Anyone close to GA want to help me out???

White98SVT · 05-22-2003, 01:15 PM

Well I decided to go all out and try and get some BBK LT's as soon as I can. The thing is, I've never done this before. So I thought I'd put out a feeler to see if anyone close to GA that has done this could and would lend a helping hand. Within a reasonable distance I would be very willing to drive to you so you're not out. Plus supply some beer, food to cook out etc.

Don't feel obligated, just wanted to see.

Thanks.

PS--Right now I'm actually in SE GA near Savannah at school so I'm pretty close to most of the SE, at least the coastal areas.

smashedheadcat · 05-23-2003, 03:51 AM

I would do the whole swap for ya, but I'm up here in Eastern North Carolina.

I'll always turn wrenches for beer.

White98SVT · 05-23-2003, 02:27 PM

Quote:

Originally posted by smashedheadcat
I would do the whole swap for ya, but I'm up here in Eastern North Carolina. I'll always turn wrenches for beer.

Eastern NC isn't that far. I'm only like 1 hour from Hilton Head, SC which is just on the coast. I'd definately be up for supporting you with some beer as well as getting right in there and helping out. It's just up to you man, I know that it's not a fun job. That's why I said I'd be willing to come to someone as well as buy the beer etc.

temjin9876 · 05-24-2003, 07:19 PM

did someone say beer? I'm in. j/k

you know I am always up to lend a helping hand. I have never done it either but mine are on their way and are going in in 3 weeks. Me and my mechanic are doing it so I will take notes. I am getting BBK's too.

If you need some help just e-mail me buddy

White98SVT · 05-24-2003, 07:23 PM

Quote:

Originally posted by temjin9876
did someone say beer? I'm in. j/k

you know I am always up to lend a helping hand. I have never done it either but mine are on their way and are going in in 3 weeks. Me and my mechanic are doing it so I will take notes. I am getting BBK's too.

If you need some help just e-mail me buddy

Sweet man you're the man

If you and your mechanic are doing them, how much is he charging you? Heck, if he'd swing me a cheap deal then we could do that or by all means if after your install you think you can handle it with me and a person or two then let me know. I figure it would take about a weekend or so maybe so who knows.

Thanks a ton for the offer Mike

temjin9876 · 05-24-2003, 08:29 PM

no problem

he is probably doing it for around $400-500...it kinda depends on his mood

He has done two catbacks for me for $40 together! It really depends on a lot of factors. After the install I will probably have enough info to help out to save you some dough if this is too much. My buddy (who has a nice '68 289) said he can help you too. He has access to lots of tools in case you need some.

do you have jackstands or access to a lift and are you doing this down at school or in Powder Springs?

all I need is like two-weeks notice so I can make sure I am off of work.

p.s. Where are you getting yours? Mine were $811 shipped (ceramic coated w/ catted h-pipe) at fastlane motorsports using our 15% discount

White98SVT · 05-25-2003, 10:51 AM

Wow man $400-500 is a little high for me

. If I did this I would be doing it at home. I've got tons of jackstands and a couple floor jacks but no access to a lift. However, I am friends with the parts manager at Ford down here and if I could do it on a Saturday, I could get access to a lift and power tools possibly but it would have to be down here. I think that I could easily get more help up in Atlanta so more than likely that's where I would do it.

I'll be able to give you plenty of notice as to when I'm going to do it. I'm actually trying to work out a deal on some used ones simply because it will be a lot cheaper than buying new ones. Probably save me around 300 or so bucks so that's what I'm going to do.

smashedheadcat · 05-25-2003, 01:07 PM

I did my swap with basic hand tools, a floor jack, and 4 jackstands. I can't remember exactly how long it took me, but I've definatley gotten a lot faster at it. I've always left the K-member installed. I can do it all by myself in about 6 hours I think. Or in that neighborhood. I did my clutch (removing headers, trans, driveshaft, replacing clutch, flywheel) and putting everything back together in about 8 hours I think. It's really not too hard of an install. It can be a PINTA, but a lot of time is spent removing easy things. Like air induction and all that. And, trying to maneuver the headers up in there. It can be done. Just try to start all the bolts first. Oh, if you ever are going to pay more than $300 for a header job, bring the car up here, and i'll do it. It's not that big of a deal. I'm always looking for a way to meet everyone, and possibly help out in any way I can. If I can save someone $500 then that'd be all the better.

