04 cobra crank pully problem

cobra04white · 01-09-2005, 05:49 PM

Has any one pulled a crank pully form a 04 cobra ? I shreded my belt and a long strand got wedged in between the crank pulley. I'm pretty sure it trashed the bearing. Is there an aftermarket pulley available that is as good as the Ford part that they want 450. for? I'm pretty sure I have voided my dealer warranty "too many modifications" Anyone out there with similar problems that can help is much appreciated. Thank you! cobra04white.

blk04cobra1 · 01-09-2005, 06:29 PM

I just installed the COG system on my '04 and the quality of the Motoblue pulleys looked excellent...I know they sell them separately, so you may wanna check it out, but Billetflow and UPR also make some good pullies...good luck, and i know how you feel about the warranty stuff, i dread going to the dealer for anything now

cobra04white · 01-09-2005, 08:01 PM

Thanks for your reply, Did you do the work your self ? need to know how to pull the crank pulley. ? Thanks.mods:slp x pipe high flow cats-loudmouth cat back-mac stright shot 95mm air kit-predator flash tuner-accfab big oval throttle boby-2.80" blower pulley-motoblue true grip idler.

blk04cobra1 · 01-09-2005, 09:17 PM

no...I wish I were that mechanical...my local shop put them on for me...so far they've worked out great, definitely sound different than the normal pulley swap...from the looks, its tight quarters down there, so you may want to seek some help...if you contact Dough at Billetflow, he can help you out

01-09-2005, 05:49 PM	#1
cobra04white Registered User Join Date: Jan 2005 Posts: 3	04 cobra crank pully problem Has any one pulled a crank pully form a 04 cobra ? I shreded my belt and a long strand got wedged in between the crank pulley. I'm pretty sure it trashed the bearing. Is there an aftermarket pulley available that is as good as the Ford part that they want 450. for? I'm pretty sure I have voided my dealer warranty "too many modifications" Anyone out there with similar problems that can help is much appreciated. Thank you! cobra04white.

01-09-2005, 06:29 PM	#2
blk04cobra1 Registered User Join Date: Nov 2004 Location: Charlotte, NC Posts: 1,374	I just installed the COG system on my '04 and the quality of the Motoblue pulleys looked excellent...I know they sell them separately, so you may wanna check it out, but Billetflow and UPR also make some good pullies...good luck, and i know how you feel about the warranty stuff, i dread going to the dealer for anything now __________________ 2004 Cobra HP Twin 67's 785rwhp on 9lbs of boost

01-09-2005, 09:17 PM	#4
blk04cobra1 Registered User Join Date: Nov 2004 Location: Charlotte, NC Posts: 1,374	no...I wish I were that mechanical...my local shop put them on for me...so far they've worked out great, definitely sound different than the normal pulley swap...from the looks, its tight quarters down there, so you may want to seek some help...if you contact Dough at Billetflow, he can help you out __________________ 2004 Cobra HP Twin 67's 785rwhp on 9lbs of boost

01-09-2005, 08:01 PM	#3
cobra04white Registered User Join Date: Jan 2005 Posts: 3	Thanks for your reply, Did you do the work your self ? need to know how to pull the crank pulley. ? Thanks.mods:slp x pipe high flow cats-loudmouth cat back-mac stright shot 95mm air kit-predator flash tuner-accfab big oval throttle boby-2.80" blower pulley-motoblue true grip idler.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)