Bilstein's

98Cobretti · 05-15-2002, 12:14 AM

I just ordered my Bilstein struts/shocks for the cobra today from of all places, Bimmerparts.com! They had the lowest price I could find after 3+ hours of searching the net.

V36-4138-H1 fronts
BE5-6418-H0 rears

all for $465.60 + 12.00 ups ground shipping

Anyone have the bilstein setups here? I see most people running Tokico's or coilovers....Just wanted to hear some impressions of the Bilsteins if you have them! I can't wait to get them and get rid of my sloppy worn out stockers. Thanks

**Cobra-R** · 05-15-2002, 08:44 AM

Quote:

Originally posted by 98Cobretti
I just ordered my Bilstein struts/shocks for the cobra today from of all places, Bimmerparts.com! They had the lowest price I could find after 3+ hours of searching the net.

V36-4138-H1 fronts
BE5-6418-H0 rears

all for $465.60 + 12.00 ups ground shipping

Anyone have the bilstein setups here? I see most people running Tokico's or coilovers....Just wanted to hear some impressions of the Bilsteins if you have them! I can't wait to get them and get rid of my sloppy worn out stockers. Thanks

Yep, I have them. Put them on my 01 along with H&R springs. Made a huge improvment in the handling of the car. You will be very satisfied.

svt_coupe · 05-15-2002, 09:04 AM

Yeah, they pretty much rock. I don't run them, but "everyone else" seems to. Nice choice.

98Cobretti · 05-15-2002, 07:07 PM

Well it turns out the rears have been on back order from Germany for 6 months, nobody has been able to get them. I'll get the struts in about 10 days, but the rears wont be until late June...I guess I have to wait a bit

ratman · 05-17-2002, 03:02 PM

Bilstein shocks/struts and HR springs only way to go--you will love it!! Bilsteins are on the 03 cobra--that should tell us something!

---ratman

scjmach1 · 05-18-2002, 07:03 PM

I installed them on my 98 Cobra. I noticed a big improvement in the ride quality in normal driving and they handle much better.

winddy1 · 06-06-2002, 10:38 AM

Tim installed the Bilsteins last night on our '99 ...

now, if it would just quit raining so we can test them out !!

Gingerman is this weekend !!

skankin · 06-07-2002, 11:35 AM

The BE5-6418-H0 rears are actually a twin-tube design. Since they're on backorder as well, you might consider the monotube, digressive-valved, short track shocks, especially if you're going to firmer springs.

They have hiem joints at both ends, but if you removed the top, and used some spacers on the bottom, they should swap right in. They're also machined & come with a snap ring, for easy coil-over conversion.

Check them out at:

http://www.stockcarproducts.com/bshocks.htm

I got mine from www.colemanracing.com , and got their shrink fit coil-over sleaves as well (had to have a machinist press them on though).

The Bilstein motorsport tech recommended the S7Z7030 (industry standard valving of 7-rebound, 3-compression) for 175# coil-overs.

The 5/3 valving would probably suffice for stock-like spring rates (200# conventional springs only have around a 100# wheel rate).
The larger monotube piston will move more fluid, and open the high-speed valve quicker, providing a smoother ride (while still having lot's of low-speed control for weight transfer).

I think the BE5's are around a 5/1.5, and are supposedly good for a 30% spring rate increase.

SIUNARA · 06-13-2002, 05:28 PM

I'm a little late with the reply here...but I too have Bilstein's...just upgraded to H&R race springs...VERY NICE combo...you'll be very happy!!

winddy1 · 06-13-2002, 06:11 PM

Quote:

Originally posted by SIUNARA
I'm a little late with the reply here...but I too have Bilstein's...just upgraded to H&R race springs...VERY NICE combo...you'll be very happy!!

===================

we had it on the track at Gingerman this weekend --
both of us driving both days and sharing the car ...

it did very well !! (99)

We're pleased !!

SIUNARA · 06-13-2002, 11:04 PM

Winddy1,

I saw your posts in the autox/road racing forum...sounds like you got the "bug" pretty bad after your trip to Gingerman!!!