White98SVT · 05-25-2003, 02:59 PM

Quote:

Originally posted by smashedheadcat
I did my swap with basic hand tools, a floor jack, and 4 jackstands. I can't remember exactly how long it took me, but I've definatley gotten a lot faster at it. I've always left the K-member installed. I can do it all by myself in about 6 hours I think. Or in that neighborhood. I did my clutch (removing headers, trans, driveshaft, replacing clutch, flywheel) and putting everything back together in about 8 hours I think. It's really not too hard of an install. It can be a PINTA, but a lot of time is spent removing easy things. Like air induction and all that. And, trying to maneuver the headers up in there. It can be done. Just try to start all the bolts first. Oh, if you ever are going to pay more than $300 for a header job, bring the car up here, and i'll do it. It's not that big of a deal. I'm always looking for a way to meet everyone, and possibly help out in any way I can. If I can save someone $500 then that'd be all the better.

Honestly that $500 ballpark is common in Atlanta for a LT install on a 4V. In all honesty, if you can do it and have done it so many times then I'm all for making a road trip up there. Like I said I'd be more than willing to buy beer, dinner etc. It's just that I'm a litle worried about going at it alone. Some of the guys I hang with around here have done LT's but they've all been on Fox body 5.0's which are different as we both know. I will probably be looking at a late July early August install. That's probably about the time I'll be able to get the cash etc. If you don't mind, I'd make the trip.

temjin9876 · 05-25-2003, 06:31 PM

maybe both me and steve can drive up there and we can all put each others on. sounds like a pizza and beer party to me

I appreciate the offer

smashedheadcat · 05-25-2003, 10:13 PM

I'm always looking for a getaway, so do you guys think it'd be easier if I came to you guys?? I can do that instead of the both of ya making a long road trip out of it. I'll do it for gas money.

Late July/early August sounds good. Just as long as it's not on August 8th (that's my g/f's birthday).

White98SVT · 05-26-2003, 09:55 AM

Quote:

Originally posted by smashedheadcat
I'm always looking for a getaway, so do you guys think it'd be easier if I came to you guys?? I can do that instead of the both of ya making a long road trip out of it. I'll do it for gas money. Late July/early August sounds good. Just as long as it's not on August 8th (that's my g/f's birthday).

It's up to you man, I'm very willing to pay for your gas etc. I did a quick mapquest on our locations and the drive is about 9-10 hours from your location in NC to Atlanta. I can't do it around August 4th simply because it's my birthday

If we did it in Atlanta we could do it at my parent's house since I'm living away from there. If we did it at where I go to school, I could maybe get my buddy's garage at his house possibly.

Mike would you want to wait on the install or are you itching to get those bad boys put on?

temjin9876 · 05-26-2003, 04:53 PM

I just might wait then. I could split the gas money for him with you steve. if you want. My girlfriend can supply the pizza (pizza hut manager...always a plus

)

hehe...sounds like a good idea and a helluva fun weekend

White98SVT · 05-26-2003, 07:55 PM

Quote:

Originally posted by temjin9876
I just might wait then. I could split the gas money for him with you steve. if you want. My girlfriend can supply the pizza (pizza hut manager...always a plus )

hehe...sounds like a good idea and a helluva fun weekend

Pizza Hut manager...sweet. I'd definately split the gas money with you no problem

White98SVT · 05-27-2003, 12:12 AM

Well I've actually got a few places that we could do the work at. Only problem is some people have more tools than others but most have air compressors so that should help out somewhat.

If this does happen, we should be well covered.

Shooting for a late July time frame seems like the best thing. Maybe a weekend install?

