08-11-2005, 02:53 AM | #1 |
Registered User
|
Heads Solution
Ok, im about to have a good ammount of funding to fix my head problem....
Im going to need a few oppionions on what to do. Heads....... (1) AFR 165cc Street Heads 60cc pedestal mount (2) Edelbrock Performer 5.0 Cylinder Heads 1.90/1.60 (3) GT-40X XTRA Performance “TURBO-SWIRL” ALUMINUM CYLINDER HEADS CAms....... (1) FRPP E303 (2) FRPP F303 (3) Crane 2030 Camshaft 270 intake 270 exhaust .533 intake .544 exhaust (4) Crane 2040 Camshaft 282 intake 282 exhaust .498 intake .498 exhaust But!!!! This is my daily driver so i cant go all out like i want to do on it. ANy thoughs on what head/cam i should do? Thanks guys.......
__________________
Nitrous is like a hot girl with std’s… You know you want to hit it, but you’re afraid of the consequences |
08-11-2005, 12:52 PM | #2 |
Registered User
|
For the heads, if price doesn't matter tooo much, then I'd go with AFR's, they will also make the most power. If you can get the GT-40X heads for cheap they will make more power than the cast iron GT-40 that came with the Cobra.
Here is a chart of head flows: For a cam I would go with the Crane 2031, which is made for the Cobra that uses the 1.72 Cobra rockers. If you are going to change the rockers to 1.6, then the Crane 2030. |
08-23-2005, 09:35 PM | #3 |
Dr Jekyll on the street, Mr Hyde on the track
|
Looks like I'll be doing the AFR 185's.
__________________
Cobrabitn 2016 Ruby Red Metallic with Caribou accent F-350 Crew Cab Stump Puller! 6.7 Diesel Automatic with Chrome Package, Off Road Package, 3.55 Locking axles, and Ultimate Lariat Interior Trim Package! 2017 Shelby GT350 Coupe - track car! Mods: JLT True Cold Air oil catch can 2009 Vista Blue Shelby GT 500 Coupe - Garage Queen Tinted Windows JLT True Cold Air Kit Pro-Dyno Tune 526 rwhp - 511 rwtq 1994 Rio Red Indy Pace Car #22 "Runabout" Snake in the grill MGW shift knob 1996 SVT Cobra Wheels 1969 New Lime Mustang Mach 1 Sportsroof - Second owner - bone stock with shaker. One SVT Cobra, one Shelby GT500, one 69 mach 1, and a Shelby GT350 is better than nothing! Custom Data Plates for your Mustang or Ford! Buy "Cool Merchandise" at Data Plates Plus www.dataplatesplus.com See my MSR Video here! |
08-24-2005, 02:18 AM | #4 |
Registered User
|
I run GT-40X heads with some minor port work, 1.6 rockers, and an F303 cam. It makes awesome power above 3500 rpm, and pulls all the way to redline. It is very streetable, but took a little bit of getting used to at first, and dyno tuning. Sometimes i feel like i would like to have more power a little lower in the range for around towning. The muscle car sound from the cam is awesome, i love the lopey cam. I am going to have another chip made for it soon, i will post dyno results when i get them.
Most of this setup was on the car when i bought it. With the products that are out there now, i would probably go with a little bit differnt cam that made more low end torque, and AFR's.
__________________
1994 Rio Red Coupe #3564 304 ci, GT40X Aluminum Heads, Extrude Honed and Polished intake, Motorsport F303 cam, vortech fuel rails, 77 mm Pro-M mass air, 70mm BBK T-Body, Smog pump deletion, MSD and Perfomance distributors ignition components, Tremec 3550, Steeda Tri-axe, King Cobra/Centerforce clutch, Custom 3" Alum Driveshaft, 3.55 Gears, Griggs rear suspension w/torque arm & pan hard bar, Koni Red Shocks/Struts |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
|
|