Ford Crate Motors

cobra9 · 07-30-2007, 11:52 AM

Does any-one have any experiance or comments about Fords crate motors?
Put one in with an e cam two months ago and after breaking it in took it to
the dyno and after the third pull made 446 hp and 430 lbs. of tq. at 5500 rpm.
Probably could have made more but the 30 lb. injectors seemed to be holding
it back. Anyway I was pleasently surprised at the numbers and the tune seems to be safe as its not running out of fuel and holding its own up to 5800 rpm.
The blower is 11 years old and still putting out a good 5 lbs. of boost. Im thinking of going with a Snow Boost Cooler in a month or so and would like to hear what you guys and girls think.

07-30-2007, 11:52 AM	#1
cobra9 Registered User Join Date: Jul 2007 Location: Hallandale Florida Posts: 4	Ford Crate Motors Does any-one have any experiance or comments about Fords crate motors? Put one in with an e cam two months ago and after breaking it in took it to the dyno and after the third pull made 446 hp and 430 lbs. of tq. at 5500 rpm. Probably could have made more but the 30 lb. injectors seemed to be holding it back. Anyway I was pleasently surprised at the numbers and the tune seems to be safe as its not running out of fuel and holding its own up to 5800 rpm. The blower is 11 years old and still putting out a good 5 lbs. of boost. Im thinking of going with a Snow Boost Cooler in a month or so and would like to hear what you guys and girls think. __________________ Cobra9 1994 Rio Red #3883 Born on 07/18/1994 New Ford e cam crate motor Powerdyne 6 lb. huffer Pro m 80 mm maf BBK 70 mm tb Ford Racing 30 lb. injectors BBK eql headers BeCool radiator Magnaflow x pipe and exaust system MSD 6al with btm Factory 5 uppers and lowers KYB AGX shocks and struts Motor sport springs 355 gears No smog pump or cats( for off road use only?)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)