Publicising our club

redsnake99 · 10-28-2003, 04:44 PM

December issue (mine arrived today) of MMFF..........
that's Whistler on page 120, sporting the club logo on the doors.
Tony's new car is on page 52.

Go SCMC!

cobragb · 10-29-2003, 04:22 PM

I saw that last night, Dave. Congrats! We already knew that Tony was famous. Or was it infamous?

But anyway, it was good reading about your drag racing abilities. You won! Of course you were the only one in your class. A win is a win!!!

White Venom · 10-30-2003, 12:22 AM

congrats, i noticed it too. i was reading it and said, wiat that our club's logo. but it said you were running a 13.94?? its alot faster right??

redsnake99 · 10-30-2003, 12:01 PM

Yes, it's faster. I made only three passes all that weekend, 2 qualifying and one on Sunday. None of them had to be fast and I didn't want to hurt the car, since Columbus, Ohio is a long way from Raleigh.

Big Daddy · 10-30-2003, 01:33 PM

Quote:

Originally posted by redsnake99
Yes, it's faster. I made only three passes all that weekend, 2 qualifying and one on Sunday. None of them had to be fast and I didn't want to hurt the car, since Columbus, Ohio is a long way from Raleigh.

I hope it's faster!! Other wise you'll just be a dot in my rearview!

STANGBUM · 10-30-2003, 02:20 PM

Greg,
speaking of dots, I think RedfireGT said he saw Issac's Car at his house earlier this week setting on a trailer.

(He lives off Mills Gap don't he?) Did Dale @ Custom Performance get through with it?Is it ready to rock & roll or still not done yet?

STANGBUM · 10-30-2003, 02:26 PM

Quote:

Originally posted by redsnake99
December issue (mine arrived today) of MMFF..........
that's Whistler on page 120, sporting the club logo on the doors.
Tony's new car is on page 52.

Go SCMC!

I got to go out and purchase a copy. What I need to do is get a subscription to it.

Big Daddy · 10-30-2003, 06:17 PM

Quote:

Originally posted by STANGBUM
Greg,
speaking of dots, I think RedfireGT said he saw Issac's Car at his house earlier this week setting on a trailer. (He lives off Mills Gap don't he?) Did Dale @ Custom Performance get through with it?Is it ready to rock & roll or still not done yet?

He had it out last Saturday night on Patton, BUT his belt was frayed and he still has an intake and throttle body to install, then he needs to have it retuned. So he's getting closer.

As for mine...I'm taking it to Custom this Saturday and dropping it off to have the fuel system upgraded (lines, rails, fittings & pump) and they are going to install my Reichard Racing 2.9" super grip pulley for my blower! Then I will retune the car and be ready to ROCK!

redsnake99 · 10-30-2003, 06:55 PM

BD, I'm sandbagging, waiting for you to sit and spin.

STANGBUM · 10-31-2003, 11:23 AM

Quote:

Originally posted by Big Daddy
He had it out last Saturday night on Patton, BUT his belt was frayed and he still has an intake and throttle body to install, then he needs to have it retuned. So he's getting closer.

As for mine...I'm taking it to Custom this Saturday and dropping it off to have the fuel system upgraded (lines, rails, fittings & pump) and they are going to install my Reichard Racing 2.9" super grip pulley for my blower! Then I will retune the car and be ready to ROCK!

Got some kid at Erwin (a friend of my sons) says he has an LX that he is bringing down to Patton to run you and Issac because he don't believe that you have that kind of rwhp, said that it couldn't be street legal if you did. Don't no what has been done to LX (said its not his but his is going to buy it!)but he wants to race me first then some of ya'll. I think he is just running his mouth, but ya never know.
Let you know more when I get some details. But sounds like you won't be down on Patton this week.

Will have to wait to you can be down.

Big Daddy · 10-31-2003, 11:33 AM

Quote:

Originally posted by redsnake99
BD, I'm sandbagging, waiting for you to sit and spin.

Hey Dave I do that REALLY WELL!

Big Daddy · 10-31-2003, 11:35 AM

Quote:

Originally posted by STANGBUM
Got some kid at Erwin (a friend of my sons) says he has an LX that he is bringing down to Patton to run you and Issac because he don't believe that you have that kind of rwhp, said that it couldn't be street legal if you did. Don't no what has been done to LX (said its not his but his is going to buy it!)but he wants to race me first then some of ya'll. I think he is just running his mouth, but ya never know.
Let you know more when I get some details. But sounds like you won't be down on Patton this week.
Will have to wait to you can be down.

