Just built me a website for the cobra!

98Cobretti · 12-12-2002, 12:29 AM

Check out the new site, let me know what you guys think. thanks
www.members.cox.net/hk_sniper

JBejarano · 12-12-2002, 01:08 AM

like the setup

Nice page you got there

STU · 12-12-2002, 08:57 AM

Looks Great!

**Mystic_Cobra** · 12-12-2002, 10:55 AM

good looking site, good looking car.

A couple questions for you.
1. Did you really get a 87 mm Pro M mass air meter? Most 96-98 Cobras have either the 77 mm or the 80 mm.
2. Are the rear Cobra rims really 18X9 and not 17X9? They look the same from here. They look good, but hard to tell. Looks like you could still use the H&R spacers to get the rims out closer to the fender well. I'm getting them soon.
3. Are you planning to get two more rims?

Jimmy Bost

98Cobretti · 12-12-2002, 07:03 PM

Yes its a 87mm Pro-m, it came with my wms setup, you can buy the whole thing through them. The wheels are 18x9 in the rear, I am going to buy 2 more very soon. My tires were bald slicks in the rear and I didn't have enough money at the time to buy 4 wheels and tires, so I bought the rears. I know the company I bought them from has 18x10.5 in the works right now, but it might be a while until they come out, so Ill probably end up getting another two 18x9's, then upgrade later when the 18x10.5's come out. They are Dante wheels, I bought them through Discount Tire Direct. thanks guys

fastoldman · 12-14-2002, 06:54 PM

Nice photos and interesting mods. The car looks great and you obviously put alot of thought into this.Nice job!

Poisoned Pony · 12-15-2002, 10:24 PM

looks good, like the studio shots. you going to knotts berry farm show in april?

98Cobretti · 12-16-2002, 01:47 AM

Thanks, I probably will go to the Knott's show in April, I haven't been in about 2 years...see you there?

Poisoned Pony · 12-16-2002, 05:18 AM

Quote:

Originally posted by 98Cobretti
Thanks, I probably will go to the Knott's show in April, I haven't been in about 2 years...see you there?

yup, I already have hotel reservations at the Radisson

caravaning down on the friday before. This will be my 3rd year attending

12-12-2002, 12:29 AM	#1
98Cobretti Registered User Join Date: Oct 2001 Location: Rancho Santa Margarita, CA Posts: 80	Just built me a website for the cobra! Check out the new site, let me know what you guys think. thanks www.members.cox.net/hk_sniper __________________ 1998 Cobra Coupe #4877 SCMC #557 Bassani X-pipe w cats Flowmaster 2 chambers WMS Velocity Tube Pro-m 87mm MAF K&N Bilstein Struts/shocks Eibach Pro Springs 18x9" Cobra R ('95)'s Nitto 555 265/35/18 Subframe Connectors Lakewood Traction-Action LCA's Steeda Tri-Ax 266 RWHP, 269 RWTQ 65 Mustang Coupe 302ci bored .030, trw forged pistons, comp cams 270h cam .501 lift .224 duration @.050, performer intake, holley 4bbl, re-worked heads, jacobs elec ignition, custom ram air setup, elec fan, hedman long tube headers, FMS 9mm plug wires, canton windage tray, 2.5" exhaust, 2 chamber flowmasters, 9" rear w 3.25 gears, FMS aluminum driveshaft, 4 wheel disc brakes, 17x8 TTII wheels, 4pt roll bar, simpson belts, auto c-4 trans, b&m quicksilver shifter, kyb shocks, 620lb springs, relocated control arms w negative wedge kit, 4 1/2 leaf rear springs, rear seat delete, subframe connectors, manual brakes/steering/no AC, shelby quicksteering kit, shelby gt350 R front valance, piaa lights, autometer guages, tcp pedals(still in progress) 225 RWHP , 260 RWTQ My Website http://members.cox.net/hk_sniper

12-12-2002, 01:08 AM	#2
JBejarano Registered User Join Date: Jun 2002 Location: Magnolia,TX Posts: 200	like the setup Nice page you got there __________________ White 1999 Coupe #1594 FRPP headers, Dr Gas Catted X, magnapack, Steeda U/D's, Pro-M 95mm,WMS upper velocity tub,and a few things to make it look nice As of 4/19/04 309.2rwhp 300.8rwtq

12-12-2002, 10:55 AM	#4
Mystic_Cobra NASA American Iron #16 Join Date: Oct 2001 Location: Northern VA Posts: 608	good looking site, good looking car. A couple questions for you. 1. Did you really get a 87 mm Pro M mass air meter? Most 96-98 Cobras have either the 77 mm or the 80 mm. 2. Are the rear Cobra rims really 18X9 and not 17X9? They look the same from here. They look good, but hard to tell. Looks like you could still use the H&R spacers to get the rims out closer to the fender well. I'm getting them soon. 3. Are you planning to get two more rims? Jimmy Bost __________________ Jimmy Bost #00539 '17 Ruby Red GT350 #H6022 \| '65 Mustang hardtop

