381 R Saleen Wing [3 Reply Pics]

ONEJETI · 01-21-2003, 05:35 PM

TWO BOLTS HOLDS THE WING ON AND ALOT OF TWO SIDED TAPE...I MADE TWO STUDS UP AND COVERED THE TIPS WITH MASKING TAPE TO KEEP FROM SCRATCHING THE TRUNK AND TO USE THEM AS GUIDES TO GET THE SPOILER IN PLACE..ONCE IT WAS IN PLACE I USED THE STUDS AND NUTS SALEEN SUPPLIED..

ONEJETI · 01-21-2003, 05:39 PM

DRILL HOLE ... FEED WIRE THREW BUT DONT TRIM IT...MAKES IS EASY TO FEED WHEN YOU SET SPOILER IN PLACE

ONEJETI · 01-21-2003, 05:44 PM

MADE LONG STUDS UP ABOUT 2 1/2 INCHES MADE ALIGNMENT EASY ..TOW SIDED BODY SIDE MOLDING TAPE[[[3 M]]]

ONEJETI · 01-21-2003, 05:52 PM

NOTICE THE LITTLE LOGO ON THE TRUNK FROM THE DEALER...ALMOST BACKED OUT OF THE DEAL BECAUSE OF IT..WONT B THERE WHEN THE CAR HITS THE ROAD THIS SPRING,GUESS I SHOULDNT COMPLAIN THEY DID GIVE ME A GOOD DEAL

Venimuz · 01-22-2003, 02:06 AM

Have you driven it yet, and if so, noticed any extra end-holding strength from the wing?

ONEJETI · 01-22-2003, 01:06 PM

I DROVE IT HOME FROM THE DEALER CHRISTMAS EVE 26 MILES..AND NEVER HAD A CHANCE TO SEE REALLY WHAT THE CAR COULD DO STOCK...I ADDED THE WING AND IN THE PROCESS OF ADDING A MACH 1 CHIN SPOILER MODIFIED AIR BOX,KN FILTER ,CHANGED TO 6 LB PULLY,DIABLO CHIP AND BORLA CAT BACK EXHAUST..ILL B THE WORSE PERSON TO ASK HOW IT COMPARES TO STOCK...BUT I HAD A GTS AND A Z06 SO I KNOW WHAT IT WILL TAKE TO DO BATTLE WITH THEM.SO I AM GOING TO HAVE TO CUT WIEGHT SOME PLACE..SPARE ,TIRE JACK,EXHAUST IS LIGHTER SOME WHAT ,WASHER RES, REAR SEAT DELETE.

01-21-2003, 05:35 PM	#1
ONEJETI Registered User Join Date: Dec 2002 Location: OHIO Posts: 41	381 R Saleen Wing [3 Reply Pics] TWO BOLTS HOLDS THE WING ON AND ALOT OF TWO SIDED TAPE...I MADE TWO STUDS UP AND COVERED THE TIPS WITH MASKING TAPE TO KEEP FROM SCRATCHING THE TRUNK AND TO USE THEM AS GUIDES TO GET THE SPOILER IN PLACE..ONCE IT WAS IN PLACE I USED THE STUDS AND NUTS SALEEN SUPPLIED.. Attached Images

01-21-2003, 05:39 PM	#2
ONEJETI Registered User Join Date: Dec 2002 Location: OHIO Posts: 41	LIGHT DRILL HOLE ... FEED WIRE THREW BUT DONT TRIM IT...MAKES IS EASY TO FEED WHEN YOU SET SPOILER IN PLACE Attached Images

01-21-2003, 05:44 PM	#3
ONEJETI Registered User Join Date: Dec 2002 Location: OHIO Posts: 41	STUD AND TAPE MADE LONG STUDS UP ABOUT 2 1/2 INCHES MADE ALIGNMENT EASY ..TOW SIDED BODY SIDE MOLDING TAPE[[[3 M]]] Attached Images

01-21-2003, 05:52 PM	#4
ONEJETI Registered User Join Date: Dec 2002 Location: OHIO Posts: 41	REAR NOTICE THE LITTLE LOGO ON THE TRUNK FROM THE DEALER...ALMOST BACKED OUT OF THE DEAL BECAUSE OF IT..WONT B THERE WHEN THE CAR HITS THE ROAD THIS SPRING,GUESS I SHOULDNT COMPLAIN THEY DID GIVE ME A GOOD DEAL Attached Images

01-22-2003, 01:06 PM	#6
ONEJETI Registered User Join Date: Dec 2002 Location: OHIO Posts: 41	WING I DROVE IT HOME FROM THE DEALER CHRISTMAS EVE 26 MILES..AND NEVER HAD A CHANCE TO SEE REALLY WHAT THE CAR COULD DO STOCK...I ADDED THE WING AND IN THE PROCESS OF ADDING A MACH 1 CHIN SPOILER MODIFIED AIR BOX,KN FILTER ,CHANGED TO 6 LB PULLY,DIABLO CHIP AND BORLA CAT BACK EXHAUST..ILL B THE WORSE PERSON TO ASK HOW IT COMPARES TO STOCK...BUT I HAD A GTS AND A Z06 SO I KNOW WHAT IT WILL TAKE TO DO BATTLE WITH THEM.SO I AM GOING TO HAVE TO CUT WIEGHT SOME PLACE..SPARE ,TIRE JACK,EXHAUST IS LIGHTER SOME WHAT ,WASHER RES, REAR SEAT DELETE.

01-22-2003, 02:06 AM	#5
Venimuz Registered User Join Date: Sep 2002 Location: Florence, SC Posts: 21	Have you driven it yet, and if so, noticed any extra end-holding strength from the wing?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search