06-24-2006, 03:57 PM | #1 |
Registered User
|
FORSALE: Black '96 Cobra w/forged motor or sell as roller
FORSALE: Black '96 Cobra w/forged motor or sell as roller
=========================================== Less than 140k miles on body and less than 10k miles on motor built by Modular Powerhouse/ProLine out of Atlanta. (Motor) 9.8:1 compression w/ Ross forged pistons Scat forged h beam rods w/ ARP rod bolts Stock forged cobra crank w/ tri metal bearings ARP head and main studs w/ billet oil pump gears and billet trigger wheel Canton race oil pan Heads are stock other than having a five angle valve job Accufab single blade throttle body 8-rib Pulley setup Reichard Racing manual A/C delete tensioner Walbro 255 intank pump Ignition is MSD 8.5 wires BBK Longtube headers Dr. Gas off-road x-pipe and Spintech ProStreet mufflers '03 Cobra T-56 6-speed tranny w/26-spline input shaft (Speedcal to adjust speedo) '03 Cobra Aluminum flywheel Spec Stage 3 26-spline 11" clutch 3.73 Gears EGR and IRMC's deleted Battery relocated to the trunk (Suspension) Ford Racing subframe connectors Eibach Sportlines up front Ford Racing B springs in the rear Koni adjustables struts up front and koni shocks in the rear Steeda 3 bolt caster camber plates Front cailpers have been polished (Body) Clear tail lights with led bulbs and clear corners Headlights was replaced at the same time and still look new Factory '94 cobra decklid and spoiler The mirrors and cowl panel have been painted to match the color on the car (Interior) Custom tan and black with '03 Cobra pedal covers Stock leather seats were trashed, so now it has stock '99 black cloth seats (Wheels) Satin Steeda UltraLite Wheels w/ almost new 17x9 rubber all the way around. READY for BOOST!!!! Will sell the car as is for $13,900 or $6500 as a roller. Title is clean and I have it in hand. Pics available upon request for serious potential buyers. Also have polished Vortech S-trim, 42 lb. injectors, Procharger 3-core intercooler, I can let go for $2500. rlong@charter.net |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|