Dyno day in Knoxville, TN 24th or 31st of May

tnturbo · 05-15-2003, 05:13 PM

$45 for 3 pulls can happen on either the 24th or 31st of May. Anyone interested post up. Even if you don't dyno your car you are welcome to come out and watch. Date will be determined by majority of participants vote.

Big Daddy · 05-15-2003, 06:29 PM

Well my car will be down at True Blue then getting its new engine put in...SO I won't be able to make it!

bitn03 · 05-16-2003, 08:13 PM

Count me in!!!!!!!

tnturbo · 05-16-2003, 10:05 PM

Looks like the 31st is going to be the day bitn03 how does that work for you? How about a little bit of info on your car as well? Do you know where ACC is?

Hazman · 05-16-2003, 10:17 PM

I am a new member here in Knoxville and would like to meet some other local SCMC members. Count me in. I have a 97 Cobra vert. Mods K&N and a Diablo chip. I plan to pull the chip so I can baseline before starting any mods . Either weekend would work for me. Location?

**cobrabitn** · 05-16-2003, 10:18 PM

Jeff,

We need to know all of the information on this dyno day? We have more members in TN then you probably know so if you give me details then I'll send it out to the club. We can also post it on the front of the website.

Thanks,

Tony

tnturbo · 05-16-2003, 10:53 PM

Tony, here is as much info as I can provide. If anyone has specific questions or wants a local contact my email address is jmiller74@earthlink.net Based on input from those already going, the date is going to be May 31st. The location is going to be Air Cooled Classics. ACC is located on Lexington Drive. Take the Lovell Rd. Exit off I-40. If you are on 40 west, exit Lovell Rd. make a right turn at the end of the ramp, take the next right (there is a closed down gas station there) and proceed down Lexington, stay on that road until you see the shop on the right. You will see an enclosed race car trailer sitting near the road. Once you are on Lexington, you can't miss the shop. Best place to park is in the parking lot that borders ACC on the west side. They have a dynojet dyno with wideband O2. The cost is going to be $45 (if we get enough cars, otherwise it will be $50) for 3 pulls. The guy who is coordinating all this is Don Peruski his email address is djperuski@comcast.net if you want to have your car dynoed, please send him an email. He is maintaining the "official" list of who is going to be pulling. Exact start time isn't set in stone yet, but will most likely be 10 AM. If you need to come later, that can be accomodated as well. Shop closes at 4pm.

tnturbo · 05-16-2003, 11:06 PM

For those interested, this one is definitely going to happen. If you think you want to go email me and/or Don ASAP.

bitn03 · 05-17-2003, 06:58 PM

Mods...catback, K&N.......On order is xpipe, headers, and smaller pulley. Probably won't have all completed by 31st but I will be there!!!!

bitn03 · 05-17-2003, 07:02 PM

Can I be there about 1 or 2 pm?

tnturbo · 05-17-2003, 08:51 PM

Should be fine. Go ahead and email Don and let him know what time you want to come out.

bitn03 · 05-18-2003, 08:23 PM

Thanks...see you there!!!!!!!!

tnturbo · 05-22-2003, 06:29 PM

Just bringing this back to the top and letting those already signed up know it looks like we will be getting the lower price

Still have room for a few more.

tnturbo · 05-22-2003, 06:31 PM

If anyone gets lost, the number for the shop is 777-dyno let it ring as it might be hard to hear over cars and may take a minute for someone to answer.

SlowCobra · 05-23-2003, 06:15 PM

Jeff what time are you going? I will be there after school around noon. I want to see some people put up some good numbers.

05-15-2003, 05:13 PM	#1
tnturbo Registered User Join Date: Sep 2001 Location: Knoxville, TN Posts: 313	Dyno day in Knoxville, TN 24th or 31st of May $45 for 3 pulls can happen on either the 24th or 31st of May. Anyone interested post up. Even if you don't dyno your car you are welcome to come out and watch. Date will be determined by majority of participants vote.

05-15-2003, 06:29 PM	#2
Big Daddy Registered User Join Date: Dec 2001 Location: Asheville, NC Posts: 4,885	Well my car will be down at True Blue then getting its new engine put in...SO I won't be able to make it! __________________ 2008 Shelby GT500 White w/Blue Stripes STOCK AND STAYING THAT WAY! Kenny Brown '01 Cobra S Serial # 01-047C True Blue Performance Forged Short Block FR500 Heads & Cams, Fluidyne Radiator McLeod Clutch and aluminum flywheel Aluminum Driveshaft, UPR adjustable clutch cable GT40 Fuel Tank & pumps, Kenne Bell Boost-a-Pump, 60lb injectors, Vortech T-Trim W/After Cooler, 2.9" RR Pulley Anderson Power Pipe, Accufab Throttle Body (USELESS IMHO), MGW Shifter with the blue handle KB Oil Cooling system, KB Differential Cooler Autometer Phantom boost and fuel pressure guages Kenny Brown Aero Kit, Kooks LT Headers H-Pipe with H-flow cats, Bassani Cat Back Snow Boost Cooler T56 Six Speed Tranny MGW BLING-BLING interior stuff 645RWHP and 558RWTQ

