WNC Thread...... - Page 5

34Ford · 08-18-2003, 05:27 PM

Robert, Rick,

I went to that tire store you mentioned a while ago and had those ugly a** wheel weights removed.
Much better.

Now I can clean the wheels ALL the way around.

I should have called you and came by.

Dennis

STANGBUM · 08-19-2003, 07:50 AM

Its about time, that should look alot better. Thats not one of Fords better ideas..
Now if we can get Robert to get his done

Dennis if you are not doing anything Saturday morning , Robert and I (is that correct grammer?) are detailing a truck at his house. Come visit us.

Its work I know, but if you stay back far enough you won't break out.

STANGBUM · 08-19-2003, 07:53 AM

Hey Dennis just noticed your avatar, thats not a Mustang is it?

34Ford · 08-19-2003, 02:08 PM

About what time you guys starting on this truck?
Ill come out if its dry weather.

What avatar?

STANGBUM · 08-19-2003, 03:08 PM

We will prolly start around 9 or 10, I think. Robert will pick the truck up @ 7, but I not going that early.

You will come out if its dry weather?

Are ya gonna melt if it rains?

STANGBUM · 08-19-2003, 03:33 PM

Dennis,
I got the Cobra bumper inserts off ebay

I will give them to you as soon as possible and you can do your thing

34Ford · 08-19-2003, 08:57 PM

Just got in from rubbing on the stang

Is Robert hearing this

Very good, I will be glad to scan those fonts right away.

34Ford · 08-25-2003, 05:24 PM

Rick,

You going to be putting these stickers on your Cobra that you bought?
Reason I ask is, these fonts they sent you are not symetrical at all. I noticed that when I started using the calipers on them.

Unless the word COBRA is that outta whack on everyones bumpers.

If you are going to put them on, I would like to see how you like the fit of them before I make a copy of them. I'd hate to make a set that crooked

Dennis

STANGBUM · 08-26-2003, 07:09 AM

Quote:

Originally posted by 34Ford
Rick,

You going to be putting these stickers on your Cobra that you bought?
Reason I ask is, these fonts they sent you are not symetrical at all. I noticed that when I started using the calipers on them.

Unless the word COBRA is that outta whack on everyones bumpers.

If you are going to put them on, I would like to see how you like the fit of them before I make a copy of them. I'd hate to make a set that crooked

Dennis

The stickers that I bought I will not be putting on. The ones that you are going to make I will.

STANGBUM · 08-26-2003, 07:12 AM

Dennis,
Go ahead and make them like they are and We will see on the fit. I will pay you for them no matter what

The back bumper is kinda curved I think.

STANGBUM · 08-26-2003, 07:15 AM

Or if you get a chance, come by the house and we will look at the situation.

34Ford · 08-26-2003, 07:23 AM

If you need the ones you bought, I can bring them to you.

But I have to tell ya, having to pay $1.80 for gas SUCKS!!!

Your bumper being curved is no problem. Its just each letter is cockeyed

I should have come over last night, while the wife was out with her friend. You free in the evenings?

STANGBUM · 08-26-2003, 07:43 AM

Quote:

Originally posted by 34Ford
If you need the ones you bought, I can bring them to you.

But I have to tell ya, having to pay $1.80 for gas SUCKS!!!

Your bumper being curved is no problem. Its just each letter is cockeyed

I should have come over last night, while the wife was out with her friend. You free in the evenings?

I payed $1.84 this morning.

And yes I am free this afternoon, anytime after4PM.

So come on by and we will figure this out..

34Ford · 08-26-2003, 05:02 PM

Dont look for me today.

I had to run the cnc today, and overtime, something I haven't had to do in years, and it was 90 degrees in the shop!

Now Im in the COOL house with a glass of 7up and the new Twin Towers DVD, so Im not going outside now

Ill see you later.

Dennis

STANGBUM · 08-27-2003, 07:03 AM

Hey Dennis
"Twin Towers" is that a new movie that just came out?

Talk to Robert last nite, He drove some yesterday, feeling better. still a little weak. Said he will prolly be at the show Friday and for sure will go to the Sat. show (Canton Labor day show) if he has no more problems.

08-18-2003, 05:27 PM	#61
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	No unsightly wheel weights Robert, Rick, I went to that tire store you mentioned a while ago and had those ugly a wheel weights removed. Much better. Now I can clean the wheels ALL** the way around. I should have called you and came by. Dennis __________________ Steeda Tri-Ax MRT Springs 2 1/2" Flowmasters MRT Street Smart CAI AFS 18x9 wheels Nitto triple 5's --------------------------------------- Click here to see my 03 Mach 1 and '34 coupe Blue Ridge Mustang Club of Asheville brmcoa.org

08-19-2003, 07:50 AM	#62
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Its about time, that should look alot better. Thats not one of Fords better ideas.. Now if we can get Robert to get his done Dennis if you are not doing anything Saturday morning , Robert and I (is that correct grammer?) are detailing a truck at his house. Come visit us. Its work I know, but if you stay back far enough you won't break out. __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

08-19-2003, 07:53 AM	#63
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Hey Dennis just noticed your avatar, thats not a Mustang is it? __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

08-19-2003, 02:08 PM	#64
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	Detailing About what time you guys starting on this truck? Ill come out if its dry weather. What avatar?

08-19-2003, 03:08 PM	#65
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	We will prolly start around 9 or 10, I think. Robert will pick the truck up @ 7, but I not going that early. You will come out if its dry weather? Are ya gonna melt if it rains? __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

08-19-2003, 03:33 PM	#66
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Dennis, I got the Cobra bumper inserts off ebay I will give them to you as soon as possible and you can do your thing __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

08-19-2003, 08:57 PM	#67
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	Whew, Just got in from rubbing on the stang Is Robert hearing this Very good, I will be glad to scan those fonts right away.

08-25-2003, 05:24 PM	#68
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	Rick, You going to be putting these stickers on your Cobra that you bought? Reason I ask is, these fonts they sent you are not symetrical at all. I noticed that when I started using the calipers on them. Unless the word COBRA is that outta whack on everyones bumpers. If you are going to put them on, I would like to see how you like the fit of them before I make a copy of them. I'd hate to make a set that crooked Dennis

08-26-2003, 07:12 AM	#70
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Dennis, Go ahead and make them like they are and We will see on the fit. I will pay you for them no matter what The back bumper is kinda curved I think. __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

08-26-2003, 07:15 AM	#71
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Or if you get a chance, come by the house and we will look at the situation. __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

08-26-2003, 07:23 AM	#72
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	If you need the ones you bought, I can bring them to you. But I have to tell ya, having to pay $1.80 for gas SUCKS!!! Your bumper being curved is no problem. Its just each letter is cockeyed I should have come over last night, while the wife was out with her friend. You free in the evenings?

08-26-2003, 05:02 PM	#74
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	Dont look for me today. I had to run the cnc today, and overtime, something I haven't had to do in years, and it was 90 degrees in the shop! Now Im in the COOL house with a glass of 7up and the new Twin Towers DVD, so Im not going outside now Ill see you later. Dennis

08-27-2003, 07:03 AM	#75
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Hey Dennis "Twin Towers" is that a new movie that just came out? Talk to Robert last nite, He drove some yesterday, feeling better. still a little weak. Said he will prolly be at the show Friday and for sure will go to the Sat. show (Canton Labor day show) if he has no more problems. __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)