WNC Thread......

STANGBUM · 07-09-2003, 02:55 PM

Just thought I would start a thread for info in Western North Carolina
Big Daddy I saw you on here, where have you been?

Dennis will you still have your tint on Friday at the show?

Would like to see what it looks like.
and Robert, (Redfire GT) saw where you signed up,

see you this weekend.

White Venom · 07-09-2003, 02:59 PM

hello, if the weather is good i'll be at the show

STANGBUM · 07-09-2003, 03:01 PM

Rj
you said you had quit your job awhile back,

Have you found another one yet?

34Ford · 07-09-2003, 04:14 PM

Quote:

Originally posted by STANGBUM
Just thought I would start a thread for info in Western North Carolina
Big Daddy I saw you on here, where have you been?
Dennis will you still have your tint on Friday at the show?
Would like to see what it looks like.
and Robert, (Redfire GT) saw where you signed up,
see you this weekend.

Robert is finally in here, alright!

Yea, tint is on till I decide to cut it all out some later day. I had to buy a roll yesterday to do the two c pillar glass.

Dennis

Redfire GT · 07-09-2003, 10:27 PM

Yep, Dennis I am finally in here!!!!!!!! It takes me a while to make the tuff decisions. I hate the window tint did not work out as expected. Did the other windows turn out OK?

White Venom · 07-09-2003, 11:24 PM

Quote:

Originally posted by STANGBUM
Rj
you said you had quit your job awhile back,
Have you found another one yet?

no i am still looking,it sucks. if you know of any jobs please let me know

34Ford · 07-10-2003, 09:24 AM

Tuff decisions?

Well Ill let you be the judge of my tint. I did the little side glass lastnight.

I wished I had removed the dot matrix now though. Maybe someday I will do them over, figure the more I do it the more experence I get

Dennis

STANGBUM · 07-10-2003, 10:03 AM

Dennis, are you talking about the dot matrix on the upper part of the back windshield? I did not know you could remove that!

Redfire GT · 07-10-2003, 05:12 PM

New subject!! Has anyone tried the Steeda underdrive pulleys? I was thinking of getting the anodized red ones. What about other pulley manufacturers??

34Ford · 07-10-2003, 09:27 PM

Quote:

Originally posted by STANGBUM
Dennis, are you talking about the dot matrix on the upper part of the back windshield? I did not know you could remove that!

Rick,

Razor blade

Man, I wished I had taken it out. Ill show you why.

I got my Cobra radios today. Now I can't decide if I need to buy nicads and chargers for them. $30, ouch!

Hey Robert,

Did Rick send you the web address for the speedometer diagnostics?
If not its here.
http://www.mustangworld.com/ourpics/fcar/dtcodes.htm

Dennis

Redfire GT · 07-10-2003, 09:46 PM

Yep, I got it. Haven,t tried it yet. It looks pretty cool! You are coming to the show Friday night???

STANGBUM · 07-11-2003, 07:32 AM

Quote:

Originally posted by Redfire GT
New subject!! Has anyone tried the Steeda underdrive pulleys? I was thinking of getting the anodized red ones. What about other pulley manufacturers??

RFGT,
I think the green ones would be better, IMHO.

STANGBUM · 07-11-2003, 07:42 AM

Quote:

Originally posted by 34Ford

I got my Cobra radios today. Now I can't decide if I need to buy nicads and chargers for them. $30, ouch!

Hey Robert,

Did Rick send you the web address for the speedometer diagnostics?
If not its here.
http://www.mustangworld.com/ourpics/fcar/dtcodes.htm

Dennis

Hey Dennis, why didn't you get Mach 1 radios?

see ya tonight

34Ford · 07-11-2003, 09:00 AM

Quote:

Originally posted by STANGBUM
Hey Dennis, why didn't you get Mach 1 radios?
see ya tonight

At least I didn't buy Motorola

Sounds to much like Toyota.

Lets hope its not storming this evening. And its possible I will be by myself tonight. Wife has things to do with family.

Dennis

34Ford · 07-11-2003, 10:26 AM

Anybody have a new or mint Zip Zap red Mustang they wanna sell?
Epay has them for $25 + shipping.
Just thoght I would ask.

Dennis

07-09-2003, 02:55 PM	#1
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	WNC Thread...... Just thought I would start a thread for info in Western North Carolina Big Daddy I saw you on here, where have you been? Dennis will you still have your tint on Friday at the show? Would like to see what it looks like. and Robert, (Redfire GT) saw where you signed up, see you this weekend. __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

07-09-2003, 02:59 PM	#2
White Venom Registered User Join Date: Jan 2003 Location: Asheville,nc Posts: 239	hello, if the weather is good i'll be at the show __________________ 1998 crystal white cobra 4.10 gear BBK Long Tube Headers w/ shorty O/R H-pipe 40 series flowmasters w/ 3 in. turndowns FMS King Cobra clutch Steeda Tri-ax shifter Pro-M 87mm MAF WMS Velocity Tube ~ for sale lowered 2.5 in front and 2 in rear Maximum Motorsports C/C plates FMS 9mm spark plug wires w/ NGK iridium IX plug's

07-09-2003, 03:01 PM	#3
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Rj you said you had quit your job awhile back, Have you found another one yet? __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

07-10-2003, 10:03 AM	#8
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Dennis, are you talking about the dot matrix on the upper part of the back windshield? I did not know you could remove that! __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

07-10-2003, 05:12 PM	#9
Redfire GT Registered User Join Date: Jul 2003 Location: Western North Carolina Posts: 26	New subject!! Has anyone tried the Steeda underdrive pulleys? I was thinking of getting the anodized red ones. What about other pulley manufacturers?? __________________ Eibach Pro Kit, Maximum Motorsport C & C Plates, 2 Chamber Flowmasters

07-09-2003, 10:27 PM	#5
Redfire GT Registered User Join Date: Jul 2003 Location: Western North Carolina Posts: 26	Yep, Dennis I am finally in here!!!!!!!! It takes me a while to make the tuff decisions. I hate the window tint did not work out as expected. Did the other windows turn out OK?

07-10-2003, 09:24 AM	#7
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	Tuff decisions? Well Ill let you be the judge of my tint. I did the little side glass lastnight. I wished I had removed the dot matrix now though. Maybe someday I will do them over, figure the more I do it the more experence I get Dennis

07-10-2003, 09:46 PM	#11
Redfire GT Registered User Join Date: Jul 2003 Location: Western North Carolina Posts: 26	Yep, I got it. Haven,t tried it yet. It looks pretty cool! You are coming to the show Friday night??? __________________ Eibach Pro Kit, Maximum Motorsport C & C Plates, 2 Chamber Flowmasters

07-11-2003, 10:26 AM	#15
34Ford Registered User Join Date: May 2003 Location: Western North Carolina Posts: 227	WTB; ZIP ZAP Mustang Anybody have a new or mint Zip Zap red Mustang they wanna sell? Epay has them for $25 + shipping. Just thoght I would ask. Dennis

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)