Attn: Dan

2KWhiteSnake · 07-05-2006, 08:45 PM

Hey hey,
The motor in my 01 5.0 Big Bore 32V should be fired up tomorrow. Lester Lesneski did the rebuild. We're under tight time constraints and will need the car tuned this week/weekend. Lester called you guys today, but didn't hear anything back as of 8PM tonight. We've removed the EGR valve, so we'll need that cleared from the computer so we're not showing a "check engine" light. We'll need the MAF re-calibrated for 42lb injectors (from 31lb) as well as any fuel mapping changes for the upgraded fuel pump/tank. We have an FR500 intake also, which will take some time to calibrate when to open and close the short/long runners. (we're using an MSD window switch for this). Give Lester a call in the morning (you should have his number), or give me a call at 803-804-1908 and ask for Craig. I'd prefer for you to contact Lester to schedule because I want him there for the tune. I'll gladly haul the car, or you can bring the dyno to his shop.

I look forward to hearing from you. Tony speaks highly of you. We'll see what kind of work you can do with 450+ Naturally aspirated horses.

Craig

**Pro-Dyno** · 07-05-2006, 11:15 PM

Craig

Sound's Great sorry I missed your call we will be set up tomorrow night at custom performance in concord. I have a few ahead of you but you are welcome to bring it down (up). I spoke with Lester tonight he is awaiting a part to complete the job. After tomorrow night I will be out of the country until 7-18-06

2KWhiteSnake · 07-06-2006, 12:16 AM

If you guys can get it going tomorrow, let me know. I haven't talked to him tonight, but if he said it's cool, let's roll with it tonight.

Craig

07-05-2006, 08:45 PM	#1
2KWhiteSnake Registered User Join Date: Dec 2001 Location: Lancaster, SC Posts: 588	Attn: Dan Hey hey, The motor in my 01 5.0 Big Bore 32V should be fired up tomorrow. Lester Lesneski did the rebuild. We're under tight time constraints and will need the car tuned this week/weekend. Lester called you guys today, but didn't hear anything back as of 8PM tonight. We've removed the EGR valve, so we'll need that cleared from the computer so we're not showing a "check engine" light. We'll need the MAF re-calibrated for 42lb injectors (from 31lb) as well as any fuel mapping changes for the upgraded fuel pump/tank. We have an FR500 intake also, which will take some time to calibrate when to open and close the short/long runners. (we're using an MSD window switch for this). Give Lester a call in the morning (you should have his number), or give me a call at 803-804-1908 and ask for Craig. I'd prefer for you to contact Lester to schedule because I want him there for the tune. I'll gladly haul the car, or you can bring the dyno to his shop. I look forward to hearing from you. Tony speaks highly of you. We'll see what kind of work you can do with 450+ Naturally aspirated horses. Craig __________________ 2001 White Cobra Coupe 406RWHP/365tq with less than 5 miles on motor/ALL N/A!!! 5.0 Big Bore block by Modular Performance Engine built by Lester Lesneski at Performance Auto. FR500 Intake and Cams Every part Maximum Motorsports has to offer Setup/custom IRS changes by Lester Lesneski at Performance Automotive Banana Motorsports 4 Pt Cage and Subs 2008 Audi RS4 Daily Driver 420 HP N/A V8 with Quattro http://www.cbslimited.com/rs4.php

07-05-2006, 11:15 PM	#2
Pro-Dyno Super Moderator Join Date: Dec 2004 Location: Fort Mill, SC Posts: 696	Craig Sound's Great sorry I missed your call we will be set up tomorrow night at custom performance in concord. I have a few ahead of you but you are welcome to bring it down (up). I spoke with Lester tonight he is awaiting a part to complete the job. After tomorrow night I will be out of the country until 7-18-06 __________________

07-06-2006, 12:16 AM	#3
2KWhiteSnake Registered User Join Date: Dec 2001 Location: Lancaster, SC Posts: 588	If you guys can get it going tomorrow, let me know. I haven't talked to him tonight, but if he said it's cool, let's roll with it tonight. Craig __________________ 2001 White Cobra Coupe 406RWHP/365tq with less than 5 miles on motor/ALL N/A!!! 5.0 Big Bore block by Modular Performance Engine built by Lester Lesneski at Performance Auto. FR500 Intake and Cams Every part Maximum Motorsports has to offer Setup/custom IRS changes by Lester Lesneski at Performance Automotive Banana Motorsports 4 Pt Cage and Subs 2008 Audi RS4 Daily Driver 420 HP N/A V8 with Quattro http://www.cbslimited.com/rs4.php

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)