05-22-2003, 01:15 PM	#1
White98SVT Registered User Join Date: Sep 2001 Location: Powder Springs , GA Posts: 347	Anyone close to GA want to help me out??? Well I decided to go all out and try and get some BBK LT's as soon as I can. The thing is, I've never done this before. So I thought I'd put out a feeler to see if anyone close to GA that has done this could and would lend a helping hand. Within a reasonable distance I would be very willing to drive to you so you're not out. Plus supply some beer, food to cook out etc. Don't feel obligated, just wanted to see. Thanks. PS--Right now I'm actually in SE GA near Savannah at school so I'm pretty close to most of the SE, at least the coastal areas. __________________ Mods........yep I have some 98Cobra #1048 of 5174 AIM: stcldsaus

05-23-2003, 03:51 AM	#2
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	I would do the whole swap for ya, but I'm up here in Eastern North Carolina. I'll always turn wrenches for beer. __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

05-24-2003, 07:19 PM	#4
temjin9876 Registered User Join Date: Oct 2001 Location: capital of the dirty south...atlanta Posts: 134	did someone say beer? I'm in. j/k you know I am always up to lend a helping hand. I have never done it either but mine are on their way and are going in in 3 weeks. Me and my mechanic are doing it so I will take notes. I am getting BBK's too. If you need some help just e-mail me buddy __________________ Smell the 93 octane New Redfire 03 in the stable! 98 Black Cobra Coupe (sold RIP) Mods: Steeda Sport Springs, K&N Filter, Flowmaster 2-chambers, King Cobra Clutch, Steeda Tri-Ax, FMS 4.10 Ring and Pinion, FMS Aluminum Driveshaft, clear corners, Steeda Underdrive Pulleys, Heavy Duty Steeda rear uppers, 100mm Densecharger full length CAI, Royal Purple, FR500 Steering wheel, Kenny Brown sub-frame connectors, Tokico Illuminas, Steeda LCA's, Bassani X-pipe w/cats, C&L 80mm mass air

05-24-2003, 08:29 PM	#6
temjin9876 Registered User Join Date: Oct 2001 Location: capital of the dirty south...atlanta Posts: 134	no problem he is probably doing it for around $400-500...it kinda depends on his mood He has done two catbacks for me for $40 together! It really depends on a lot of factors. After the install I will probably have enough info to help out to save you some dough if this is too much. My buddy (who has a nice '68 289) said he can help you too. He has access to lots of tools in case you need some. do you have jackstands or access to a lift and are you doing this down at school or in Powder Springs? all I need is like two-weeks notice so I can make sure I am off of work. p.s. Where are you getting yours? Mine were $811 shipped (ceramic coated w/ catted h-pipe) at fastlane motorsports using our 15% discount __________________ Smell the 93 octane New Redfire 03 in the stable! 98 Black Cobra Coupe (sold RIP) Mods: Steeda Sport Springs, K&N Filter, Flowmaster 2-chambers, King Cobra Clutch, Steeda Tri-Ax, FMS 4.10 Ring and Pinion, FMS Aluminum Driveshaft, clear corners, Steeda Underdrive Pulleys, Heavy Duty Steeda rear uppers, 100mm Densecharger full length CAI, Royal Purple, FR500 Steering wheel, Kenny Brown sub-frame connectors, Tokico Illuminas, Steeda LCA's, Bassani X-pipe w/cats, C&L 80mm mass air

05-25-2003, 10:51 AM	#7
White98SVT Registered User Join Date: Sep 2001 Location: Powder Springs , GA Posts: 347	Wow man $400-500 is a little high for me . If I did this I would be doing it at home. I've got tons of jackstands and a couple floor jacks but no access to a lift. However, I am friends with the parts manager at Ford down here and if I could do it on a Saturday, I could get access to a lift and power tools possibly but it would have to be down here. I think that I could easily get more help up in Atlanta so more than likely that's where I would do it. I'll be able to give you plenty of notice as to when I'm going to do it. I'm actually trying to work out a deal on some used ones simply because it will be a lot cheaper than buying new ones. Probably save me around 300 or so bucks so that's what I'm going to do. __________________ Mods........yep I have some 98Cobra #1048 of 5174 AIM: stcldsaus

