04 Cobra wheels w/tires

InfamousSVT · 02-27-2005, 10:59 PM

I've got a set of 17 x 10.5 Cobra wheels for the rear and also the stock set 17 x 9 for the front. Thinking about getting rid of them. I'm going to get some aftermarket rims and was wondering if anyone wants to throw some numbers at me for these?

The front two have the stock tires with 9,000 miles on them
The rears have Goodyear F1-D3 with less than 2,000 miles

Pictures of the rear 17 x 10.5 below, yes they are all chrome.

I live in Gastonia, NC will arrange to meet if the buyer is close, otherwise buyer pays shipping (prefer not to ship though)

jack · 02-27-2005, 11:23 PM

I've been looking for some factory chrome wheel for mine. How much?

RF Cobra · 02-27-2005, 11:28 PM

What did you think about the D3 and did the extra width help?

I noticed my stock rears are about down to the wear indiciators with just over 8k and that is with having babied them and I have been entertaining the idea of going with the wider 10.5 wheels.

I have no clue on numbers at this point as I haven't done any pricing.

InfamousSVT · 02-27-2005, 11:30 PM

Since you are in TN, I'll arrange to meet you half way to give them to you if you are serious about them! The back rims are pretty much brand new. I paid $400.00 for the back two rims by themselves and then $550.00 for the 2 tires!

I'm willing to let them go (all 4 with tires on them) for $1250 obo?

email----> jason.r.herd@rrd.com

-Jason

jack · 02-27-2005, 11:35 PM

I will run it by the boss tomorrow and let you know. Thanks

InfamousSVT · 02-27-2005, 11:37 PM

Quote:

Originally Posted by RF Cobra

What did you think about the D3 and did the extra width help?

I loved the extra width! IMO, it helped out with traction and the tires didn't break loose as easily, but with these cars having so much power it's pretty easy to break any tire loose!

After I get rid of these wheels and tires I'm going to get some 18" wheels, but I"m still sticking with the 10.5's in the rear with some 315's

Jack, I'm not really sure about a price I was just throwing that out there, but if you are serious about them and are willing to meet me. I'll give you a better deal than that.
Email me after you talk with the boss!

-Jason

RF Cobra · 02-28-2005, 12:04 AM

I can pick them up from you no problem. However I can not commit to anything until I see how things fall into place at work this week (should know by midweek). So if you rather deal with Jack first just let me know if you sell them or not.

It was good meeting you in Jan. in Charlotte.

Allan

InfamousSVT · 02-28-2005, 12:12 AM

I'm not taking sides and want to be fair, but who ever can meet me and come up with the money can have them!

Also, on a side note, some people running the 10.5 in the rear on the 03/04 Cobra have had some rubbing issues (lowered cars) and I'm currently running mine with a Maximum Motorsports .25" spacer which will be included. No need to get new wheel studs with the .25" spacer either, just bolt on and drive it!

Thanks again,

-Jason
jason.r.herd@rrd.com

jack · 02-28-2005, 09:46 PM

The BOSS said no.

We are finishing the basement and the money has to go for that right now. If RF Cobra does not take them, it will be about a month before i have the extra cash to buy them. Sorry but the house and wife comes first.

RF Cobra · 03-01-2005, 12:14 AM

Jack, I know where you are coming from. We still have some remodeling to finish on the house and I need to start on the baby's room soon to get it done by the end of May. Too many things to spend $$ money on and there never seems to be enough of it to go around.

RF Cobra · 03-01-2005, 12:16 AM

Ummm...Jason. Is there any tread left on those tires after drag day?

InfamousSVT · 03-01-2005, 01:29 AM

Quote:

Originally Posted by RF Cobra

Ummm...Jason. Is there any tread left on those tires after drag day?

Yeah, I didn't spin the tires in the waterbox or anything! I didn't see the need and didn't want to risk breaking a halfshaft!

cobra330 · 03-04-2005, 04:56 PM

Um...I would like to take the rears off your hands..I don't need the fronts...

.25 spacer? Not hubcentric I take it..right? I just bought extra 12mm bolts to have shaved..and was thinking 3/8 inch LFP Hubcentric spacers. You did not have any issues with the studs breaking or anything?

cobra330 · 03-04-2005, 04:59 PM

Or I will trade you my 17x9 with cash for your 17x10.5...and I can tell you where you can post these and probably sell them quick...or did you already post them there? Trust me..hit www.svtperformance.com....and the will go quick..that is if I can't talk you into the trade!

InfamousSVT · 03-06-2005, 10:42 PM

Quote:

Originally Posted by cobra330

Um...I would like to take the rears off your hands..I don't need the fronts...

.25 spacer? Not hubcentric I take it..right? I just bought extra 12mm bolts to have shaved..and was thinking 3/8 inch LFP Hubcentric spacers. You did not have any issues with the studs breaking or anything?

I got the wheel spacers from MM, and I didn't have any issues with the studs breaking or anything like that.

