"The Monster" - 2008 Shelby GT500 **Update 4.0 Whipple and New Fuel System 2/14**

**Pro-Dyno** · 11-15-2011, 04:39 PM

Chuck Hicks 2008 Shelby GT500 is a BEAST; plain and simple. Anyone who has been down to the shop knows this car. There's a mile long list of things we have done to it, and we are not done yet! With a built motor, whipple, built rear, among others, Chuck's car currently puts down 915hp and 847tq! Follow along to see what we have been doing to this Shelby over the past few months!

Bone Stock w/ JLT CAI

Let the modding begin!

Header Install

Whipple Install

2.9 Whipple w/ 72lb Injectors

C&R Radiator

Custom Fan Switches

Suspension

Interior

2nd Round of Goodies!

Roll Cage Installation

Time to build the motor!

Rear End Build

Auto Transmission Swap

**UPDATES**

With the automatic trans in, Chuck's car ran a best of 6.43 @ 112mph with a 1.43 60'!

Congrats to Chuck and "The Monster" for making the February issue of CarCraft Magazine! You can find them on page 80!

Stay tuned for more updates on Chuck's GT500!

**Pro-Dyno** · 01-24-2012, 12:36 PM

We hope that you haven't forgotten about Chuck's 2008 GT500...aka "The Monster". It was like kids at Christmas here at the shop the other day when the new goodies arrived for Chuck, in the form of the new 4.0 Whipple Supercharger! Man this thing is huge and we can't wait to see what kind of power it can put down! Enough with the talking..here are some pictures of the blower and the test fit...numbers to come!!

Stay tuned!.....

**Pro-Dyno** · 02-14-2012, 01:14 PM

We're back with more updates on Chuck's 2008 GT500!

New Fuel System - Fore Triple Hat System and Aeromotive Pump with new lines

With the new fuel system installed and the lines ran, it was time to finish up the 4.0 Whipple installation. Check out the process below as we finished it up and topped her off with a True Fiber 3" cowl hood!

With all the new goodies installed...The Monster put down...

drum roll please......................

939HP and 886TQ through an Auto Trans!

Check out the video below of the dyno run!

http://ustre.am/:1nvzL

Thanks again Chuck for trusting Pro Dyno with your ride!

**Pro-Dyno** · 03-29-2012, 11:15 AM

11-15-2011, 04:39 PM	#1
Pro-Dyno Super Moderator Join Date: Dec 2004 Location: Fort Mill, SC Posts: 696	"The Monster" - 2008 Shelby GT500 Update 4.0 Whipple and New Fuel System 2/14 Chuck Hicks 2008 Shelby GT500 is a BEAST; plain and simple. Anyone who has been down to the shop knows this car. There's a mile long list of things we have done to it, and we are not done yet! With a built motor, whipple, built rear, among others, Chuck's car currently puts down 915hp and 847tq! Follow along to see what we have been doing to this Shelby over the past few months! Bone Stock w/ JLT CAI Let the modding begin! Header Install Whipple Install 2.9 Whipple w/ 72lb Injectors C&R Radiator Custom Fan Switches Suspension Interior 2nd Round of Goodies! Roll Cage Installation Time to build the motor! Rear End Build Auto Transmission Swap UPDATES With the automatic trans in, Chuck's car ran a best of 6.43 @ 112mph with a 1.43 60'! Congrats to Chuck and "The Monster" for making the February issue of CarCraft Magazine! You can find them on page 80! Stay tuned for more updates on Chuck's GT500! __________________

01-24-2012, 12:36 PM	#2
Pro-Dyno Super Moderator Join Date: Dec 2004 Location: Fort Mill, SC Posts: 696	We hope that you haven't forgotten about Chuck's 2008 GT500...aka "The Monster". It was like kids at Christmas here at the shop the other day when the new goodies arrived for Chuck, in the form of the new 4.0 Whipple Supercharger! Man this thing is huge and we can't wait to see what kind of power it can put down! Enough with the talking..here are some pictures of the blower and the test fit...numbers to come!! Stay tuned!..... __________________

02-14-2012, 01:14 PM	#3
Pro-Dyno Super Moderator Join Date: Dec 2004 Location: Fort Mill, SC Posts: 696	We're back with more updates on Chuck's 2008 GT500! New Fuel System - Fore Triple Hat System and Aeromotive Pump with new lines With the new fuel system installed and the lines ran, it was time to finish up the 4.0 Whipple installation. Check out the process below as we finished it up and topped her off with a True Fiber 3" cowl hood! With all the new goodies installed...The Monster put down... drum roll please...................... 939HP and 886TQ through an Auto Trans! Check out the video below of the dyno run! http://ustre.am/:1nvzL Thanks again Chuck for trusting Pro Dyno with your ride! __________________

03-29-2012, 11:15 AM	#4
Pro-Dyno Super Moderator Join Date: Dec 2004 Location: Fort Mill, SC Posts: 696	__________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)