I got the bug earlier this year...pretty bad myself...but boy is it fun adding parts to the car and looking forward to the next open track event!!

winddy1 · 06-14-2002, 08:36 AM

Quote:

Originally posted by SIUNARA
Winddy1,

I saw your posts in the autox/road racing forum...sounds like you got the "bug" pretty bad after your trip to Gingerman!!!

I got the bug earlier this year...pretty bad myself...but boy is it fun adding parts to the car and looking forward to the next open track event!!

====================

I love to drive !!

Hey -

one of my first words was

"car car" .......

I've had the bug for years and years -
I've just never really been able to get my nerve up at the track ...

I chickened out a few times.

Last year though, at Gingerman in October

(the rain/slow/cold day )

I drove my SVT Contour and had an excellant instructor .....

that really made a difference for me... I have a bit more confidence in myself now.

It sure is better driving a Cobra on the track though !!

skankin · 06-18-2002, 12:16 PM

$199 for 03 cobra shocks & struts:

http://www.fordpartsnetwork.com/03Cobra.htm

(either vert or coupe specs)

HECK of a deal!

98Cobretti · 06-25-2002, 09:58 PM

I finally received my bilsteins and installed them today. WOW what a difference. My friend has the bullitt tokicos, and there is a big difference between those and the bilsteins. The car is firm but so smooth at the same time. I am very impressed with them!! Highly recommended!

winddy1 · 06-26-2002, 11:01 AM

Quote:

Originally posted by 98Cobretti
I finally received my bilsteins and installed them today. WOW what a difference. My friend has the bullitt tokicos, and there is a big difference between those and the bilsteins. The car is firm but so smooth at the same time. I am very impressed with them!! Highly recommended!

===============

I agree ---

we had the Tokico's before..
they were just o.k.

We have the Koni's on the '98
Bilstein's on the '99...

the ride has improved 100% !!

05-15-2002, 12:14 AM	#1
98Cobretti Registered User Join Date: Oct 2001 Location: Rancho Santa Margarita, CA Posts: 80	Bilstein's I just ordered my Bilstein struts/shocks for the cobra today from of all places, Bimmerparts.com! They had the lowest price I could find after 3+ hours of searching the net. V36-4138-H1 fronts BE5-6418-H0 rears all for $465.60 + 12.00 ups ground shipping Anyone have the bilstein setups here? I see most people running Tokico's or coilovers....Just wanted to hear some impressions of the Bilsteins if you have them! I can't wait to get them and get rid of my sloppy worn out stockers. Thanks __________________ 1998 Cobra Coupe #4877 SCMC #557 Bassani X-pipe w cats Flowmaster 2 chambers WMS Velocity Tube Pro-m 87mm MAF K&N Bilstein Struts/shocks Eibach Pro Springs 18x9" Cobra R ('95)'s Nitto 555 265/35/18 Subframe Connectors Lakewood Traction-Action LCA's Steeda Tri-Ax 266 RWHP, 269 RWTQ 65 Mustang Coupe 302ci bored .030, trw forged pistons, comp cams 270h cam .501 lift .224 duration @.050, performer intake, holley 4bbl, re-worked heads, jacobs elec ignition, custom ram air setup, elec fan, hedman long tube headers, FMS 9mm plug wires, canton windage tray, 2.5" exhaust, 2 chamber flowmasters, 9" rear w 3.25 gears, FMS aluminum driveshaft, 4 wheel disc brakes, 17x8 TTII wheels, 4pt roll bar, simpson belts, auto c-4 trans, b&m quicksilver shifter, kyb shocks, 620lb springs, relocated control arms w negative wedge kit, 4 1/2 leaf rear springs, rear seat delete, subframe connectors, manual brakes/steering/no AC, shelby quicksteering kit, shelby gt350 R front valance, piaa lights, autometer guages, tcp pedals(still in progress) 225 RWHP , 260 RWTQ My Website http://members.cox.net/hk_sniper

05-15-2002, 09:04 AM	#3
svt_coupe Bryan Shugg Join Date: Jun 2001 Location: Charlotte, NC Posts: 817	Yeah, they pretty much rock. I don't run them, but "everyone else" seems to. Nice choice. __________________ Bryan Shugg #67 American Iron East

