JLT What the........!!!

[03slidewayzSVT]

2.2 your wrong Torrey busted a 1.9 at Mooresville with a 7.8 @ 95MPH on street tires!!!! Crush all I have is 2.8 RR pulley, 4 piece billetflow Idler's, Mac Off-road H-pipe and JLT CAI.... and of course The best tune by PRO-DYNO

[blk04cobra1]

congrats buddy...you're a better driver than I thought

[03slidewayzSVT]

Thanks would you believe that was only my second time at any drag strip!!!! Rockingham here I come hoping for 11's on street tire's (hopefully) If not so what it's all fun just as long as nothing breaks

[InfamousSVT]

Originally Posted by NO 5 OH

And why would that be exactly? I thought generally the more horsepower you make, the bigger the filter needed to be

I see that you bought Jason's old JLT kit. From the pictures I see what you did wrong... apparently Jason didn't tell you what needed to be done in order to make it work. What you have to do is cut the four bolt mounting flange completely OFF the front of the meter... really all you have to do is cut off the square corners and smooth up the end of the MAF. The filter HAS to fit directly on the end of the meter in order to fit. I had to take an addtional 1" off the bottom of the hardpipe itself (sawsall and some grinding) in order to get everything in the fenderwell and the slash sheild to fit properly. It still doesn't go up like it did from the factory, but it's damn close You'll probably also have to trim one of the intercooler lines in the fenderwell going to the heat exchanger as it's a little too long to get the filter to fit.

You can also forgoe all of this and call Jay and get a six inch filter and it will fit in there with no modification to the end of the MAF. I think a six inch filter is between 40 and 50 bucks. Either way will fix your problem

Hope this helps,

Shannon

Hey hey man, come on now . He called me that night and I told him exactly what you just wrote. I forgot all about that until he called me about it. The only reason I know this stuff is cause you are the one who I asked about installing mine........haha

Oh well


Glad you got it worked out Adam and glad that you picked up some hp

[03slidewayzSVT]

Thanks Jason, I had to cut the MAF and just push hard but I did get it to fit Car picked up 25 rwhp and 10 rwtq across the board

[mkkrs1]

why go to rockingham, bring it to carolina on the 25th and race with rest of us

[03slidewayzSVT]

Like I said I'd like to go but it's my fathers b-day and we are taking the boat out for the first time this year and having a cook out too....maybe the next one