Accufab Throttle Body

KCCobra03 · 02-01-2005, 10:05 AM

Has anyone noticed the Accufab Throttle body being a little sticky when you first push on the pedal? and How about Idle? Mine seems hyper now, it takes 10-15 seconds for it to calm down to idle after just pushing the pedal. It will idle around 1000-1200 then settle down to normal.

blk04cobra1 · 02-01-2005, 03:22 PM

Im not certain, but some said you have to adjust it a little if it's doing this...hopefully someone will chime in with a definite answer...

cobra2112 · 02-01-2005, 07:35 PM

I had the same problem with the high idle and after a couple of weeks I started to get a "idle higher than expected code" I e-mailed Accufab (not very nice people) and they told me to loosen the Throttle position sensor and hold it counterclockwise and retighten. I also double checked my vacuum hoses. The idle came down a tad with no code yet. For the sticking throttle, mine has gotten better after some miles. Still far from smooth. Good luck and let us know how you make out.

cobra04white · 02-02-2005, 12:57 AM

I had the same thing going on! as far as the sticky throttle;I noticed when the car was off,the throttle was smooth. So, I determined that there was an overabundance of vacuum happening at an idle. Plus, when my right foot has that Tendency to depress the the throttle beyond the point of reason...I was thinking that the heat created was causing the butterfly to expand a bit. When it expands it sticks. I adjusted my throttle stop on my throttle body so that it just cracked open to dissapate the vacuum. Then, I used my preditor flash tuner to go into modified perimiters and back my idle down. This has seemed to work for me. Don't know if you have a flash tuner...or a means to adjust the idle.

MODS
SLP X PIPE HIGH FLOW CATS
LOUD MOUTH CAT BACKS
MAC STRAIGHT SHOT 95mm
air kit
PREDATOR FLASH TUNER
ACCUFAB BIG OVAL THROTTLE
BODY
2.80 BLOWER PULLEY
MOTOBLUE TRUE GRIP IDLER
MOTOBLUE HEAT EXCHANGER

02-01-2005, 10:05 AM	#1
KCCobra03 Registered User Join Date: Sep 2004 Location: Kansas City Posts: 27	Accufab Throttle Body Has anyone noticed the Accufab Throttle body being a little sticky when you first push on the pedal? and How about Idle? Mine seems hyper now, it takes 10-15 seconds for it to calm down to idle after just pushing the pedal. It will idle around 1000-1200 then settle down to normal. __________________

02-01-2005, 03:22 PM	#2
blk04cobra1 Registered User Join Date: Nov 2004 Location: Charlotte, NC Posts: 1,374	Im not certain, but some said you have to adjust it a little if it's doing this...hopefully someone will chime in with a definite answer... __________________ 2004 Cobra HP Twin 67's 785rwhp on 9lbs of boost

02-01-2005, 07:35 PM	#3
cobra2112 Registered User Join Date: Jun 2004 Location: Northeast Philly Posts: 53	I had the same problem with the high idle and after a couple of weeks I started to get a "idle higher than expected code" I e-mailed Accufab (not very nice people) and they told me to loosen the Throttle position sensor and hold it counterclockwise and retighten. I also double checked my vacuum hoses. The idle came down a tad with no code yet. For the sticking throttle, mine has gotten better after some miles. Still far from smooth. Good luck and let us know how you make out. __________________ Silver 04 Coupe, Magnaflow Catback, MAC CAI, Accufab Throttlebody. H&R Sport Springs,Steeda C&C Plates, Gordsford Heat Exchanger.

02-02-2005, 12:57 AM	#4
cobra04white Registered User Join Date: Jan 2005 Posts: 3	I had the same thing going on! as far as the sticky throttle;I noticed when the car was off,the throttle was smooth. So, I determined that there was an overabundance of vacuum happening at an idle. Plus, when my right foot has that Tendency to depress the the throttle beyond the point of reason...I was thinking that the heat created was causing the butterfly to expand a bit. When it expands it sticks. I adjusted my throttle stop on my throttle body so that it just cracked open to dissapate the vacuum. Then, I used my preditor flash tuner to go into modified perimiters and back my idle down. This has seemed to work for me. Don't know if you have a flash tuner...or a means to adjust the idle. MODS SLP X PIPE HIGH FLOW CATS LOUD MOUTH CAT BACKS MAC STRAIGHT SHOT 95mm air kit PREDATOR FLASH TUNER ACCUFAB BIG OVAL THROTTLE BODY 2.80 BLOWER PULLEY MOTOBLUE TRUE GRIP IDLER MOTOBLUE HEAT EXCHANGER

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)