I really don't prefer to trade as I'm going to get some aftermarket 18" wheels for all four corners!

02-27-2005, 10:59 PM	#1
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	04 Cobra wheels w/tires I've got a set of 17 x 10.5 Cobra wheels for the rear and also the stock set 17 x 9 for the front. Thinking about getting rid of them. I'm going to get some aftermarket rims and was wondering if anyone wants to throw some numbers at me for these? The front two have the stock tires with 9,000 miles on them The rears have Goodyear F1-D3 with less than 2,000 miles Pictures of the rear 17 x 10.5 below, yes they are all chrome. I live in Gastonia, NC will arrange to meet if the buyer is close, otherwise buyer pays shipping (prefer not to ship though) __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

02-27-2005, 11:23 PM	#2
jack Registered User Join Date: Oct 2004 Location: Rutledge, TN Posts: 141	I've been looking for some factory chrome wheel for mine. How much? __________________ MGW Shifter/Red Handle 3.00 Upper Pulley JDM Air Filter Hypertech Programmer Metco Idler Pulleys Magnaflow Exhaust Next Ported S/C

02-27-2005, 11:30 PM	#4
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	Since you are in TN, I'll arrange to meet you half way to give them to you if you are serious about them! The back rims are pretty much brand new. I paid $400.00 for the back two rims by themselves and then $550.00 for the 2 tires! I'm willing to let them go (all 4 with tires on them) for $1250 obo? email----> jason.r.herd@rrd.com -Jason __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

02-27-2005, 11:35 PM	#5
jack Registered User Join Date: Oct 2004 Location: Rutledge, TN Posts: 141	I will run it by the boss tomorrow and let you know. Thanks __________________ MGW Shifter/Red Handle 3.00 Upper Pulley JDM Air Filter Hypertech Programmer Metco Idler Pulleys Magnaflow Exhaust Next Ported S/C

02-28-2005, 12:12 AM	#8
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	I'm not taking sides and want to be fair, but who ever can meet me and come up with the money can have them! Also, on a side note, some people running the 10.5 in the rear on the 03/04 Cobra have had some rubbing issues (lowered cars) and I'm currently running mine with a Maximum Motorsports .25" spacer which will be included. No need to get new wheel studs with the .25" spacer either, just bolt on and drive it! Thanks again, -Jason jason.r.herd@rrd.com __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

02-27-2005, 11:28 PM	#3
RF Cobra Registered User Join Date: Jun 2004 Location: Clemmons, NC Posts: 1,566	What did you think about the D3 and did the extra width help? I noticed my stock rears are about down to the wear indiciators with just over 8k and that is with having babied them and I have been entertaining the idea of going with the wider 10.5 wheels. I have no clue on numbers at this point as I haven't done any pricing.

02-28-2005, 12:04 AM	#7
RF Cobra Registered User Join Date: Jun 2004 Location: Clemmons, NC Posts: 1,566	I can pick them up from you no problem. However I can not commit to anything until I see how things fall into place at work this week (should know by midweek). So if you rather deal with Jack first just let me know if you sell them or not. It was good meeting you in Jan. in Charlotte. Allan

02-28-2005, 09:46 PM	#9
jack Registered User Join Date: Oct 2004 Location: Rutledge, TN Posts: 141	InfamousSVT The BOSS said no. We are finishing the basement and the money has to go for that right now. If RF Cobra does not take them, it will be about a month before i have the extra cash to buy them. Sorry but the house and wife comes first. __________________ MGW Shifter/Red Handle 3.00 Upper Pulley JDM Air Filter Hypertech Programmer Metco Idler Pulleys Magnaflow Exhaust Next Ported S/C

03-01-2005, 12:14 AM	#10
RF Cobra Registered User Join Date: Jun 2004 Location: Clemmons, NC Posts: 1,566	Jack, I know where you are coming from. We still have some remodeling to finish on the house and I need to start on the baby's room soon to get it done by the end of May. Too many things to spend $$ money on and there never seems to be enough of it to go around.

03-01-2005, 12:16 AM	#11
RF Cobra Registered User Join Date: Jun 2004 Location: Clemmons, NC Posts: 1,566	Ummm...Jason. Is there any tread left on those tires after drag day?

03-04-2005, 04:56 PM	#13
cobra330 Registered User Join Date: Nov 2003 Posts: 567	Um...I would like to take the rears off your hands..I don't need the fronts... .25 spacer? Not hubcentric I take it..right? I just bought extra 12mm bolts to have shaved..and was thinking 3/8 inch LFP Hubcentric spacers. You did not have any issues with the studs breaking or anything? __________________ Gone

03-04-2005, 04:59 PM	#14
cobra330 Registered User Join Date: Nov 2003 Posts: 567	Or I will trade you my 17x9 with cash for your 17x10.5...and I can tell you where you can post these and probably sell them quick...or did you already post them there? Trust me..hit www.svtperformance.com....and the will go quick..that is if I can't talk you into the trade! __________________ Gone

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)