Crower Cams?

InfamousSVT · 12-09-2004, 09:25 PM

Just wondering if anyone has put in a set of cams in their 03'/04' Cobra? I've been looking at the Crower cams and was wondering if you replaced the springs and what cams you got? If anyone has these or has any info on this I'd really appreciate it!
Thanks in advance!

-Jason

Twice Bitten · 12-13-2004, 10:18 PM

**Firme** · 12-14-2004, 11:13 AM

not to boost Larry's ego, but here is his car.

Video 1

Video 2

InfamousSVT · 12-14-2004, 05:53 PM

So what lifts do you have? Did you also have head work done or just put in some cams?

Video was sweet!

Mrs TwiceBitten · 12-16-2004, 08:24 AM

Quote:

Originally Posted by InfamousSVT

So what lifts do you have? Did you also have head work done or just put in some cams?

Video was sweet!

All of the cam info is propietary, they are custom grinds made for me by crower. Did a little head work. Ditchen' the KBell for a huge Whipple right now.

Butcher · 12-17-2004, 03:38 AM

Quote:

Originally Posted by InfamousSVT

Just wondering if anyone has put in a set of cams in their 03'/04' Cobra? I've been looking at the Crower cams and was wondering if you replaced the springs and what cams you got? If anyone has these or has any info on this I'd really appreciate it!
Thanks in advance!

-Jason

Do the head work first. Compliment the headwork with a good custom grind. Crower is a reputable company that should do it. You have a 2003 - 2004 MOD motor. Set it up.

Jimmie

Butcher · 12-17-2004, 03:41 AM

Quote:

Originally Posted by Mrs TwiceBitten

All of the cam info is propietary, they are custom grinds made for me by crower. Did a little head work. Ditchen' the KBell for a huge Whipple right now.

Ouch

KBell is a good choice for low end grunt. Actual powerband, though it fails for 1/4 mile work

In other words, what she said.

Jimmie

InfamousSVT · 12-17-2004, 09:33 PM

I've emailed Crower, but for now I'm going with the Whipple! I'll be installing it sometime around April 05' and then after that I'll be looking at the Port and Polished heads and a set of Cams. I'm looking at somewhere between 600 - 650rwhp!!

NewFoundPower · 12-18-2004, 12:42 PM

Don't know if you all have heard or not but Vortech has finished their supercharger for the 03/04 Cobra. In the new MM&FF, it was pushing over 700hp but at low rpms, it had over 100 less ft/lbs of torque. Now the decision I have to make is if I want to trade low end torque for high end hp (with the Vortech) or have low end torque and trade high end hp(Kenne Bell/Whipple). Have always been a Vortech fan but then again I have always been a Flowmaster fan but got Bassanis put on the car and fell in love with them.

I guess change can be good sometimes.

-D-

kilroy · 12-19-2004, 05:46 AM

Quote:

Originally Posted by Mrs TwiceBitten

~ Ditchen' the KBell for a huge Whipple right now.

3.3 Whipple? Are they available in Ford trim? I've got a video of one on a Holden Monaro running down under... whicked stuff.

12-09-2004, 09:25 PM	#1
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	Crower Cams? Just wondering if anyone has put in a set of cams in their 03'/04' Cobra? I've been looking at the Crower cams and was wondering if you replaced the springs and what cams you got? If anyone has these or has any info on this I'd really appreciate it! Thanks in advance! -Jason __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

12-13-2004, 10:18 PM	#2
Twice Bitten Registered User Join Date: Jun 2003 Location: Northwest Houston Posts: 1,860	__________________ Preserve Democracy....have your liberals spayed and neutered

12-14-2004, 05:53 PM	#4
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	So what lifts do you have? Did you also have head work done or just put in some cams? Video was sweet! __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

12-17-2004, 09:33 PM	#8
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	I've emailed Crower, but for now I'm going with the Whipple! I'll be installing it sometime around April 05' and then after that I'll be looking at the Port and Polished heads and a set of Cams. I'm looking at somewhere between 600 - 650rwhp!! __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

12-18-2004, 12:42 PM	#9
NewFoundPower Registered User Join Date: Sep 2004 Location: wilmington, nc Posts: 326	Don't know if you all have heard or not but Vortech has finished their supercharger for the 03/04 Cobra. In the new MM&FF, it was pushing over 700hp but at low rpms, it had over 100 less ft/lbs of torque. Now the decision I have to make is if I want to trade low end torque for high end hp (with the Vortech) or have low end torque and trade high end hp(Kenne Bell/Whipple). Have always been a Vortech fan but then again I have always been a Flowmaster fan but got Bassanis put on the car and fell in love with them. I guess change can be good sometimes. -D- __________________ *#2470 of 3768* JLT CAI in Silver MGW T-56 Shifter *Bassani Cat-back* *MAC H-Pipe with Hi-flow Cats* *SS Bumper Inserts* *Kenny Brown Springs* *Kenny Brown C/C Plates* *Kenny Brown IRS Bushings* *DS-G3s*

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search