12-12-2002, 07:03 PM	#5
98Cobretti Registered User Join Date: Oct 2001 Location: Rancho Santa Margarita, CA Posts: 80	Yes its a 87mm Pro-m, it came with my wms setup, you can buy the whole thing through them. The wheels are 18x9 in the rear, I am going to buy 2 more very soon. My tires were bald slicks in the rear and I didn't have enough money at the time to buy 4 wheels and tires, so I bought the rears. I know the company I bought them from has 18x10.5 in the works right now, but it might be a while until they come out, so Ill probably end up getting another two 18x9's, then upgrade later when the 18x10.5's come out. They are Dante wheels, I bought them through Discount Tire Direct. thanks guys __________________ 1998 Cobra Coupe #4877 SCMC #557 Bassani X-pipe w cats Flowmaster 2 chambers WMS Velocity Tube Pro-m 87mm MAF K&N Bilstein Struts/shocks Eibach Pro Springs 18x9" Cobra R ('95)'s Nitto 555 265/35/18 Subframe Connectors Lakewood Traction-Action LCA's Steeda Tri-Ax 266 RWHP, 269 RWTQ 65 Mustang Coupe 302ci bored .030, trw forged pistons, comp cams 270h cam .501 lift .224 duration @.050, performer intake, holley 4bbl, re-worked heads, jacobs elec ignition, custom ram air setup, elec fan, hedman long tube headers, FMS 9mm plug wires, canton windage tray, 2.5" exhaust, 2 chamber flowmasters, 9" rear w 3.25 gears, FMS aluminum driveshaft, 4 wheel disc brakes, 17x8 TTII wheels, 4pt roll bar, simpson belts, auto c-4 trans, b&m quicksilver shifter, kyb shocks, 620lb springs, relocated control arms w negative wedge kit, 4 1/2 leaf rear springs, rear seat delete, subframe connectors, manual brakes/steering/no AC, shelby quicksteering kit, shelby gt350 R front valance, piaa lights, autometer guages, tcp pedals(still in progress) 225 RWHP , 260 RWTQ My Website http://members.cox.net/hk_sniper

12-15-2002, 10:24 PM	#7
Poisoned Pony Registered User Join Date: Jul 2001 Location: Sacramento, CA Posts: 147	looks good, like the studio shots. you going to knotts berry farm show in april? __________________ '96 Cobra #3427 of 7496 Crystal White w/ Tan interior Mods: 3.73's, Bassani catback, Steeda Sports, Tokico Illumina's, J&M LCA's, SSR rims Previous rides: '00 GT, '03 Mach 1, '96 Cobra #7427, '89 GT, '92 GT

12-12-2002, 08:57 AM	#3
STU Registered User Join Date: Jun 2001 Posts: 713	Looks Great!

12-14-2002, 06:54 PM	#6
fastoldman Registered User Join Date: Oct 2002 Posts: 30	Nice photos and interesting mods. The car looks great and you obviously put alot of thought into this.Nice job!

12-16-2002, 01:47 AM	#8
98Cobretti Registered User Join Date: Oct 2001 Location: Rancho Santa Margarita, CA Posts: 80	Thanks, I probably will go to the Knott's show in April, I haven't been in about 2 years...see you there? __________________ 1998 Cobra Coupe #4877 SCMC #557 Bassani X-pipe w cats Flowmaster 2 chambers WMS Velocity Tube Pro-m 87mm MAF K&N Bilstein Struts/shocks Eibach Pro Springs 18x9" Cobra R ('95)'s Nitto 555 265/35/18 Subframe Connectors Lakewood Traction-Action LCA's Steeda Tri-Ax 266 RWHP, 269 RWTQ 65 Mustang Coupe 302ci bored .030, trw forged pistons, comp cams 270h cam .501 lift .224 duration @.050, performer intake, holley 4bbl, re-worked heads, jacobs elec ignition, custom ram air setup, elec fan, hedman long tube headers, FMS 9mm plug wires, canton windage tray, 2.5" exhaust, 2 chamber flowmasters, 9" rear w 3.25 gears, FMS aluminum driveshaft, 4 wheel disc brakes, 17x8 TTII wheels, 4pt roll bar, simpson belts, auto c-4 trans, b&m quicksilver shifter, kyb shocks, 620lb springs, relocated control arms w negative wedge kit, 4 1/2 leaf rear springs, rear seat delete, subframe connectors, manual brakes/steering/no AC, shelby quicksteering kit, shelby gt350 R front valance, piaa lights, autometer guages, tcp pedals(still in progress) 225 RWHP , 260 RWTQ My Website http://members.cox.net/hk_sniper

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search