05-16-2003, 10:18 PM	#6
cobrabitn Dr Jekyll on the street, Mr Hyde on the track Join Date: Jun 2001 Location: Rock Hill SC Posts: 14,649	Jeff, We need to know all of the information on this dyno day? We have more members in TN then you probably know so if you give me details then I'll send it out to the club. We can also post it on the front of the website. Thanks, Tony __________________ Cobrabitn 2016 Ruby Red Metallic with Caribou accent F-350 Crew Cab Stump Puller! 6.7 Diesel Automatic with Chrome Package, Off Road Package, 3.55 Locking axles, and Ultimate Lariat Interior Trim Package! 2017 Shelby GT350 Coupe - track car! Mods: JLT True Cold Air oil catch can 2009 Vista Blue Shelby GT 500 Coupe - Garage Queen Tinted Windows JLT True Cold Air Kit Pro-Dyno Tune 526 rwhp - 511 rwtq 1994 Rio Red Indy Pace Car #22 "Runabout" Snake in the grill MGW shift knob 1996 SVT Cobra Wheels 1969 New Lime Mustang Mach 1 Sportsroof - Second owner - bone stock with shaker. One SVT Cobra, one Shelby GT500, one 69 mach 1, and a Shelby GT350 is better than nothing! Custom Data Plates for your Mustang or Ford! Buy "Cool Merchandise" at Data Plates Plus www.dataplatesplus.com See my MSR Video here!

05-16-2003, 08:13 PM	#3
bitn03 Registered User Join Date: Mar 2003 Location: NE Tennessee Posts: 159	Count me in!!!!!!!

05-16-2003, 10:05 PM	#4
tnturbo Registered User Join Date: Sep 2001 Location: Knoxville, TN Posts: 313	Looks like the 31st is going to be the day bitn03 how does that work for you? How about a little bit of info on your car as well? Do you know where ACC is?

05-16-2003, 10:17 PM	#5
Hazman Registered User Join Date: Sep 2002 Location: Harriman, TN Posts: 823	I am a new member here in Knoxville and would like to meet some other local SCMC members. Count me in. I have a 97 Cobra vert. Mods K&N and a Diablo chip. I plan to pull the chip so I can baseline before starting any mods . Either weekend would work for me. Location?

05-16-2003, 10:53 PM	#7
tnturbo Registered User Join Date: Sep 2001 Location: Knoxville, TN Posts: 313	Tony, here is as much info as I can provide. If anyone has specific questions or wants a local contact my email address is jmiller74@earthlink.net Based on input from those already going, the date is going to be May 31st. The location is going to be Air Cooled Classics. ACC is located on Lexington Drive. Take the Lovell Rd. Exit off I-40. If you are on 40 west, exit Lovell Rd. make a right turn at the end of the ramp, take the next right (there is a closed down gas station there) and proceed down Lexington, stay on that road until you see the shop on the right. You will see an enclosed race car trailer sitting near the road. Once you are on Lexington, you can't miss the shop. Best place to park is in the parking lot that borders ACC on the west side. They have a dynojet dyno with wideband O2. The cost is going to be $45 (if we get enough cars, otherwise it will be $50) for 3 pulls. The guy who is coordinating all this is Don Peruski his email address is djperuski@comcast.net if you want to have your car dynoed, please send him an email. He is maintaining the "official" list of who is going to be pulling. Exact start time isn't set in stone yet, but will most likely be 10 AM. If you need to come later, that can be accomodated as well. Shop closes at 4pm.

05-16-2003, 11:06 PM	#8
tnturbo Registered User Join Date: Sep 2001 Location: Knoxville, TN Posts: 313	For those interested, this one is definitely going to happen. If you think you want to go email me and/or Don ASAP.

05-17-2003, 06:58 PM	#9
bitn03 Registered User Join Date: Mar 2003 Location: NE Tennessee Posts: 159	Mods...catback, K&N.......On order is xpipe, headers, and smaller pulley. Probably won't have all completed by 31st but I will be there!!!!

05-17-2003, 07:02 PM	#10
bitn03 Registered User Join Date: Mar 2003 Location: NE Tennessee Posts: 159	Can I be there about 1 or 2 pm?

05-17-2003, 08:51 PM	#11
tnturbo Registered User Join Date: Sep 2001 Location: Knoxville, TN Posts: 313	Should be fine. Go ahead and email Don and let him know what time you want to come out.

05-18-2003, 08:23 PM	#12
bitn03 Registered User Join Date: Mar 2003 Location: NE Tennessee Posts: 159	Thanks...see you there!!!!!!!!

05-22-2003, 06:29 PM	#13
tnturbo Registered User Join Date: Sep 2001 Location: Knoxville, TN Posts: 313	Just bringing this back to the top and letting those already signed up know it looks like we will be getting the lower price Still have room for a few more.

05-22-2003, 06:31 PM	#14
tnturbo Registered User Join Date: Sep 2001 Location: Knoxville, TN Posts: 313	If anyone gets lost, the number for the shop is 777-dyno let it ring as it might be hard to hear over cars and may take a minute for someone to answer.

05-23-2003, 06:15 PM	#15
SlowCobra Registered User Join Date: Apr 2003 Location: Knoxville TN Posts: 11	Jeff what time are you going? I will be there after school around noon. I want to see some people put up some good numbers.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)