVT]

Originally Posted by blk04cobra1

Im just a short drive up in Charlotte, if you guys ever wanna come roam the streets up here...also, there is a dyno day down in Anderson, SC next weekend (feb. 5th) that I was planning on going to if any of you guys are interested...

I would like to go to this and get my car dyno'd again after I had my exhaust work done, but that is the same day as the Hilton's cookout!
- Maybe next time-

[NO 5 OH]

Ah... quit yer whinin' and come on and do it ya hoser

I'm actually going to the dyno day in Anderson with the Cobra... I'm hoping to go early enough in the morning to be done with enough time to head back home and make it to Robbie and Patti's place for the cookout.

Any guesses as to what the Cobra will put down Jason

Oh and Richard... I'll take you for a ride in the "Whipplecharged Cobra" if you'd like to have one in it... it'll definitely make you wanna buy that "black supercharger option" after you get back



Shannon

[InfamousSVT]

Originally Posted by NO 5 OH

Any guesses as to what the Cobra will put down Jason

I'm guessing since you dyno'd 613 hp at the wheels without a tune! You will be around 630rwhp +

About the cookout / dyno - How far away is the dyno place from the cookout? Richard is going to follow Trevor and me to the cookout, so I doubt I'll be at the dyno!

I'll keep you posted to what I dyno (stock = 362rwhp) I'll see you at the cookout and I'll line up next to you at dragday also (until the light goes green )
I won't be near you until I get my Black supercharger option put on, by the mid of next year! I may have some cams put in before the end of this year though!!

-Jason

[NO 5 OH]

Dang... I thought I was the only night owl around here

The dyno in SC is 2 1/2 hours from me... I'm gonna say two hours from you tops since you've got the 30 or so minute head start. Had it just been a regular dyno day I would have passed on it for the cookout... but since I'm in dire need of a tune right now and Rick is tuning I can't pass that up. Actually on the "street" tune it might put down less than what it did when I saw you last. Now the 110 octane tune for 21-22 psi...

Dude you should have been with me earlier tonight. I put the 3.20" Reichard non-slip on the Cobra with the 4lb lower still on... it saw 20 psi out on 321. This friggin' thing is getting to be a really fast mofo right now

Talk to ya soon.



Shannon

[InfamousSVT]

I'm actually at work, but night-owl is right!!
You've got to hear my exhaust, this thing sounds sweet! Plus if you look at my sig you can see some of the things I'll have by dragday installed. Look at my snakepit for what's already on it and awaiting install!

So Rick from Amazon Racing is doing the tune? If that's the case I might run by there! Is it on the way to the cookout or the opposite way? I'm not really sure how long it's going to take to get to the cookout.

[NO 5 OH]

Originally Posted by InfamousSVT

I'm actually at work, but night-owl is right!!
You've got to hear my exhaust, this thing sounds sweet! Plus if you look at my sig you can see some of the things I'll have by dragday installed. Look at my snakepit for what's already on it and awaiting install!

So Rick from Amazon Racing is doing the tune? If that's the case I might run by there! Is it on the way to the cookout or the opposite way? I'm not really sure how long it's going to take to get to the cookout.

Sorry mang... I was over on "another board" lookin' around

Robbie's house is actually opposite directions of where the dyno is. Anderson is down 85 past Spartanburg. Robbie's house is off I-40 aways... going towards Statesville. If you go then we can make it I'm sure... we'll just get there late

Rick from Amazon will be there doing the tuning. And yes I noticed mods that you have lined up... along with no Whipple I had a nice 3.00" pulley I'd sell you for the thing too

Let me know if you need any help installing any of the new parts you have ordered. I've pretty much done all the mods you're getting ready to do... and they're pretty commonplace with me now

[InfamousSVT]

Originally Posted by NO 5 OH

Rick from Amazon will be there doing the tuning. And yes I noticed mods that you have lined up... along with no Whipple I had a nice 3.00" pulley I'd sell you for the thing too

Let me know if you need any help installing any of the new parts you have ordered. I've pretty much done all the mods you're getting ready to do... and they're pretty commonplace with me now

Well, I've got some bushings for the front coming in on Monday, and I've still got my rear Control Arm bushings to put in! Want to help?

How much boost will that 3.00" pulley put out on the Whipple? I'm going to get one, just waiting on the money to be there!

[blk04cobra1]

Infamous, there are a few people heading down that way from up North I85, if you wanna join up...Im almost positive im going, since it looks to be nice weather...if anything, we could just meet up on 85 somewhere's...

[gnxs]

Originally Posted by InfamousSVT

How much boost will that 3.00" pulley put out on the Whipple?

18-19 psi.

[InfamousSVT]

Originally Posted by blk04cobra1

Infamous, there are a few people heading down that way from up North I85, if you wanna join up...Im almost positive im going, since it looks to be nice weather...if anything, we could just meet up on 85 somewhere's...

What time are you thinking about leaving for this? I'm going to see if I can make it! Post it here and I'll respond after I figure out what's going on. Do you have any idea how many cars are getting dyno'd/tuned?


Thanks GNSX for the info!

Shannon, if you still have that 3.00" pulley for the Whipple when I get mine, I'll take it off your hands ($)!

[blk04cobra1]

I was thinking about leaving Charlotte around 8am...puts me there at 10am...to you about 830am...i'll probably stick around til 2pm or so, just depends on how much we are having...