05-25-2003, 01:07 PM	#8
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	I did my swap with basic hand tools, a floor jack, and 4 jackstands. I can't remember exactly how long it took me, but I've definatley gotten a lot faster at it. I've always left the K-member installed. I can do it all by myself in about 6 hours I think. Or in that neighborhood. I did my clutch (removing headers, trans, driveshaft, replacing clutch, flywheel) and putting everything back together in about 8 hours I think. It's really not too hard of an install. It can be a PINTA, but a lot of time is spent removing easy things. Like air induction and all that. And, trying to maneuver the headers up in there. It can be done. Just try to start all the bolts first. Oh, if you ever are going to pay more than $300 for a header job, bring the car up here, and i'll do it. It's not that big of a deal. I'm always looking for a way to meet everyone, and possibly help out in any way I can. If I can save someone $500 then that'd be all the better. __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

05-25-2003, 06:31 PM	#10
temjin9876 Registered User Join Date: Oct 2001 Location: capital of the dirty south...atlanta Posts: 134	maybe both me and steve can drive up there and we can all put each others on. sounds like a pizza and beer party to me I appreciate the offer __________________ Smell the 93 octane New Redfire 03 in the stable! 98 Black Cobra Coupe (sold RIP) Mods: Steeda Sport Springs, K&N Filter, Flowmaster 2-chambers, King Cobra Clutch, Steeda Tri-Ax, FMS 4.10 Ring and Pinion, FMS Aluminum Driveshaft, clear corners, Steeda Underdrive Pulleys, Heavy Duty Steeda rear uppers, 100mm Densecharger full length CAI, Royal Purple, FR500 Steering wheel, Kenny Brown sub-frame connectors, Tokico Illuminas, Steeda LCA's, Bassani X-pipe w/cats, C&L 80mm mass air

05-25-2003, 10:13 PM	#11
smashedheadcat Registered User Join Date: Oct 2001 Location: Geneva, Switzerland Posts: 1,727	I'm always looking for a getaway, so do you guys think it'd be easier if I came to you guys?? I can do that instead of the both of ya making a long road trip out of it. I'll do it for gas money. Late July/early August sounds good. Just as long as it's not on August 8th (that's my g/f's birthday). __________________ Josh 2003 Oxford White Cobra Coupe Twin Turbo Solid Axle Automatic Return Fuel System 1997 Triple Black Cobra Convertible Forged and Blown. 511rwhp 398 rwtq Sold

05-26-2003, 04:53 PM	#13
temjin9876 Registered User Join Date: Oct 2001 Location: capital of the dirty south...atlanta Posts: 134	I just might wait then. I could split the gas money for him with you steve. if you want. My girlfriend can supply the pizza (pizza hut manager...always a plus ) hehe...sounds like a good idea and a helluva fun weekend __________________ Smell the 93 octane New Redfire 03 in the stable! 98 Black Cobra Coupe (sold RIP) Mods: Steeda Sport Springs, K&N Filter, Flowmaster 2-chambers, King Cobra Clutch, Steeda Tri-Ax, FMS 4.10 Ring and Pinion, FMS Aluminum Driveshaft, clear corners, Steeda Underdrive Pulleys, Heavy Duty Steeda rear uppers, 100mm Densecharger full length CAI, Royal Purple, FR500 Steering wheel, Kenny Brown sub-frame connectors, Tokico Illuminas, Steeda LCA's, Bassani X-pipe w/cats, C&L 80mm mass air

05-27-2003, 12:12 AM	#15
White98SVT Registered User Join Date: Sep 2001 Location: Powder Springs , GA Posts: 347	Well I've actually got a few places that we could do the work at. Only problem is some people have more tools than others but most have air compressors so that should help out somewhat. If this does happen, we should be well covered. Shooting for a late July time frame seems like the best thing. Maybe a weekend install? __________________ Mods........yep I have some 98Cobra #1048 of 5174 AIM: stcldsaus

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search