Our Pecking order is first you race the '98 (RJ) IF you beat him then you race the '03 (Vance) IF you beat him then you get a crack at me...and IF (a very big IF) you beat me Isaac will run him. But I doubt he'll get past Vance.

flynfink · 10-31-2003, 11:40 AM

Quote:

Originally posted by Big Daddy
Reichard Racing 2.9" super grip pulley

Man I need me a supergrip pulley or something likie that... LOL

Hey BD, what time you coming to Charlotte on Sat.? Give a shout.

STANGBUM · 10-31-2003, 02:26 PM

Quote:

Originally posted by Big Daddy
Our Pecking order is first you race the '98 (RJ) IF you beat him then you race the '03 (Vance) IF you beat him then you get a crack at me...and IF (a very big IF) you beat me Isaac will run him. But I doubt he'll get past Vance.

I doubt he will get past me! (But I might send him down Patton first if ya'll are up for it.)He said he would run for money or titles. ( I still think he is bull sh*ting) I sent word that the car has to be in his name before titles are brought into it

I will prolly know more this afternoon as to whats up

White Venom · 11-04-2003, 08:13 PM

hey rick,
are you going this weekend to drag day?? also do you work off of brevard rd. i see you all the time on my way to work.

10-28-2003, 04:44 PM	#1
redsnake99 SCMC Member Join Date: Jun 2001 Location: NV, NY, SC Posts: 1,241	Publicising our club December issue (mine arrived today) of MMFF.......... that's Whistler on page 120, sporting the club logo on the doors. Tony's new car is on page 52. Go SCMC! __________________ Dave Stanfield - SCMC 424

10-29-2003, 04:22 PM	#2
cobragb Registered User Join Date: Sep 2001 Location: Winston Salem, NC Posts: 143	I saw that last night, Dave. Congrats! We already knew that Tony was famous. Or was it infamous? But anyway, it was good reading about your drag racing abilities. You won! Of course you were the only one in your class. A win is a win!!! __________________ '03 Torch Red Cobra Convertible FFR AC Cobra #1529

10-30-2003, 12:22 AM	#3
White Venom Registered User Join Date: Jan 2003 Location: Asheville,nc Posts: 239	congrats, i noticed it too. i was reading it and said, wiat that our club's logo. but it said you were running a 13.94?? its alot faster right?? __________________ 1998 crystal white cobra 4.10 gear BBK Long Tube Headers w/ shorty O/R H-pipe 40 series flowmasters w/ 3 in. turndowns FMS King Cobra clutch Steeda Tri-ax shifter Pro-M 87mm MAF WMS Velocity Tube ~ for sale lowered 2.5 in front and 2 in rear Maximum Motorsports C/C plates FMS 9mm spark plug wires w/ NGK iridium IX plug's

10-30-2003, 12:01 PM	#4
redsnake99 SCMC Member Join Date: Jun 2001 Location: NV, NY, SC Posts: 1,241	Yes, it's faster. I made only three passes all that weekend, 2 qualifying and one on Sunday. None of them had to be fast and I didn't want to hurt the car, since Columbus, Ohio is a long way from Raleigh. __________________ Dave Stanfield - SCMC 424

10-30-2003, 02:20 PM	#6
STANGBUM "Love that Boost" Join Date: Aug 2001 Location: Asheville,N.C. Posts: 771	Greg, speaking of dots, I think RedfireGT said he saw Issac's Car at his house earlier this week setting on a trailer. (He lives off Mills Gap don't he?) Did Dale @ Custom Performance get through with it?Is it ready to rock & roll or still not done yet? __________________ http://brmcoa.org/ 1997 Cobra #3843 Born 3/18/97 2-chamber Flowmasters cat-back Vortech S/C V2 MSD DIS4 Autometer Phantom Fuel Pressure & Boost Gauge FMS 4:10 ring & pinion Kenny Brown Subs MM Caster/Camber Plates Eibach Pro Kit Pro 5.0 shifter 401 RWHP & 396 TORQUE

10-30-2003, 06:55 PM	#9
redsnake99 SCMC Member Join Date: Jun 2001 Location: NV, NY, SC Posts: 1,241	BD, I'm sandbagging, waiting for you to sit and spin. __________________ Dave Stanfield - SCMC 424

11-04-2003, 08:13 PM	#15
White Venom Registered User Join Date: Jan 2003 Location: Asheville,nc Posts: 239	hey rick, are you going this weekend to drag day?? also do you work off of brevard rd. i see you all the time on my way to work. __________________ 1998 crystal white cobra 4.10 gear BBK Long Tube Headers w/ shorty O/R H-pipe 40 series flowmasters w/ 3 in. turndowns FMS King Cobra clutch Steeda Tri-ax shifter Pro-M 87mm MAF WMS Velocity Tube ~ for sale lowered 2.5 in front and 2 in rear Maximum Motorsports C/C plates FMS 9mm spark plug wires w/ NGK iridium IX plug's

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)