05-15-2002, 07:07 PM	#4
98Cobretti Registered User Join Date: Oct 2001 Location: Rancho Santa Margarita, CA Posts: 80	Well it turns out the rears have been on back order from Germany for 6 months, nobody has been able to get them. I'll get the struts in about 10 days, but the rears wont be until late June...I guess I have to wait a bit __________________ 1998 Cobra Coupe #4877 SCMC #557 Bassani X-pipe w cats Flowmaster 2 chambers WMS Velocity Tube Pro-m 87mm MAF K&N Bilstein Struts/shocks Eibach Pro Springs 18x9" Cobra R ('95)'s Nitto 555 265/35/18 Subframe Connectors Lakewood Traction-Action LCA's Steeda Tri-Ax 266 RWHP, 269 RWTQ 65 Mustang Coupe 302ci bored .030, trw forged pistons, comp cams 270h cam .501 lift .224 duration @.050, performer intake, holley 4bbl, re-worked heads, jacobs elec ignition, custom ram air setup, elec fan, hedman long tube headers, FMS 9mm plug wires, canton windage tray, 2.5" exhaust, 2 chamber flowmasters, 9" rear w 3.25 gears, FMS aluminum driveshaft, 4 wheel disc brakes, 17x8 TTII wheels, 4pt roll bar, simpson belts, auto c-4 trans, b&m quicksilver shifter, kyb shocks, 620lb springs, relocated control arms w negative wedge kit, 4 1/2 leaf rear springs, rear seat delete, subframe connectors, manual brakes/steering/no AC, shelby quicksteering kit, shelby gt350 R front valance, piaa lights, autometer guages, tcp pedals(still in progress) 225 RWHP , 260 RWTQ My Website http://members.cox.net/hk_sniper

05-17-2002, 03:02 PM	#5
ratman Registered User Join Date: May 2002 Location: tallapoosa, georgia Posts: 8	Bilstein shocks/struts and HR springs only way to go--you will love it!! Bilsteins are on the 03 cobra--that should tell us something! ---ratman __________________ 2001 silver metallic COBRA, build number 419, DOB 4-10-2001 DEARBORN, MICHIGAN. EVERY AVAILABLE FACTORY OPTION. C&L MAF, Autologic custom chip burned by Higgins Performance Ford, LAST DYNO NUMBERS (HIGGINS, DOUGLASVILLE, GA) 291.6 RWHP and 293.0 RWTQ, Cobra R rear wheels with Firestone SZEP 275 x 40 x17, Bilstein shocks and struts, HR springs, FRPP 4.10 gears, Basani X pipe with high flow cats, Flowmaster mufflers, Shorty Antenna, KN cold air intake,Steeda TRI Ax shifter with FAT knob, Valentine A pillar mount, Bearcat scanner with auto trooper alert, Filter Mag #275, FRPP Racing steering wheel, Steeda billet door pins,Steeda pedals, Steeda billet cig lighter, Steeda billet HVAC controls, Steeda billet headlight knob, MGW locking fuel door, MGW billet oil filler cap, MGW billet license plate frame, Autometer monster tach dash mount, Winger SS build numbers trunk lid, Winger SS cobra lettering bumper mounting, Mobil 1 oil filter, Amosil 0-30 series 2000 oil, she lives in seperat , detached garage-- climate controlled--no cats allowed! Loosing weight has the same effect as gaining HP and is usually a whole lot cheaper!!! Former C5 owner--ugh!!

05-18-2002, 07:03 PM	#6
scjmach1 Registered User Join Date: Jul 2001 Location: Warren, MI Posts: 15	I installed them on my 98 Cobra. I noticed a big improvement in the ride quality in normal driving and they handle much better. __________________ 1998 Laser Red Cobra 4.10's, T-56, TA/PHB

06-06-2002, 10:38 AM	#7
winddy1 Registered User Join Date: Jun 2001 Posts: 4,793	Re: Bilstein's Tim installed the Bilsteins last night on our '99 ... now, if it would just quit raining so we can test them out !! Gingerman is this weekend !! __________________ Car Trailer is SOLD...

