another pulley question

spincobra03 · 02-27-2006, 09:00 PM

I found the lfp site for my lower pulley and I think im going with a 6 lb or maybe the 4, either way I couldnt find an alternator pulley on that site, anyone know where I can get one, also will that oulley require a puller?

blk04cobra1 · 02-28-2006, 09:31 AM

Call LFP, they should have the alt. pullies. The alt. pulley does not require a puller, just a socket, but it's a little bit of a PITA to get to

. Oh and if you are doing your own crank pulley install, it's reversed threaded.

InfamousSVT · 03-01-2006, 03:04 AM

When Shannon (No 5 Oh) installed my lower pulley we just took it off and used a impact gun, much easier and took only a few minutes to take off replace the pulley and re-install. Good luck with the install.

spincobra03 · 03-01-2006, 06:15 PM

An impact drill? could you go into more detail, so maybe I can tell my mechanic to help speed the process. thanks

blk04cobra1 · 03-01-2006, 07:24 PM

if you're having a mech do it, he'll probably use an impact gun...basically it's a air gun with a lot of torque to remove those tough bolts

InfamousSVT · 03-01-2006, 08:21 PM

Quote:

Originally Posted by blk04cobra1

if you're having a mech do it, he'll probably use an impact gun...basically it's a air gun with a lot of torque to remove those tough bolts

Exactly what he said.

02-27-2006, 09:00 PM	#1
spincobra03 Registered User Join Date: Dec 2005 Posts: 129	another pulley question I found the lfp site for my lower pulley and I think im going with a 6 lb or maybe the 4, either way I couldnt find an alternator pulley on that site, anyone know where I can get one, also will that oulley require a puller?

02-28-2006, 09:31 AM	#2
blk04cobra1 Registered User Join Date: Nov 2004 Location: Charlotte, NC Posts: 1,374	Call LFP, they should have the alt. pullies. The alt. pulley does not require a puller, just a socket, but it's a little bit of a PITA to get to . Oh and if you are doing your own crank pulley install, it's reversed threaded. __________________ 2004 Cobra HP Twin 67's 785rwhp on 9lbs of boost

03-01-2006, 03:04 AM	#3
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	When Shannon (No 5 Oh) installed my lower pulley we just took it off and used a impact gun, much easier and took only a few minutes to take off replace the pulley and re-install. Good luck with the install. __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

03-01-2006, 07:24 PM	#5
blk04cobra1 Registered User Join Date: Nov 2004 Location: Charlotte, NC Posts: 1,374	if you're having a mech do it, he'll probably use an impact gun...basically it's a air gun with a lot of torque to remove those tough bolts __________________ 2004 Cobra HP Twin 67's 785rwhp on 9lbs of boost

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-01-2006, 06:15 PM	#4
spincobra03 Registered User Join Date: Dec 2005 Posts: 129	An impact drill? could you go into more detail, so maybe I can tell my mechanic to help speed the process. thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)