Vortech Idler Pulley

smashedheadcat · 05-14-2003, 11:01 AM

It happened again. The bearing went out for the Vortech Idler pulley. Something's not right. I'm not sure what, but it keeps going out after a few thousand miles. I'm using that "Air Conditioning" tab as instructed in the installation guide. This second time around, it was installed by True Blue Performance.

smashedheadcat · 05-14-2003, 11:03 AM

Another

smashedheadcat · 05-14-2003, 11:04 AM

anudder

Ken 01-Cobra · 05-14-2003, 01:16 PM

Have you talked with Vortech about this??? Sounds like they have a problem with the pulley or with the instructions!

tcrews · 05-14-2003, 01:56 PM

Talk to Vortech, I believe there is a redesigned pulley but it also requires a new mounting bracket.

smashedheadcat · 05-14-2003, 07:50 PM

Quote:

Originally posted by Ken 01-Cobra
Have you talked with Vortech about this??? Sounds like they have a problem with the pulley or with the instructions!

I called the earlier today, and they were very "unhelpful". They said the "old" pulley setup was prone to failure, but this new one is a "flawless" design.

smashedheadcat · 05-14-2003, 07:55 PM

Quote:

Originally posted by tcrews
Talk to Vortech, I believe there is a redesigned pulley but it also requires a new mounting bracket.

Yeah, I talked to them today, and ended up ordering the exact same thing that I've got already. They say it's a flawless design, but they sell the "Idler pulley shat itself repair package" for $108. So it's not that expensive, but still a PITA. It's left me stranded on the side of the road twice now. I'm going to put a very thin washer in between the front cover plate and the mounting bracket. I'll try it and see what happens. Tom, I got that new pulley, and it came with the new mounting bracket. It still went bad. I'll post a few pics when I take off that bracket. I've still got the blower on, just removed that idler, and used a stock belt, the vortech is completely bypassed beltwise.

Ken 01-Cobra · 05-14-2003, 10:32 PM

Quote:

Originally posted by smashedheadcat
I called the earlier today, and they were very "unhelpful". They said the "old" pulley setup was prone to failure, but this new one is a "flawless" design.

Send them a link to the pictures here and ask them to explain how these are "flawless"! For the SECOND time! *I* certainly would!

redsnake99 · 05-15-2003, 10:11 AM

Mine had to be replaced recently, too.

smashedheadcat · 05-15-2003, 04:37 PM

Quote:

Originally posted by Ken 01-Cobra
Send them a link to the pictures here and ask them to explain how these are "flawless"! For the SECOND time! *I* certainly would!

May have to do that one.

smashedheadcat · 05-15-2003, 10:36 PM

Well, I got my new pulley and bracket, but I'm still disappointed in my vortech service expiriences. I specifically told them that I needed the stud that goes into the block (the s/c bracket slides over it) because it was damaged. They said that that piece is included in the "Flawless" generation 2 kit. I told them that I ordered this kit a few months ago, and it did not come with it. I specifically told them i NEED this stud, and sure enough, it didn't come. The only good thing to I have to say about Vortech's service department is that it's fast. They didn't do much for me as far as advice, or standing by this "pulley kit", but they sure got me most of the parts I needed in 1 day. I still need to find a new belt, and probably a stud from Lowe's or something.

Ken 01-Cobra · 05-16-2003, 01:39 AM

Quote:

Originally posted by smashedheadcat
Well, I got my new pulley and bracket, but I'm still disappointed in my vortech service expiriences.
-snip-
I still need to find a new belt, and probably a stud from Lowe's or something.

Sounds like perhaps Vortech is getting to big to be of use anymore. I think I will just wait and do the turbo thing.

05-14-2003, 11:01 AM	#1
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	Vortech Idler Pulley It happened again. The bearing went out for the Vortech Idler pulley. Something's not right. I'm not sure what, but it keeps going out after a few thousand miles. I'm using that "Air Conditioning" tab as instructed in the installation guide. This second time around, it was installed by True Blue Performance. Attached Images __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

05-14-2003, 11:03 AM	#2
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	Another Attached Images __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

05-14-2003, 11:04 AM	#3
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	anudder Attached Images __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

05-14-2003, 01:16 PM	#4
Ken 01-Cobra Registered User Join Date: Jan 2002 Location: Atlanta Posts: 764	Have you talked with Vortech about this??? Sounds like they have a problem with the pulley or with the instructions! __________________ Ken's Home Page <-- Click to visit!

05-14-2003, 01:56 PM	#5
tcrews Moderator Join Date: Jun 2001 Location: Lexington, SC Posts: 878	Talk to Vortech, I believe there is a redesigned pulley but it also requires a new mounting bracket. __________________ Tom Crews 1997 Cobra Coupe #3672, SCMC #82 571 rwHP 462 rwTQ ------- 1998 Cobra Convertible 264 rwHP 268 rwTQ Tom's SVT Cobra Page

05-15-2003, 10:11 AM	#9
redsnake99 SCMC Member Join Date: Jun 2001 Location: NV, NY, SC Posts: 1,241	Mine had to be replaced recently, too. __________________ Dave Stanfield - SCMC 424

05-15-2003, 10:36 PM	#11
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	Well, I got my new pulley and bracket, but I'm still disappointed in my vortech service expiriences. I specifically told them that I needed the stud that goes into the block (the s/c bracket slides over it) because it was damaged. They said that that piece is included in the "Flawless" generation 2 kit. I told them that I ordered this kit a few months ago, and it did not come with it. I specifically told them i NEED this stud, and sure enough, it didn't come. The only good thing to I have to say about Vortech's service department is that it's fast. They didn't do much for me as far as advice, or standing by this "pulley kit", but they sure got me most of the parts I needed in 1 day. I still need to find a new belt, and probably a stud from Lowe's or something. __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search