Fire Extinguisher

Lumpydogs · 10-03-2003, 09:32 AM

Any suggestions on a Chrome Fire Extinguisher and mounting
hardware. I want to mount the extinguisher within reach of the driver but preferably not in the passengers way. I have an '01 Cobra that is primarily a good looking daily driver. All mods need
to look sharp and be functional. I was thinking behind the passenger seat on the side of the drive shaft hump.

This is not a track only vehicle. Although, my recent trip to Gingerman Raceway has ignited a burning desire......

97CasperCobra · 10-03-2003, 11:16 AM

One of our members designed something that replaces your center counsel door latch with a door/mount for a fire extinguisher. Really cool design that he made. I'm trying to see how much materials and a final cost would be as I wanted one as well.

bolt-on · 10-06-2003, 08:12 PM

Check out http://www.vetteworksonline.com for a bracket that slips over the passenger front seat studs and is tightened down with the OE nuts. No new holes, just a nice secure mounting of an Amerex extinguisher. Mine is chrome Halotron I. The only problem, if you can call it that, is the passenger seat travel is very limited and the seat must be nearly all the way back.

10-03-2003, 09:32 AM	#1
Lumpydogs Registered User Join Date: Sep 2003 Location: Southeast Michigan Posts: 517	Fire Extinguisher Any suggestions on a Chrome Fire Extinguisher and mounting hardware. I want to mount the extinguisher within reach of the driver but preferably not in the passengers way. I have an '01 Cobra that is primarily a good looking daily driver. All mods need to look sharp and be functional. I was thinking behind the passenger seat on the side of the drive shaft hump. This is not a track only vehicle. Although, my recent trip to Gingerman Raceway has ignited a burning desire...... __________________ Lumpydog 2001 Cobra Coupe NA Mod Motor 329 rwhp 344 rwtq www.lumpydogmotorsports.com

10-03-2003, 11:16 AM	#2
97CasperCobra GOT SVT?? Join Date: Jun 2001 Location: Lone Star State Posts: 4,890	One of our members designed something that replaces your center counsel door latch with a door/mount for a fire extinguisher. Really cool design that he made. I'm trying to see how much materials and a final cost would be as I wanted one as well. __________________ 1997 Mustang Cobra Member: "Texas Demon Hell Snakes who eat small children" secret society

10-06-2003, 08:12 PM	#3
bolt-on WingNuts Join Date: Nov 2001 Location: Cereal City, USA Posts: 273	Check out http://www.vetteworksonline.com for a bracket that slips over the passenger front seat studs and is tightened down with the OE nuts. No new holes, just a nice secure mounting of an Amerex extinguisher. Mine is chrome Halotron I. The only problem, if you can call it that, is the passenger seat travel is very limited and the seat must be nearly all the way back. __________________ Larry & Janice Bolton 1997 Crystal White Cobra Coupe (open-track ride) 1965 Tropical Turquoise Mustang 2+2 (cruise night car) 1997 Rio Red GT Convertible (MCA show pony) 2007 Vista Blue California Special (her summer daily driver)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)