brakes

flynfink · 01-04-2003, 09:51 AM

OK, I know that we've beaten it to death. For street and occasional track, the Perfomance Friction Z's are a good choice for the front of my 99'.

What about the rears?

Also, autozone lists the Z's for 97-98 but not the 99's.

Gotta get ready for some hot laps at CMP.

Oh, one other ? Tire pressures? 255/45-17 SZ50's on stock rims? Good starting point? Autocross, I ran about 40 psi or so.

johnbasf · 01-04-2003, 10:29 AM

Quote:

Originally posted by flynfink
OK, I know that we've beaten it to death. For street and occasional track, the Perfomance Friction Z's are a good choice for the front of my 99'.

What about the rears?

Also, autozone lists the Z's for 97-98 but not the 99's.

Gotta get ready for some hot laps at CMP.

Oh, one other ? Tire pressures? 255/45-17 SZ50's on stock rims? Good starting point? Autocross, I ran about 40 psi or so.

The Hawk HPS should be good for the rear if you are going with the Z pads. $0 PSI is a good start for tire pressures. It would be a good idea to bring and extra set of front and rear pads.

SIUNARA · 01-04-2003, 01:56 PM

I agree with John, HPS for the rear. If you run those in the rear and the PF-Z pads in the front you should be good to go.

flynfink · 01-25-2003, 06:40 PM

Quote:

Originally posted by johnbasf
The Hawk HPS should be good for the rear if you are going with the Z pads. $0 PSI is a good start for tire pressures. It would be a good idea to bring and extra set of front and rear pads.

Hey John, gotta good source for the hawk pads?

johnbasf · 01-25-2003, 09:41 PM

Maximum Motorsports is where I get mine.

flynfink · 01-26-2003, 11:27 AM

Hey John,
Would the HPS's for the front be better than the PF-Z's? Also, does MM give us a discount?

poolman · 01-26-2003, 12:23 PM

Quote:

Originally posted by flynfink
Hey John,
Would the HPS's for the front be better than the PF-Z's? Also, does MM give us a discount?

Jeff

I ate some rotors on track with HPS on the front, PF-Z on the front would be better.

Dennis

SIUNARA · 01-26-2003, 05:56 PM

PF-Z's- $70 at Autozone with a lifetime warranty...you smoke them, they give you a new set for free no questions asked...

Hawk HPS- $90 and when you smoke them, you have to pay another $90 for a new set.

They are a similar pad but for the money alone, you can't beat the PF-Z. In my experience they aren't too bad on rotors.

svt_coupe · 01-27-2003, 06:24 PM

Jeff - did you ever get my PM about the brakes?

EDIT - I guess I should have checked my own PM's!!!

LOL!! (just read your responses...)

johnbasf · 01-27-2003, 07:19 PM

Quote:

Originally posted by svt_coupe
Jeff - did you ever get my PM about the brakes?

EDIT - I guess I should have checked my own PM's!!! LOL!! (just read your responses...)

DOLT!!!!

svt_coupe · 01-29-2003, 12:39 PM

Quote:

DOLT!!!!

Big Daddy · 01-29-2003, 12:52 PM

Just my .02 worth...I'm going to be running a new compound from Carbotech on the fronts and the XP on the back at CMP. I thought several of the AI guys ran Carbotech's pads???

SIUNARA · 01-30-2003, 06:08 PM

Cobalt is the new AI series sponser. I just purchased some pads and rotors from them, and they were GREAT to deal with!!! Might wanna check them out too!!

flynfink · 01-30-2003, 07:04 PM

did, got them on the way Axxis Ultimates for the front and Hawk HPS for the rear. They were great to work w/ and even gave me a discount

flynfink · 02-23-2003, 10:48 PM

Quote:

Originally posted by flynfink
did, got them on the way Axxis Ultimates for the front and Hawk HPS for the rear. They were great to work w/ and even gave me a discount

They're in along w/ clean fluid and new goodridge SS front lines (thanks PPI). Thanks to Tony, and Ed B. for the help...and Tom G. for the advise on the brake pins.

