New B In Ausitn Adn San Antoni Hiiiii

ffcobra · 07-03-2005, 12:22 PM

Hi there, I'm new to this site but pretty much on all the others lol. I'm 23 i'm a pd firefighter/emt but in paramedic class. I work in San Antonio but live close to austin.(outside of marble falls). I own a 97 cobra blk./ on tan. I have done many upgrades to the car i think my signature is attached. This was my first real motor build from block up.(besides the simple chevys) I did everyhting except the machine work. I also learned alot from doing this. 1. 4 cams and 4 timing chain= pain in the @ss. 2. modulars are very very expensive to build.But other than that Hi. Hope to meet everyone and have some fun. GREAT SITE

TRAVIS

**Firme** · 07-04-2005, 06:37 PM

Welcome to the site Travis

Hope you can make our next Austin Cruise.

Most of the Texas folks hang out in the South Central Forum found here:
http://www.svtcobraclub.com/forums/f...splay.php?f=42

InfamousSVT · 07-04-2005, 09:21 PM

Hello Travis and welcome to the boards!

You'll find some good info here and a even better bunch of people to hang out with........since you've done quite a bit of work of your own you should be able to give some insight and provide some info as well!

When you get a chance post some pictures of you beast!

07-03-2005, 12:22 PM	#1
ffcobra Registered User Join Date: Jul 2005 Location: horseshoe bay,tx Posts: 10	New B In Austin & San Antonio Hiiiii Hi there, I'm new to this site but pretty much on all the others lol. I'm 23 i'm a pd firefighter/emt but in paramedic class. I work in San Antonio but live close to austin.(outside of marble falls). I own a 97 cobra blk./ on tan. I have done many upgrades to the car i think my signature is attached. This was my first real motor build from block up.(besides the simple chevys) I did everyhting except the machine work. I also learned alot from doing this. 1. 4 cams and 4 timing chain= pain in the @ss. 2. modulars are very very expensive to build.But other than that Hi. Hope to meet everyone and have some fun. GREAT SITE TRAVIS __________________ blown 97 cobra w/ kenne bell 12# pulley, 020 over with probe 18cc dished pistions manely 4340 rods,arp stud kit in the entire motor all through out. 42# injectors.anderson power pipe, prom 80 maf,fluidyne radiator,denso plugs,msd wires,spec stage 2 clutch,long tube headers,bbk h-pipe,tri ax shifter, pod gauges,4:10 gears,255 fuel pump.and a tweecer chip with custom tune.i'm sure i left some out. not bad for 23 and did all the work myself with a little freind and family help lol.

07-04-2005, 09:21 PM	#3
InfamousSVT Registered User Join Date: Oct 2004 Location: Gastonia, NC Posts: 1,960	Hello Travis and welcome to the boards! You'll find some good info here and a even better bunch of people to hang out with........since you've done quite a bit of work of your own you should be able to give some insight and provide some info as well! When you get a chance post some pictures of you beast! __________________ 1994 Black on Black SVT Coupe 2004 SVT Cobra Competition Orange - SOLD 1979 Ghia Coupe - SOLD 1994 Chevy S-10 - DailyDriver

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)