using subframes with side exit exhaust

94venom · 08-12-2003, 12:48 PM

Being a "newbie" on this board, I have posted this question in the 5.0 tech section, and did so before I found this section dedicated to suspension. I have a 94 Cobra in need of help. I have a need of subframe connectors (or something) to stop roof wrinkles. I have added a strut tower brace, and it has helped slow down the "growth" of the wrinkles, but it did not stop it. Summitt and Steeda both have told me that they do not have any type of subframes that will work with side exit exhaust (SVO style). Is there somewhere else I need to look? Any advice is appreciated.

Calvin_1976 · 08-12-2003, 01:26 PM

What about in the floor subframe connectors? Either DIY or Griggs.

94venom · 08-12-2003, 01:29 PM

I am not familiar with in the floor? Do they bolt onto the bottom of the floor pan? What are some websites that I could check? Thanks for the info!

Calvin_1976 · 08-12-2003, 01:36 PM

Check out these links.

Griggs kit (I think) http://www.dariusrudis.com/mustang/subframes/

DIY http://people.ucsc.edu/~kbrandt/must...ernalSFC.shtml

GUMBALL · 06-29-2004, 12:39 PM

Quote:

Originally Posted by 94venom

Being a "newbie" on this board, I have posted this question in the 5.0 tech section, and did so before I found this section dedicated to suspension. I have a 94 Cobra in need of help. I have a need of subframe connectors (or something) to stop roof wrinkles. I have added a strut tower brace, and it has helped slow down the "growth" of the wrinkles, but it did not stop it. Summitt and Steeda both have told me that they do not have any type of subframes that will work with side exit exhaust (SVO style). Is there somewhere else I need to look? Any advice is appreciated.

Kenny Brown makes an "Extreme Matrix System" that consists of subframes, matrix braces and jacking rails. Unfortunately, to install them, the side pipes must be temporarily removed, as these are a weld-on.

Levi · 06-29-2004, 12:55 PM

Quote:

Originally Posted by GUMBALL

Kenny Brown makes an "Extreme Matrix System" that consists of subframes, matrix braces and jacking rails. Unfortunately, to install them, the side pipes must be temporarily removed, as these are a weld-on.

Yea and I am also going with the Dr.Gas SpinTech side exit exhaust. Should be awesome.

08-12-2003, 12:48 PM	#1
94venom Registered User Join Date: Aug 2003 Location: Morganton, NC Posts: 37	using subframes with side exit exhaust Being a "newbie" on this board, I have posted this question in the 5.0 tech section, and did so before I found this section dedicated to suspension. I have a 94 Cobra in need of help. I have a need of subframe connectors (or something) to stop roof wrinkles. I have added a strut tower brace, and it has helped slow down the "growth" of the wrinkles, but it did not stop it. Summitt and Steeda both have told me that they do not have any type of subframes that will work with side exit exhaust (SVO style). Is there somewhere else I need to look? Any advice is appreciated.

08-12-2003, 01:26 PM	#2
Calvin_1976 Registered User Join Date: May 2002 Location: NC Posts: 247	What about in the floor subframe connectors? Either DIY or Griggs. __________________ 91 BMW 318is 03 Buell XB9R Upgrade the driver

08-12-2003, 01:36 PM	#4
Calvin_1976 Registered User Join Date: May 2002 Location: NC Posts: 247	Check out these links. Griggs kit (I think) http://www.dariusrudis.com/mustang/subframes/ DIY http://people.ucsc.edu/~kbrandt/must...ernalSFC.shtml __________________ 91 BMW 318is 03 Buell XB9R Upgrade the driver

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-12-2003, 01:29 PM	#3
94venom Registered User Join Date: Aug 2003 Location: Morganton, NC Posts: 37	I am not familiar with in the floor? Do they bolt onto the bottom of the floor pan? What are some websites that I could check? Thanks for the info!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)