01-04-2003, 09:51 AM	#1
flynfink Registered User Join Date: Jun 2001 Location: Concord, NC Posts: 1,002	brakes OK, I know that we've beaten it to death. For street and occasional track, the Perfomance Friction Z's are a good choice for the front of my 99'. What about the rears? Also, autozone lists the Z's for 97-98 but not the 99's. Gotta get ready for some hot laps at CMP. Oh, one other ? Tire pressures? 255/45-17 SZ50's on stock rims? Good starting point? Autocross, I ran about 40 psi or so. __________________ Jeff F. AKA FlynFink 07' Porscha Cayman S 99' Rio Red Cobra Vert. #203 of 4055 94' Black Cobra Coupe #4971 of 5009 "Drive it like ya stole it"

01-04-2003, 01:56 PM	#3
SIUNARA Registered User Join Date: Mar 2002 Location: State College, Pa. Posts: 374	I agree with John, HPS for the rear. If you run those in the rear and the PF-Z pads in the front you should be good to go. __________________ Don Page 95 Cobra

01-25-2003, 09:41 PM	#5
johnbasf Registered User Join Date: Jun 2001 Location: Lewisville,NC Posts: 2,674	Maximum Motorsports is where I get mine. __________________ John Pearson

01-26-2003, 11:27 AM	#6
flynfink Registered User Join Date: Jun 2001 Location: Concord, NC Posts: 1,002	Hey John, Would the HPS's for the front be better than the PF-Z's? Also, does MM give us a discount? __________________ Jeff F. AKA FlynFink 07' Porscha Cayman S 99' Rio Red Cobra Vert. #203 of 4055 94' Black Cobra Coupe #4971 of 5009 "Drive it like ya stole it"

01-26-2003, 05:56 PM	#8
SIUNARA Registered User Join Date: Mar 2002 Location: State College, Pa. Posts: 374	PF-Z's- $70 at Autozone with a lifetime warranty...you smoke them, they give you a new set for free no questions asked... Hawk HPS- $90 and when you smoke them, you have to pay another $90 for a new set. They are a similar pad but for the money alone, you can't beat the PF-Z. In my experience they aren't too bad on rotors. __________________ Don Page 95 Cobra

01-27-2003, 06:24 PM	#9
svt_coupe Bryan Shugg Join Date: Jun 2001 Location: Charlotte, NC Posts: 817	Jeff - did you ever get my PM about the brakes? EDIT - I guess I should have checked my own PM's!!! LOL!! (just read your responses...) __________________ Bryan Shugg #67 American Iron East

01-29-2003, 12:52 PM	#12
Big Daddy Registered User Join Date: Dec 2001 Location: Asheville, NC Posts: 4,885	Just my .02 worth...I'm going to be running a new compound from Carbotech on the fronts and the XP on the back at CMP. I thought several of the AI guys ran Carbotech's pads??? __________________ 2008 Shelby GT500 White w/Blue Stripes STOCK AND STAYING THAT WAY! Kenny Brown '01 Cobra S Serial # 01-047C True Blue Performance Forged Short Block FR500 Heads & Cams, Fluidyne Radiator McLeod Clutch and aluminum flywheel Aluminum Driveshaft, UPR adjustable clutch cable GT40 Fuel Tank & pumps, Kenne Bell Boost-a-Pump, 60lb injectors, Vortech T-Trim W/After Cooler, 2.9" RR Pulley Anderson Power Pipe, Accufab Throttle Body (USELESS IMHO), MGW Shifter with the blue handle KB Oil Cooling system, KB Differential Cooler Autometer Phantom boost and fuel pressure guages Kenny Brown Aero Kit, Kooks LT Headers H-Pipe with H-flow cats, Bassani Cat Back Snow Boost Cooler T56 Six Speed Tranny MGW BLING-BLING interior stuff 645RWHP and 558RWTQ

01-30-2003, 06:08 PM	#13
SIUNARA Registered User Join Date: Mar 2002 Location: State College, Pa. Posts: 374	Cobalt is the new AI series sponser. I just purchased some pads and rotors from them, and they were GREAT to deal with!!! Might wanna check them out too!! __________________ Don Page 95 Cobra

01-30-2003, 07:04 PM	#14
flynfink Registered User Join Date: Jun 2001 Location: Concord, NC Posts: 1,002	did, got them on the way Axxis Ultimates for the front and Hawk HPS for the rear. They were great to work w/ and even gave me a discount __________________ Jeff F. AKA FlynFink 07' Porscha Cayman S 99' Rio Red Cobra Vert. #203 of 4055 94' Black Cobra Coupe #4971 of 5009 "Drive it like ya stole it"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search