06-07-2002, 11:35 AM	#8
skankin Registered User Join Date: May 2002 Location: London, Ontario, Canada Posts: 4	The BE5-6418-H0 rears are actually a twin-tube design. Since they're on backorder as well, you might consider the monotube, digressive-valved, short track shocks, especially if you're going to firmer springs. They have hiem joints at both ends, but if you removed the top, and used some spacers on the bottom, they should swap right in. They're also machined & come with a snap ring, for easy coil-over conversion. Check them out at: http://www.stockcarproducts.com/bshocks.htm I got mine from www.colemanracing.com , and got their shrink fit coil-over sleaves as well (had to have a machinist press them on though). The Bilstein motorsport tech recommended the S7Z7030 (industry standard valving of 7-rebound, 3-compression) for 175# coil-overs. The 5/3 valving would probably suffice for stock-like spring rates (200# conventional springs only have around a 100# wheel rate). The larger monotube piston will move more fluid, and open the high-speed valve quicker, providing a smoother ride (while still having lot's of low-speed control for weight transfer). I think the BE5's are around a 5/1.5, and are supposedly good for a 30% spring rate increase. __________________ 89.5 stang.

06-13-2002, 05:28 PM	#9
SIUNARA Registered User Join Date: Mar 2002 Location: State College, Pa. Posts: 374	I'm a little late with the reply here...but I too have Bilstein's...just upgraded to H&R race springs...VERY NICE combo...you'll be very happy!! __________________ Don Page 95 Cobra

06-13-2002, 11:04 PM	#11
SIUNARA Registered User Join Date: Mar 2002 Location: State College, Pa. Posts: 374	Winddy1, I saw your posts in the autox/road racing forum...sounds like you got the "bug" pretty bad after your trip to Gingerman!!! I got the bug earlier this year...pretty bad myself...but boy is it fun adding parts to the car and looking forward to the next open track event!! __________________ Don Page 95 Cobra

06-18-2002, 12:16 PM	#13
skankin Registered User Join Date: May 2002 Location: London, Ontario, Canada Posts: 4	$199 for 03 cobra shocks & struts: http://www.fordpartsnetwork.com/03Cobra.htm (either vert or coupe specs) HECK of a deal! __________________ 89.5 stang.

06-25-2002, 09:58 PM	#14
98Cobretti Registered User Join Date: Oct 2001 Location: Rancho Santa Margarita, CA Posts: 80	I finally received my bilsteins and installed them today. WOW what a difference. My friend has the bullitt tokicos, and there is a big difference between those and the bilsteins. The car is firm but so smooth at the same time. I am very impressed with them!! Highly recommended! __________________ 1998 Cobra Coupe #4877 SCMC #557 Bassani X-pipe w cats Flowmaster 2 chambers WMS Velocity Tube Pro-m 87mm MAF K&N Bilstein Struts/shocks Eibach Pro Springs 18x9" Cobra R ('95)'s Nitto 555 265/35/18 Subframe Connectors Lakewood Traction-Action LCA's Steeda Tri-Ax 266 RWHP, 269 RWTQ 65 Mustang Coupe 302ci bored .030, trw forged pistons, comp cams 270h cam .501 lift .224 duration @.050, performer intake, holley 4bbl, re-worked heads, jacobs elec ignition, custom ram air setup, elec fan, hedman long tube headers, FMS 9mm plug wires, canton windage tray, 2.5" exhaust, 2 chamber flowmasters, 9" rear w 3.25 gears, FMS aluminum driveshaft, 4 wheel disc brakes, 17x8 TTII wheels, 4pt roll bar, simpson belts, auto c-4 trans, b&m quicksilver shifter, kyb shocks, 620lb springs, relocated control arms w negative wedge kit, 4 1/2 leaf rear springs, rear seat delete, subframe connectors, manual brakes/steering/no AC, shelby quicksteering kit, shelby gt350 R front valance, piaa lights, autometer guages, tcp pedals(still in progress) 225 RWHP , 260 RWTQ My Website http://members.cox.net/hk_sniper

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search