Strut tower brace & CAI

sssvtcobra · 08-02-2004, 03:33 PM

I am having a hard time figuring out what CAI intake to buy, that will go with any strut tower braces. I have called both CAI manufactures to see if they know if theirs would fit and they either said "not sure" or "no". I have also called two strut tower brace manufacturers and got the same response. I was considering the JLT true cai or the densecharger. And for strut tower braces I wanted either Kenny Brown or MM. I even called BBK about their cai, even though that wasn't one I was really interested in.

If anybody has any experience in this area and could fill me I would appreciate it.

Thank you
Jeff

mineralgsvt · 08-03-2004, 01:12 PM

I have the BBK CAI and Kenny Brown STB..

fits like a glove.. kinda snug..

If you get the KB piece, order the one for a Supercharged app.. or just talk to Rich and tell him Todd has it on his '01 vert..

Good Luck!

sssvtcobra · 08-05-2004, 12:42 AM

Thanks for the info. I will have to give Kenny Brown a call. How do you like your Kenny Brown strut tower brace and your BBK cai? Did you notice a difference with either of the two?

If anyone else has info on a strut tower brace and a cai, I would like to get as many ideas, problems or suggestions I can get before I make any purchases.

Thank you
Jeff

venomous · 08-05-2004, 07:11 AM

Have you thought about a MAC cai? Had alot of good products from MAC on our 5.0's.

08-02-2004, 03:33 PM	#1
sssvtcobra SCMC Member Join Date: Feb 2004 Location: Eugene, OR Posts: 441	Strut tower brace & CAI I am having a hard time figuring out what CAI intake to buy, that will go with any strut tower braces. I have called both CAI manufactures to see if they know if theirs would fit and they either said "not sure" or "no". I have also called two strut tower brace manufacturers and got the same response. I was considering the JLT true cai or the densecharger. And for strut tower braces I wanted either Kenny Brown or MM. I even called BBK about their cai, even though that wasn't one I was really interested in. If anybody has any experience in this area and could fill me I would appreciate it. Thank you Jeff __________________ SLP Loudmouth cat-back S.S. Bassani O/R X-pipe K&N FIPK II C/D and slotted rotors Hawk HPS pads S.S. Brake lines MM C/C plates MM Fr. & Rr. coilovers '00 R shocks Bilstein race valved struts KB rear shock tower brace MM Full Length Sub's Custom rear seat delete MGW Shifter Steeda Bumpsteer kit Steeda X2 Balljoints

08-03-2004, 01:12 PM	#2
mineralgsvt Registered User Join Date: Oct 2001 Location: Carmel, IN Posts: 8	I have the BBK CAI and Kenny Brown STB.. fits like a glove.. kinda snug.. If you get the KB piece, order the one for a Supercharged app.. or just talk to Rich and tell him Todd has it on his '01 vert.. Good Luck! __________________ Todd '01 Mineral Grey Cobra Convertible #2179 of 3384 Saleen Springs, Kenny Brown Chassis Stiffening, Bilsteins '89 LX 5.0

08-05-2004, 12:42 AM	#3
sssvtcobra SCMC Member Join Date: Feb 2004 Location: Eugene, OR Posts: 441	Thanks for the info. I will have to give Kenny Brown a call. How do you like your Kenny Brown strut tower brace and your BBK cai? Did you notice a difference with either of the two? If anyone else has info on a strut tower brace and a cai, I would like to get as many ideas, problems or suggestions I can get before I make any purchases. Thank you Jeff __________________ SLP Loudmouth cat-back S.S. Bassani O/R X-pipe K&N FIPK II C/D and slotted rotors Hawk HPS pads S.S. Brake lines MM C/C plates MM Fr. & Rr. coilovers '00 R shocks Bilstein race valved struts KB rear shock tower brace MM Full Length Sub's Custom rear seat delete MGW Shifter Steeda Bumpsteer kit Steeda X2 Balljoints

08-05-2004, 07:11 AM	#4
venomous Polk County Redneck Join Date: Feb 2003 Location: Polk County, NC Posts: 557	Have you thought about a MAC cai? Had alot of good products from MAC on our 5.0's. __________________ ~1995 "Rio Red" Cobra #3379 of 4005 2.2 Kenne Bell Blowzilla/ Flowzilla Supercharger (12# Boost), AFR 165 Aluminum Heads 61cc, TMoss Port Matched Cobra Lower, Trickflow 1.7 Roller Rockers, Crane 2031 Camshaft, 3/8" Intake Spacer, 60# Injectors, Accufab 75mm Throttle Body w/ Blank Spacer, DynoJet Wideband Commander, MSD Pro Billet Distributor, MSD Blaster Coil, SCT Big Mouth Meter BAF 2400, JLT Custom Cold Air intake, Deleted EGR/ Smog, Mac Chrome Radiator Pipes, Mac Ceramic Coated Shorty Headers, Mac O/R H-Pipe, Flowmaster Cat-Back, Pro 5.0 Shifter, Ford Racing 3:73 Gears, H&R Sport Springs, Chrome Cobra R Wheels Pro Dyno Tuned to 498 RWHP 497 RWTQ

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)